• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.13-18
• /
• 2017

Water glass is much cheaper than silicon alkoxide, so it has advantage for commercialization. A condensation by acid catalyst makes considerable effect about the properties of water glass based silica aerogel among many factors in silica aerogel process. The pore structural properties of water glass based silica aerogel such as specific surface area and pore size distribution have been investigated through the changes in the amount and the kinds of acid catalyst. It has been confirmed that water glass based silica aerogel is affected by various conditions of catalyst in the condensation reaction such as the kind, concentration, and the amount of mole of acid catalyst on the properties of final products. Especially, it is checked that the effect of mole of acid is more prominent than that of concentration. In the case for conventional method with introducing 4M HCl in condensation step, the silica aerogel could be synthesized which has $394m^2/g$ of specific surface area, 2.20 cc/g of pore volume, 22.3 nm of average pore size, and 92.53% of porosity. On the other hand, when 4M sulfuric acid was used with 73 mmol at the condensation step of water glass based silica aerogel, the pore structural characteristics of water based silica aerogel showed better properties than the case of using HCl, for example, specific surface area was measured as $516m^2/g$, and pore volume, average pore diameter, and porosity were obtained as 3.10 cc/g, 24.1 nm, and 96.1%, respectively.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.317-334
• /
• 2008

Port industry has achieved a remarkable growth with a help from increase in container shipment and above all, transshipment that reflects international competitive power of Port industry amounts to 36% of the national harbor shipment. Therefore, this study speculates the impact of Port industry on national economy using the inter-industry relation table. As it considers the reason why international competitive power in Port facilities decreased as absence of investment, it is to present an effective investment plan for Port industry. Though Port industry as one of main national key industries play an important role in production of national economy, it has been evaluated as having relatively less importance. And when Port industry is managed independently, relying on foreign countries without improvement, price increase due to improper agreement of foreign enterprises and problems relating to securing safe transportational vehicles will have tremendous impact on national economy. And they should try to create added-value and support re-export of the exported and imported shipment through their processing and packaging by making Port zones bonded area. production of national economy, it has been evaluated as having relatively less importance. And when Port industry is managed independently, relying on foreign countries without improvement, price increase due to improper agreement of foreign enterprises and problems relating to securing safe transportational vehicles will have tremendous impact on national economy. And they should try to create added-value and support re-export of the exported and imported shipment through their processing and packaging by making Port zones bonded area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.104-109
• /
• 2017

The flooding and deterioration of water quality caused by urbanization and climate change are becoming more serious. In order to respond to this, studies on low impact development (LID) technology, which is designed to restore the hydrological system of the urban basin to its natural state, have been actively pursued all over the world, The announcement of the low carbon green growth law, hydrophilic area special law, etc., highlights the importance of technology such as the LID method. However, whereas various developments have been made in relation to the current LID element technology, there has been little research designed to verify its effectiveness. In this study, we analyzed the optimum spatial distribution of pitcher fire pitcher packing in parking lots using the K - LIDM model to verify the effectiveness of the low impact development (LID) method in the early stages. Using the eight package scenario and the three rain intensity scenarios, it was found that the lower 40% pitcher packaging results in an approximately 90% spill reduction effect, as in the case of the whole pitcher's package. The confirmation of these analyses and experimental verification is expected to ensure that the actual pitcher packaging will be used as a basis for arranging LID facilities such as urban planning and housing development in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.725-732
• /
• 2012

This study was carried out to investigate the effects of hydrated potato starch on the quality of low-fat ttoekgalbi (Korean traditional patty) packaged in modified atmosphere conditions during storage. The ttoekgalbi was prepared from 53.2% lean beef, 13.9% lean pork, 9.3% pork fat, and 23.6% other ingredients. Two low-fat ttoekgalbi treatments were prepared by substituting pork fat with hydrated potato starch; either by 50% fat replacement (50% FR) or 100% fat replacement (100% FR). Both 50% and 100% FR increased the moisture, crude protein, and decreased fat content, cooking loss, and hardness. For MAP studies, 200 g of ttoekgalbi were placed on the tray and filled with gas composed of 70% $O_2$: 30% $CO_2$ (70% $O_2$-MAP) and 30% $CO_2$: 70% $N_2$ (70% $N_2$-MAP), and were stored at $5^{\circ}C$ for 12 d. During the storage time, both 50% and 100% FR showed higher protein deterioration, while no differences were found in CIE $a^*$, CIE $L^*$, lipid oxidation, and bacterial counts in comparison to control. The ttoekgalbi with 70% $O_2$-MAP was more red, lighter in color, and showed higher TBARS values compared with 70% $N_2$-MAP. The meat with 70% $N_2$-MAP showed lower aerobic bacterial counts in control than those with 70% $O_2$-MAP. The lower anaerobic bacterial counts were observed only in 50% FR and 100% FR packed with 70% $N_2$-MAP in comparison with 70% $O_2$-MAP. In conclusion, the fat replacement with hydrated potato starch showed no negative effects on the quality of low fat ttoekgalbi during storage and 70% $N_2$-MAP was better than 70% $O_2$-MAP for low-fat ttoekgalbi packaging.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.33-39
• /
• 2015

$BaTiO_3$ is typical ferromagnetic materials with dielectric constant of above 200. $BaTiO_3$ nanoparticles applications are available for multiple purposes such as nanocapacitors, ferroelectric random access memories, and so on. Applications are is diverse from the dispersion of nanoparticles depending on the route of synthesis. In this study, $BaTiO_3$ nanoparticles were synthesized by two different methods such as oxalate method and sol-gel process (ambient condition sol method). Particle size and dispersion condition were studied according to the preparation method and capping agent. Poly vinyl pyrrolidone (PVP) was used as a capping agent in oxalate method and tetrabutylammonium hydroxide (TBAH) used as a capping agent in sol-gel process each. Cubic crystal structure of $BaTiO_3$ phase could be confirmed by X-ray diffraction analysis. Fourier transform-infrared spectroscopy was employed for the confirmation of the capping agent and $BaTiO_3$ nanoparticles. The particle size and distribution analysis was also performed by particles size analyzer and scanning electron microscope.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.243-251
• /
• 2005

