• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.101-102
• /
• 2003

선형점탄성에서 완화시간분포를 알면 완화탄성율, 동적 점탄성율 등 다양한 정보를 알 수 있기 때문에 중요한 정보이지만 실험으로 직접 측정되는 물리량이 아니며 완화탄성율이나 동적 점탄성율의 실험 결과로부터 얻는 것도 많은 수학적인 어려움이 있다. 최근에 Regularization을 이용한 방법으로 연속함수로써 완화시간분포를 계산하는 방법들이 개발되어진 바 있다. 동적점탄성율 실험결과로부터 완화시간분포를 연속함수로써 계산할 수 있는 간단한 수치해법을 연구하였다. (중략)

• 유변학
• /
• 제8권2호
• /
• pp.103-118
• /
• 1996

변형된 Maxwell 모델을 모의 데이터와 폴리스티렌의 동적 실험 데이터인 G＇과 G ＂에 적용하여 연속 완화시간 스펙트럼을 결정하였고, Maxwell 모델을 사용했을 때 얻어지 는 불연속 완화시간 스펙트럼과 비교하였다. MGMM과 GMM 모두 선형회귀 방법과 비선 형회귀 방법을 사용하여 완화시간 스펙트럼을 결정하였는데 비선형 방법을 사용했을 때 선 형방법에 비해 좀 더 만족스러운 결과를 얻을수 있었다. 모의 데이터의 경우 사용한 완화시 간의 수가 많은 경우에는 MGMM과 GMM 모두 원래의 스펙트럼을 잘 재현했으나 완화시 간의 수가 작은 경우에는 MGMM이 GMM에 비해 원래의 완화시간 스펙트럼을 보다 잘 나 타내었다. 또 단분산성폴리스티렌의 경우 MGMM과 GMM의 완화시간 스펙트럼이 모두 작 은 완화시간 영역에서는 분자량에 무관했고 큰 완화시간 영역에서는 분자량이 커질수록 스 펙트럼이 완화시간이 커지는 쪽으로 이동하였다. 또 두드러진 terminal 완화시간을 볼수 있 었다. 그러나 다분산성 폴리스티렌의 경우에는 단분산성의 경우와는 달리 두드러진 terminal 완화시간을 볼수 없었다. 그리고 MGMM의 파라미터 m은 분자량 분포에 크게 의존함을 알 수 있었으며 연속 완화시간 스펙트럼에서 계산된 불연속 완화시간 스펙트럼이 GMM에서 얻어진 불연속 완화시간 스펙트럼과 잘 일치함을 볼수 있었다.

• Journal of Magnetics
• /
• 제5권3호
• /
• pp.81-84
• /
• 2000

A magneto-optical microscope magnetometer (MOMM) has been developed to simultaneously measure 2-dimensional array hysteresis loops of each local area of $320\times320-nm^2$ spots on ferromagnetic films, in addition to grabbing time-resolved domain evolution patterns. Using the system, spatial distribution of local coercivity can be quantitatively generated and then, compared directly with domain patterns grabbed at precisely the same position of a sample. It is clearly demonstrated that local coercivity distribution governs domain reversal behavior via a thermally activated relaxation process.

• Management Science and Financial Engineering
• /
• 제17권2호
• /
• pp.1-21
• /
• 2011

This paper considers an integrated inventory-distribution system with a fleet of heterogeneous vehicles employed where a single warehouse distributes a single type of products to many spatially distributed retailers to satisfy their dynamic demands. The problem is to determine order planning at the warehouse, and also vehicle schedules and delivery quantities for the retailers with the objective of minimizing the sum of ordering cost at the warehouse, inventory holding cost at both the warehouse and retailers, and transportation cost. For the problem, we give a Mixed Integer Programming formulation and develop a Lagrangean heuristic procedure for computing lower and upper bounds on the optimal solution value. The Lagrangean dual problem of finding the best Lagrangrean lower bound is solved by subgradient optimization. Computational experiments on randomly generated test problems showed that the suggested algorithm gives relatively good solutions in a reasonable amount of computation time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.98-99
• /
• 2021

The number of fires in the Korean distribution warehouse increased by about 350 from 1,070 in 2014 to 1,416 in 2020. In addition, the fire load increases with the scale of the distribution warehouse, and even if the automatic sprinkler operates, there is a limit to the direct intrusion of the water source into the ignition source, and the detector is often installed on a high ceiling. The sensing time is often delayed. In order to improve the fire safety of such distribution warehouses, the US NFPA stipulates in detail the contents related to the facility, such as sprinkler water discharge standards, rack-type warehouse installation height restrictions, and regulations on collection and equipment. However, in Japan, the goods loaded inside the distribution warehouse are not classified in detail, and it is considered that the fire safety for the distribution warehouse is low due to the relaxation regulations of the fire prevention section. Therefore, in this study, common problems are classified into material, spatial, and safety management characteristics through the cases of distribution warehouse fires that occurred in Korea and abroad, and the problems related to distribution warehouses in Korea and abroad are compared and analyzed. And present basic materials for improving the life safety standards of future distribution warehouse facilities.

