• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.187-192
• /
• 2007

Impact on cylindrical surface caused by plunging breaking waves is investigated experimentally. The breaking waves are generated in a wave flume by decreasing the wave maker frequencies linearly and focusing the generated wave components at one specific location. The breaking wave packets are based on constant wave steepness spectrum. Three inclination angles of cylinder are applied to examine the effect of contact angle between cylinder and front surface of breaking waves. Also, the effect of cylinder diameter on pressure distribution and its peak value is investigated by adopting three cylinders with different diameters. The longitudinal location of cylinder is slightly moved in eight different points to find out a probable maximum value of impact pressure. The pressures and total force on cylinder surface are measured by piezo-electric pressure sensors and 3-components load cell with 30kHz sampling rate. The variation of peak impact pressures and forces is analyzed in terms of cylinder diameter, inclination angle and location. Also, the pressure distribution on cylindrical surface is examined. The cylinder location and surface position are more important parameters that govern the magnitude and shape of peak pressures, while the cylinder diameter and inclined angle are relatively insignificant. In a certain conditions, the impact phenomenon becomes very unstable which results in a large variation of measured valves in repeated runs.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.43-57
• /
• 2005

Twelve bottom sediments and three cores were collected in Juam reservoir for a study on transportation, which was controlled by particle grain size (2mm-200{\mu}m,\;200-100{\mu}m,\;100-50{\mu}m,\;50-20{\mu}m,\;<20{\mu}m), and vertical distribution of heavy metals. Sediment cores were sliced into 2 to 5 cm intervals to measure heavy metal concentrations in interstitial water and sediments with depth. Pb isotopic compositions of core samples were determined to calculate sedimentation rate. Regardless of sampling sites, levels of heavy metals and trace elements in bottom sediments are nearly constant with mean values of $14.9\;{\mu}g/g\;for\;As,\;0.81{\mu}g/g\;for\;Cd,\;30.7{\mu}g/g\;for\;Cu,\;34.7{\mu}g/g\;for\;Ni,\;63.3{\mu}g/g\;for\;Pb\;and\;87.9{\mu}g/g\;for\;Zn$. In general, Cu, Pb, Zn, Wi, and Cr in fraction of $<20{\mu}m$ exhibit the highest concentration, but content of As is the highest in grain size of $2\;mm-200\;{\mu}m$ and $200-100\;{\mu}m$. Fe and Mn occur as the dissolved compositions of the highest concentrations in interstitial waters and increase in their concentrations toward lower part of cores. On the contrary, concentrations of Zn and Cu show the highest value in the uppermost part in cores, suggesting these elements are released from reductive dissolution of hydroxides and oxidation of organic matters under different redox conditions. The highest accumulations of Cu, Ni, Pb, and Zn contents in the sediment cores are observed at 0-4 cm layers, and concentrations of Cu and Pb are especially high, implying these heavy metals are originated from anthropogenic sources. The apparent sedimentation rate estimated using unsupported $^{210}Pb$ is 0.91 cm $year^{-1}$, corresponding about 10 cm sedimentation in total depth since construction of Juam dam. These results will provide available information for management of bottom sediment in Juam reservoir.

• Korean journal of applied entomology
• /
• v.52 no.1
• /
• pp.5-12
• /
• 2013

The Hawaiian beet webworm (Spoladea recurvalis) is one of the serious insect pests found on red beet (Beta vulgaris var. conditiva) in Korea. The study was conducted to investigate the development period of S. recurvalis at various constant temperatures, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 32.5 and $35.0^{\circ}C$, with $65{\pm}5%$ RH and a photoperiod of 16L:8D. The developmental period from egg to pre-adult was 51.0 days at $17.5^{\circ}C$ and 14.6 days at $35.0^{\circ}C$. The developmental period of S. recurvalis was decreased with increasing temperature. The relationship between the developmental rate and temperature was fitted well by linear regression analysis ($R^2{\geq}0.87$). The lower developmental threshold and effective accumulative temperature of the total immature stage were $10.4^{\circ}C$ and 384.7 degree days, respectively. The nonlinear relationship between the temperature and developmental rate was well described by the Lactin model. The relationship between the cumulative frequency and normalized distributions of the developmental period for each life stage were fitted to the Weibull function with $R^2=0.63{\sim}0.87$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.306-311
• /
• 2016

