• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.649-653
• /
• 2005

A mono-disperse Ni powders for multilayer ceramic capacitors were prepared in a large scale by solution reduction method using $NiSO_{4}$ $N_{2}$$H_{4}$and NaOH. The exothermic reactions such as Ni-complex formation between highly concentrated $NiSO_{4}$ and $N_{2}$$H_{4}$ and the reduction of $Ni^{2+}$ into Ni provided thermal energy sufficient for spontaneous solution-reduction reaction. Because well-defined Ni particles could be prepared without external heating, the present method was named as 'auto-thermal method'. The formation of Ni­complex, the precipitation of $Ni(OH)_{2}$ gel triggered by NaOH addition, and its reduction into Ni by dissolution-recrystallization route were the reaction mechanism. The preparation of mono-disperse and spherical Ni powder was attributed to uniform distribution of reducing agent $N_{2}$$H_{2}$ within $Ni(OH)_{2}$ gel due to the decomposition of$NiSO_{4}$-$N_{2}$ $H_{4}$ complex.

• 센서학회지
• /
• 제10권2호
• /
• pp.118-124
• /
• 2001

입자들이 용액에 녹아있을 때 pH에 따라서 다른 zeta-potential을 가지게 되며, 이것은 입자의 분산상태에 영향을 주게 된다. NO 센서에서 $WO_3$ 입자의 크기는 감도에 큰 영향을 끼치므로 Sol-Coprecipitation법에 의한 $WO_3$ 센서 제조 시에 $WO_3$ precursor 상태에서의 pH의 영향을 알아보았다. 먼저 $WO_3$ precursor의 전기적 포텐셜을 측정하여 pH가 2에서 7로 변함에 따라 mobility가 증가하여 7일 때에 가장 큰 분산도를 가진 것을 알 수 있었고, 이는 powder 제조 후 입도 분석, 감지막의 XRD peak, 표면사진으로부터 확인 할 수 있었다. 결과적으로 감도 특성에도 영향을 끼쳐 pH=7에서 제조한 센서가 다른 pH에서 제조한 센서보다 감도가 우수한 것으로 나타났다.

• 공업화학
• /
• 제18권6호
• /
• pp.552-556
• /
• 2007

연구에서는 $TiO_2$ 담체에 귀금속(Pd, Ru, Ir)을 담지시켜 촉매를 제조하였다. 금속분산의 향상을 위해 $H_2O-H_2$ 전처리 기술이 이용되었고, 반응물로서 xylene, toluene 그리고 MEK를 사용하였다. 단일금속과 합금금속의 촉매들은 함침법에 의해 준비하였고, XRD, XPS 분석을 통하여 특성 분석하였다. Pd-Ru, Pd-Ir 촉매는 다양한 활성점을 나타내었고, 그것은 Pd의 metal 영역를 강화시켰다. 합금금속으로 이루어진 촉매가 단일 금속으로 이루어진 촉매에 비해 VOCs 전환율이 더 높았다. $H_2O-H_2$ 전처리 기술은 Pd 입자를 고르게 분산시켰다. 이는 촉매의 효율을 증진시키는 효과를 보여주었다. 본 연구에서 Pd에 소량의 Ru, Ir 첨가는 VOCs의 산화반응을 증진시켰고, $TiO_2$ 담체상에서 $H_2O-H_2$ 전처리는 VOCs의 제거효율을 증진시켰다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.561-566
• /
• 2008

The reciprocating compressor is widely used in the industry field, because it has simple principle and high efficiency. In this work, in order to improve design of discharge passage line in hydrogen compression system Numerical analysis was conducted. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including velocity, pressure and turbulence kinetic energy distribution of hydrogen gas going out from the cylinder to discharge-path line are presented in this paper. Discharge-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows velocity, pressure and turbulent kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement might be done.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.59-66
• /
• 2020

Herein, we investigated the thermal conductivity and thermal stability of natural rubber composite systems containing hybrid fillers of boron nitride (BN) and aluminum nitride (AlN). In the hybrid system, the bimodal distribution of polygonal AlN and planar BN particles provided excellent filler-packing efficiency and desired energy path for phonon transfer, resulting in high thermal conductivity of 1.29 W/mK, which could not be achieved by single filler composites. Further, polyethylene glycol (PEG) was compounded with a commonly used naphthenic oil, which substantially increased thermal conductivity to 3.51 W/mK with an excellent thermal stability due to facilitated energy transfer across the filler-filler interface. The resulting PEG-incorporated hybrid composite showed a high thermal degradation temperature (T₂) of 290℃, a low coefficient of thermal expansion of 26.4 ppm/℃, and a low thermal distortion parameter of 7.53 m/K, which is well over the naphthenic oil compound. Finally, using the Fourier's law of conduction, we suggested a modeling methodology to evaluate the cooling performance in thermal management system.