The distribution of temperature of flip chipped device with peripheral solder bump array was measured with variables, such as the locations and geometries of heater, the size of device, the size of passivation opening. The highest temperature was measured with the larger device, $3.0(mm)\times3.0(mm)$, which has the smallest heater at the center of device and the circular passivation opening. For 2 (watts) power input, the device shows the highest temperature of about $110(^{\circ}C)$. In contrast, the smaller device, $1.5(mm)\times1.8(mm)$, shows that of $90(^{\circ}C)$. In addition to the size effect, the increase of passivation opening size decreased the maximum temperature by about $10(^{\circ}C)$. From the measurement, the temperature of device could be controlled with the size and geometry of heater, the size of device and the size and geometry of passivation opening.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.167-174
• /
• 2005

Smaller size and higher integration of electronic components make smaller gap between metal conducting layers in electronic package. Under harsh environmental conditions (high temperature/humidity), electronic component respond to applied voltages by electrochemically ionization of metal and metal filament formation, which lead to short failure and this phenomenon is termed electrochemical migration(ECM). In this work, printed circuit board(PCB) is used for determination of ECM characteristics. Copper leads of PCB are soldered by eutectic solder alloys. Insulation breakdown time is measured at $85^{\circ}C,\;85{\%}RH$. CAF is the main mechanism of ECM at PCB. Pb is more susceptible to CAF rather than Sn, which corresponds well to the corrosion resistance of solder materials in aqueous environment. Polarization tests in chloride or chloride-free solutions fur pure metal and eutectic solder alloys are performed to understand ECM characteristics. Lifetime results show well defined log-normal distribution which resulted in biased voltage factor(n=2) by voltage scaling. Details on migration mechanism and lifetime statistics will be presented and discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.33-37
• /
• 2019

In this study, the graded thermal properties of composites are obtained by difference in specific gravity of fillers including Cu, h-BN and GO powders in epoxy. Relatively heavy powders such as Cu and h-BN compared to GO mostly at the bottom layer, while light GO powders were dispersed in the top layer in the composites. The thermal conductivity of composites was gradually increased from 0.55 (0.52) W/mK to 2.82 (1.37) W/mK for GO/h-BN (GO/Cu) epoxy composites from surface to bottom. On the contrary, the coefficient of thermal expansion was decreased from 51 ppm/℃ to 23 ppm/℃ and from 57 ppm/℃ to 32 ppm/℃ for GO/Cu and GO/h-BN, respectively. The variation of thermal properties in composites is attributed due to intrinsic material properties of filler including thermal conductivity, morphology and the distribution by the specific weight of fillers. This simple strategy for realizing graded thermal composites by introducing different filler materials would be effective heat transfer at interface of heterostructure with large thermal properties such as inorganic semiconductor/plastic, metal/plastic, and semiconductor/metal.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2009

By Laser Through-Silicon-Via process, debris and particles occur when you are forming. Therefore the research of TSV cleaning become important to remove those particles and debris. Both chemical cleaning method that uses a surfactant and physical cleaning method that uses a brush were studied with the via of $30{\mu}m$ diameter and $100{\mu}m$ depth on the 8 inch CMOS Image Sensor wafer. On the DI water and a surfactant in mixture ratio of 2:1, debris show $73{\mu}m^2$ per $0.054mm^2$. Cleaning is superior by lower mixture ratio of DI water and surfactant. In addition, It is less than 5% of debris distribution in the laser condition changed by Laser's frequency and its speed and cleaning had no effect. In the physical cleaning, there are no crack and damage when the system condition is set by $1000{\sim}3000rpm$ strip, $50{\sim}3000rpm$ rinsing, and $200{\sim}300rpm$ brushing Therefore, debris and particles can be removed by enforced chemical method and physical method.

• Journal of Mushroom
• /
• v.22 no.3
• /
• pp.122-127
• /
• 2024

This study was conducted to evaluate the market potential of 'Hwanggeumsantari', a new oyster mushroom variety developed in Gyeonggi Province in 2019, and to derive effective market entry strategies. To objectively assess the marketability of 'Hwanggeumsantari' from various perspectives, a panel of 50 consumers was formed, and surveys and interviews were conducted. Additionally, two Focus Group Interviews were held with distributors in the agri-food sector. The results showed that potential consumers were positive about the color and texture of 'Hwanggeumsantari', but expressed relatively less satisfaction with its shelf life and aroma. Distributors, through tow Focus Group Interviews, evaluated that the product had sufficient market competitiveness, but called for efforts to improve cultivation techniques and enhance price competitiveness. Based on the results of market evaluations by consumers and distributors, a SWOT analysis was conducted. The main strengths identified were its outstanding color and texture, while the main weakness was its freshness issue. Meanwhile, the growing demand for healthy foods and various online sales channels could provide market entry opportunities for 'Hwanggeumsantari', but high sensitivity to price in the case of premium pricing could pose a threat. Consequently, a market entry strategy for 'Hwanggeumsantari' was proposed using a 4P mix approach based on the SWOT analysis results. The product strategy emphasized premium positioning, small packaging, and the development of packaging technology to maintain freshness. The price strategy proposed premium pricing and the operation of incentive programs. The distribution strategy suggested channel diversification, direct stores, or direct sales, while the promotion strategy emphasized storytelling and collaboration with influencers.