• Korea-Australia Rheology Journal
• /
• 제13권4호
• /
• pp.205-217
• /
• 2001

This review article summarizes results of recent viscoelastic and dielectric studies for entangled cis-polyisoprene (PI) chains. The PI chains have the so-called type-A dipoles parallel along the chain backbone, and their slow viscoelastic and dielectric relaxation processes reflect the same global chain motion. However, this motion is differently averaged in the viscoelastic and dielectric properties, the former representing the isochronal orientational anisotropy of individual entanglement segments while the latter detecting the orientational correlation of the segments at two separate times (0 and t). On the basis of this difference, the viscoelastic and dielectric data of the entangled PI chains were compared to elucidate detailed features of the chain dynamics. Specifically, the molecular picture of dynamic tube dilation (DTD) incorporated in recent models was tested for linear and star PI chain. The comparison revealed that the DTD picture was valid for linear PI chains but failed for the star PI chains in the dominant part of the terminal relaxation. The failure for the star chains was related to the pre-requisite for the DTD process, rapid equilibration of successive entanglement segments through their constraint release (CR) motion: For the star chains, the dilated tube diameter expected in the terminal regime was considerably large because of a broad distribution of motional modes of the chains, so that the CR-equilibration required for DTD could not occur in time. The terminal relaxation of the star chain appeared to occur through the CR process before the expected DTD process was completed. The situation was different for the linear chain exhibiting narrowly distributed motional modes. The dilated tube expected for the linear chain was rather thin and the required CR-equilibration occurred in time, resulting in the success of the DTD picture. These detailed features of the chain dynamics was revealed only when the viscoelastic and dielectric properties were compared, demonstrating the importance of this comparison.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.909-924
• /
• 2015

This paper investigates the vibration phenomenon of a nanobeam subjected to a time-dependent heat flux. Material properties of the nanobeam are assumed to be graded in the thickness direction according to a novel exponential distribution law in terms of the volume fractions of the metal and ceramic constituents. The upper surface of the functionally graded (FG) nanobeam is pure ceramic whereas the lower surface is pure metal. A nonlocal generalized thermoelasticity theory with dual-phase-lag (DPL) model is used to solve this problem. The theories of coupled thermoelasticity, generalized thermoelasticity with one relaxation time, and without energy dissipation can extracted as limited and special cases of the present model. An analytical technique based on Laplace transform is used to calculate the variation of deflection and temperature. The inverse of Laplace transforms are computed numerically using Fourier expansion techniques. The effects of the phase-lags (PLs), nonlocal parameter and the angular frequency of oscillation of the heat flux on the lateral vibration, the temperature, and the axial displacement of the nanobeam are studied.

• 전기의세계
• /
• 제14권3호
• /
• pp.10-17
• /
• 1965

This paper presents a method of the voltage-reactive power control in the long and short range operations and introduces a conception, "optimum control pattern." The optimum control pattern, aiming at the over-all system control, is defined as the optimum voltage distribution which minimizes the system operating cost under the conditions that the specified power be supplied and the system voltage be kept within the specified bounds. The following procedure was adopted to obtain this optimum pattern. In the first place, a power system was divided into three blocks, namely, load, substation and generator. Lagrange's, multiplier method is applied to each block in turn, paying attention only at the operating voltage distribution. Phase angles at each bus are then modified so that the continuity of active power is maintained. This procedure may be called "block relaxation method with Lagrange's multipliers." In a long range operation, this control pattern determines the optimum installation capacity of reactive power sources. In a short range operation, it also gives the reference state of real time control and the optimum switching capacity of reactive power souces. The real time control problem is also studied from the standpoint of cooperation of control devices such as generators, shunt capacitors, shunt reactors and ratio load controllers. A proposal for the real time control will contribute to the automation of power system operation in the near future. in the near future.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.187-199
• /
• 1994

In order to find an effect of structural changes due to variation of addition ratio of anhydride hardener and postcuring herat-treatments upon electrical properties of epoxy composites, the dielectric properties over a frequency range from 30[Hz] to l[MHz] were investigated in the temperature range of 20-180[.deg. C]. From the dielectric properties, the a peaks related with glass-transition phenomena of epoxy network appeared near 130[.deg. C], the conduction loss in high temperature region above 150[.deg. C] due to thermal dissociation of hardener started off with the low frequency side and the .betha. peak concerned with contribution of movable unreacted terminal epoxy groups and curing agents in the glass states concurred with the high-frequency side below 20[.deg. C]. And an effect of an hydride hardener upon structural changes and of postcuring heat treatments upon structural stability in epoxy composites would be explained through the estimation of the distribution of relaxation times and the activation energy for a .alpha. peak according to the WLF equations.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권1호
• /
• pp.32-41
• /
• 1994

In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.