Software reliability in the software development process is an important issue. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, reliability software cost model considering logarithmic and exponential fault detection rate based on observations from the process of software product testing was studied. Adding new fault probability using the Goel-Okumoto model that is widely used in the field of reliability problems presented. When correcting or modifying the software, finite failure non-homogeneous Poisson process model. For analysis of software reliability model considering the time-dependent fault detection rate, the parameters estimation using maximum likelihood estimation of inter-failure time data was made. The logarithmic and exponential fault detection model is also efficient in terms of reliability because it (the coefficient of determination is 80% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, the software developers have to consider life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.352-362
• /
• 2022

Photosynthesis and respiration of seagrasses are mainly controlled by water temperature. In this study, the photosynthetic physiology and respiratory changes of the Asian surfgrass Phyllospadix japonicus, which is mainly distributed on the eastern and southern coasts of Korea, were investigated in response to changing water temperature (5, 10, 15, 20, 25, and 30℃) by conducting mesocosm experiments. Photosynthetic parameters (maximum photosynthetic rate, P_max; compensation irradiance, I_c; and saturation irradiance, I_k) and respiration rate of surfgrass increased with rising water temperature, whereas photosynthetic efficiency (α) was fairly constant among the water temperature conditions. The P_max and I_k dramatically decreased under the highest water temperature condition (30℃), whereas the I_c and respiration rate increased continuously with the increasing water temperature. Ratios of maximum photosynthetic rates to respiration rates (P_max : R) were highest at 5℃ and declined markedly at higher temperatures with the lowest ratio at 30℃. The minimum requirement of H_sat (the daily period of irradiance-saturated photosynthesis) of P. japonicus was 2.5 hours at 5℃ and 10.6 hours at 30℃ for the positive carbon balance. Because longer H_sat was required for the positive carbon balance of P. japonicus under the increased water temperature, the rising water temperature should have negatively affected the growth, distribution, and survival of P. japonicus on the coast of Korea. Since the temperature in the temperate coastal waters is rising gradually due to global warming, the results of this study could provide insights into surfgrass responses to future severe sea warming and light attenuation.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.973-977
• /
• 2002

The pharmacokinetic of paclitaxel (1 mg/kg, i.v.) was investigated in rabbits with carbon tetrachloride-induced hepatic failure. The area under the plasma concentration-time curve (AUC) of paclitaxel was significantly (p<0.01) increased in severe carbon tetrachloride-induced hepatic failure rabbits ($1364.54{\pm}382.07$ ng/ml$\cdot$hr) compared to that of normal rabbits ($567.52{\pm}141.88$ ng/ml$\cdot$hr), but not significantly in moderate carbon tetrachloride-induced hepatic failure rabbits ($803.1{\pm}208.81$ ng/ml$\cdot$hr). The volume of distribution (Vd) (6.25$\pm$1.56 L) and the elimination rate constant($\beta$) ($0.09{\pm}0.025{\;}hr^{-1}$) of paclitaxel in severe carbon tetrachloride-induced hepatic failure rabbits were significantly (p<0.05) decreased compared to those of normal rabbits ($11.65<{\pm}2.91$L, $0.12{\pm}0.030{\;}hr^{-1}$), but not significantly in moderate carbon tetrachloride-induced hepatic failure rabbits ($9.46{\pm}2.37$ L, $0.10{\pm}0.026{\;}hr^{-1}$). Total body clearance ($CL_t$) of paclitaxel in severe carbon tetrachloride-induced hepatic failure rabbits ($0.733{\pm}0.183$ L/hr/kg) was significantly (p<0.01) decreased compared to that of normal rabbits ($1.762{\pm}0.440$ L/hr/kg), but not significantly in moderate carbon tetrachloride-induced hepatic failure rabbits ($1.245{\pm}0.311$ L/hr/kg). The half-life(t1/2) of paclitaxel in severe carbon tetrachloride-induced hepatic failure rabbits ($7.71{\pm}2.16$ hr) was significantly (p<0.05) increased compared to that of normal rabbits ($5.75{\pm}1.44$hr), but not significantly in moderate carbon tetrachloride-induced hepatic failure rabbits ($6.77{\pm}1.76$hr). This results could be due to inhibition of paclitaxel metabolism in liver disorder rabbits since paclitaxel is essentially metabolized in liver. The findings suggest that the dosage regimen of paclitaxel should be adjusted when the drug would be administered in patients with liver disorder in a clinical situation.

