• 전기학회논문지
• /
• 제56권12호
• /
• pp.2059-2064
• /
• 2007

This paper analyzed distribution network reliability related with the increment of outages and duration time according to distribution facilities increasing. KEPCO introduced distribution automation system in 1998 which could recognize outage section by remotely monitoring the fault current and reduce the blackout area by remotely controlling distribution switches. As the result of this outage time reduction using distribution automation system, the minimum distribution automation rate was fined out in this paper on the base of analyzing diverse data and how many switches were used in distribution system to improve distribution network reliability at the situation of distribution facilities increasing. This result can be used as the model that an overseas utility company applies distribution automation system in the future.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.69-76
• /
• 2002

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial and the radial temperature distribution in internal spare of a tube. From the study, fellowing conclusive remarks 7an be made. First, As the number of nozzles increase, separation point move into the hot exit. Second, When we use guide vane type nozzle, the axial temperature distribution constant over the 0.75 of air mass flow rate radio. Third, When we use Spiral type nozzle, axial and radial temperature distribution in the inner space is higher than another nozzle. Fourth, Axial and radial temperature distribution in the inner space vortex-tube is determined by separation point. And separation point is moved by changing of air mass flow rate ratio. At last, A heating apparatus is possible far vortex-tube to use.

• 한국환경과학회지
• /
• 제26권10호
• /
• pp.1111-1124
• /
• 2017

This study aimed to understand the distribution of vegetation in the eastern and western sides of the Baekdudaegan (ridge) dividing the Odaesan National Park, as influenced by its topography and climate. The actual vegetation, topography and climate for each side were used in the overlay analysis. The results of the analysis of actual vegetation showed a high distribution rate of Quercus mongolica forest on both the eastern and western sides. On the eastern side, the distribution rate of Pinus densiflora forest and P. densiflora-Q. variabilis forest was high, while the western side had a high distribution rate of deciduous broad-leaved tree forest and Abies hollophylla forest. A clear trend was identified for vegetation distribution with respect to elevation but not with respect to slope or aspect. The results of micro-landform analysis showed that the P. densiflora forests in the ridge and slope and the deciduous broad-leaved tree forest in the valley were respectively distributed with a high ratio. In terms of climate, the eastern side revealed an oceanic climate, with a relatively high average annual temperature, while the western side was characterized by relatively high average annual humidity and average annual precipitation. The distribution rate of P. densiflora forest was found to be high on the eastern side of the mountain range.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2391-2397
• /
• 1993

The distribution of fatigue crack growth rate is influenced by the measuring interval and methods of calculation of crack growth rate. The purpose of this paper is to suggest a method for the evaluation of crack growth rate distribution without the influence. The constant ${\Delta}P$ test and the constant .DELTA.K test are executed by using the CT specimen. The measuring interval of (${\Delta}a$/W=0.0067~0.014) crack length is not affected by methods of the calculation of the fatigue crack growth rate is suggested.

• Journal of the Korean Data and Information Science Society
• /
• 제20권5호
• /
• pp.955-960
• /
• 2009

As we shall dene an exponentiated complementary power function distribution, we shall consider moments, hazard rate, and inference for parameter in the distribution. And we shall consider an inference of the reliability and distributions for the quotient and the ratio in two independent exponentiated complementary power function random variables.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.141-146
• /
• 1999

An experimental investigation on the leakage characteristics of a labyrinth seal, high-low seal, is studied. Pressure distribution and leakage flow rate are measured along with the shaft speed and the pressure difference between the entrance and the exit. Pressure distribution vanes almost linearly along the seal and the leakage flow rate increases as the increase of the pressure difference. Furthermore, it is found that both the shaft speed and the shaft vibration have no influence on the leakage of the labyrinth seal.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2396-2402
• /
• 2015