• Journal of Environmental Science International
• /
• v.10 no.4
• /
• pp.287-292
• /
• 2001

A packed bed of volcanic rock was used as deodorizing material to remove hydrogen sulfide($H_2$S) from air in a laboratory-scale column, and was inoculated with Thiobacillus sp. as $H_2S$ oxidizer. The effects of volcanic rock particle size distribution on system pressure drop were examined. Various tests have been conducted to evaluate the effect of $H_2S$ inlet concentration and CBCT(Empty Bed Contact Time) on $H_2S$ elimination. The pressure drop for particles of size range from 5.6 to 10 mm was 14 mm$H_2S$/m at a representative gas velocity of 0.25m/s. Biofilter using scoria and Thiobacillus sp. could get the stable removal efficiencies more than 99.9% under $H_2S$ inlet concentrations in the range from 30 to 1,100ppm at a constant gas flow rate of $15.2{\ell}$/min. $H_2S$ removal efficiencies greater than 99% were observed as long as EBCT was longer than 8sec at the 250ppm of $H_2S$ inlet concentration. When EBCT was reduced to 5.5 sec, $H_2S$ removal efficiency decreased by about 12 percent. The maximum $H_2S$ elimination capacity was determined to be 269g-$H_2S/m^3{\cdot}hr$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1193-1201
• /
• 2004

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations fur typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). It was also shown that phase-resolved averaged temperature oscillated in phase with pressure cycle, while normalized standard deviations which represent temporal turbulent intensity of temperature showed nearly constant value around 0.1. The characteristics on the occurrence of high temperature also displayed periodic wave form which was very similar to the pressure signal. And the amplitude of this profile went larger as the fuel/air mixing quality became poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.123-130
• /
• 2020

Nano seed incorporated in micro-sized 4BS (Tetrabasic lead Sulfate) seed was applied to the positive electrode active material and compared with Nano 4BS seed (NS). The dispersion of NS decreased due to the aggregation phenomenon, while the nano seed incorporated in micro-sized 4BS seed (INS) could confirm excellent dispersion. As the content of INS increased, the particle size of the active material became small and constant, which was confirmed through SEM and particle size analysis. The specific surface area for the reaction was increased and the high-rate discharge and lifetime characteristics were improved. In order to confirm the variation in particle size distribution in the plate manufacturing process, internal resistance and voltage were measured for 200 AGM lead-acid batteries, and it was confirmed that batteries quality variation decreased.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.127-134
• /
• 2004

Rammed Aggregate Pier (RAP) has extensive applicability as for a foundation of structures. In this study, bearing capacity of the reinforced ground by RAP and the failure behavior of RAP are investigated through experiments. RAPs with diameters of 45, 60, 70 mm were installed in sand, of which relative densities are 60, 70, 90%. Then, two columns of pressure gauges, near the RAPs and one diameter off from the center of piers, are installed 5, 10, 15, 20, 25, 30 cm from the surface of the ground. The test results show that maximum lateral earth pressure is observed near 5∼10 cm (1.0∼2.0D) from the surface, which indicates the occurrence of bulging failure type. In addition, deformation of RAP in radial direction increases with lower relative density of the ground. Furthermore, lateral stress distribution decreases with depth.