공기압축기는 공장 및 설비 가동에 사용되는 필수 장비로써 미국 산업용 전기의 약 30%를 소비하고 있으며, 소비전력 절감을 위해 고급화된 기술 방안들이 제시되고 있다. 압축공기 변화량의 진폭변동이 작을 경우 시스템 안정성이 증가하며, 소비전력을 절감시켜 효율적인 에너지 시스템 설계를 가능하게 한다. 일반적으로 통계적 분석에서는 데이터의 분포를 정규분포, 로그정규분포, 감마분포 등을 이용하여 나타내지만, 압축공기 변화량을 나타내는 데이터처럼 긴 꼬리를 가지는 경우, 한 가지의 분포를 적용하는 것은 적합하지 않을 수 있다. 이에 따라, 본 논문에서는 압축공기의 변화량과 관련된 데이터를 두 개의 영역으로 나눈 혼합분포함수를 적용하여 평균전력 절감 가능성을 제시하였다. 이는 압축공기 변화량이 충분히 큰 수를 초과하는 영역에서는 가우시안 분포보다는 일반 파레토 분포가 더 정확한 퀀타일 값을 추정하는 데에 적합하기 때문이다.

• 유통과학연구
• /
• 제17권3호
• /
• pp.21-30
• /
• 2019

Purpose - While many related prior studies have focused on the segregation by race and ethnicity, the academic interest in the separation of residence by income and social class is gradually increasing. This study aims to not only investigate spatial pattern of economic segregation and poverty rate in South Korea, but also shed light on what affect residential distribution of the poor. Research design, data, and methodology - The unit of analysis is Si-Gun-Gu municipal level entities of South Korea. Most demographic, socioeconomic, and residential variables were derived from Korean Census Data in 2015. In order to examine spatial patterns of economic segregation and poverty rate in South Korea, a series of measurements and visualization was conducted through the Geo-Segregation Analyzer and ArcGIS programs. Determinants of economic segregation and local poverty rates were investigated by regression analyses using STATA. Results - The spatial patterns of areas with high poverty rates were extremely clustered, while the distribution of areas with high economic segregation was relatively evenly distributed. Demographic, residential, and local factors appeared to affect whether the poor live in particular area or spread evenly. Conclusions - The factors that raise the poverty rate result in lower level of economic segregation, while factors that reduce the poverty rate lead to severe level of economic segregation.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.102-110
• /
• 2012

The objective of this study is to improve the performance of a hybrid ground source heat pump (HGSHP) by optimizing the flow distribution ratio of secondary fluid flow rate between a ground loop and a supplemental loop. Initially, a conventional ground source heat pump (GSHP) was tested to determine an optimum flow rate of the secondary fluid. Based on the selected optimum value, the HGSHP was also tested by varying the flow distribution ratio of the secondary fluid flow rate between the ground loop and the supplemental loop, such as 9:1, 7:3, 5:5, and 3:7. The results showed that the optimum flow distribution ratio of the secondary fluid flow rate was 7:3. The COP of the HGSHP was improved by 19% over the GSHP at a flow distribution ratio of 7:3 and an entering water temperature of $40^{\circ}C$.

• Journal of the Korean Data and Information Science Society
• /
• 제28권2호
• /
• pp.443-449
• /
• 2017

Estimation of population proportion like the distribution rate of LED TV and the prevalence of a disease are often estimated based on survey sample data. Population proportion is generally considered as a special form of population mean. In complex sampling like stratified multistage sampling with unequal probability sampling, the denominator of mean may be random variable and it is estimated like ratio estimator. In this research, we examined the estimation of distribution rate based on stratified multistage sampling, and determined some numerical outcomes using stratified random sample data with about 25% of missing observations. In the data used for this research, the survey weight was determined by deterministic way. So, the weights are not random variable, and the population distribution rate and its variance estimator can be estimated like population mean estimation. When the weights are not random variable, if one estimates the variance of proportion estimator using ratio method, then the variances may be inflated. Therefore, in estimating variance for population proportion, we need to examine the structure of data and survey design before making any decision for estimation methods.