• 한국지리정보학회지
• /
• 제14권2호
• /
• pp.109-127
• /
• 2011

대기 에어러솔은 대기중에 존재하는 미세입자로 인체 유해성을 지니고 있으며 기후변화에 있어서도 중요한 역할을 하는 변수로 알려져 있다. 게다가 대기 에어러솔의 주요 성분에 대한 정확한 평가는 환경에 미치는 영향에 있어서도 매우 중요하다. 이 때문에 지구관측 위성자료는 대기질 감시측면에서도 효과적인 수단으로 이용되고 있다. 따라서 본 연구에서는 인공위성 관측 자료를 이용하여 전구적인 규모의 대기 에어러솔의 주요 성분별 분포변화를 알아보고자 MODIS 에어러솔 광학두께(AOT; Aerosol Optical Thickness)와 미세입자분율(FMF; Fine Mode Fraction), 그리고 TOMS 자외선 흡수성 에어러솔 지수(AAI; UV Absorbing Aerosol Index)를 이용하여 네 가지의 주요 에어러솔의 성분(먼지, 탄소성, 황산화물, 해염)을 구분할 수 있는 방법을 제시하였다. 여기서 얻어진 결과물을 검증하기 위하여 에어러솔 예측 모델자료와 각 격자별 자료로 선형회귀분석을 수행한 결과, 본 연구에서 산출된 결과물이 에어러솔의 성분별 전반적인 패턴을 잘 표현하는 것을 확인 할 수 있었다. 이렇게 주요 에어러솔 타입으로 구분된 위성자료의 사용은 대기질 감시뿐만 아니라 기후변화연구에 있어서도 도움을 줄 것으로 사료된다.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.386-390
• /
• 2015

Fe-base superalloy powders with $Y_2O_3$ dispersion were prepared by high energy ball milling, followed by spark plasma sintering for consolidation. High-purity elemental powders with different Fe powder sizes of 24 and 50 mm were used for the preparation of $Fe-20Cr-4.5Al-0.5Ti-O.5Y_2O_3$ powder mixtures (wt%). The milling process of the powders was carried out in a horizontal rotary ball mill using a stainless steel vial and balls. The milling times of 1 to 5 h by constant operation (350 rpm, ball-to-powder ratio of 30:1 in weight) or cycle operation (1300 rpm for 4 min and 900 rpm for 1 min, 15:1) were applied. Microstructural observation revealed that the crystalline size of Fe decreased with an increase in milling time by cyclic operation and was about 15 nm after 3 h, forming a FeCr alloy phase. The cyclic operation had an advantage over constant milling in that a smaller-agglomerated structure was obtained. The milled powders were sintered at $1100^{\circ}C$ for 30 min in vacuum. With an increase in milling time, the sintered specimen showed a more homogeneous microstructure. In addition, a homogenous distribution of Y-compound particles in the grain boundary was confirmed by EDX analysis.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.99-109
• /
• 2022

Powder flowability is critical in additive manufacturing processes, especially for laser powder bed fusion. Many powder features, such as powder size distribution, particle shape, surface roughness, and chemical composition, simultaneously affect the flow properties of a powder; however, the individual effect of each factor on powder flowability has not been comprehensively evaluated. In this study, the impact of particle shape (sphericity) on the rheological properties of Ti-6Al-4V powder is quantified using an FT4 powder rheometer. Dynamic image analysis is conducted on plasma-atomized (PA) and gas-atomized (GA) powders to evaluate their particle sphericity. PA and GA powders exhibit negligible differences in compressibility and permeability tests, but GA powder shows more cohesive behavior, especially in a dynamic state, because lower particle sphericity facilitates interaction between particles during the powder flow. These results provide guidelines for the manufacturing of advanced metal powders with excellent powder flowability for laser powder bed fusion.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.109-115
• /
• 2012

2단계 유화중합에 의한 단분산의 블루칼라 착색 poly(styrene-co-acrylic acid) 라텍스를 성공적으로 제조하였다. 0.21 ${\mu}m$의 polystyrene 시드를 이용하여 중합 2단계에서 Blue 606 염료와 acrylic acid의 중합으로 carboxyl 음이온을 갖는 블루칼라 라텍스를 합성하였다. 본 연구에서 제조한 블루칼라 라텍스는 모두 1.01 이하의 우수한 단분산도를 가지며 0.25~0.42 ${\mu}m$ 범위의 입자경을 나타내었다. 중합 2단계에서 acrylic acid 부가시간이 늘어남에 따라 입자경은 증가하였고 30 min 이상으로 늘어남에 따라 콜로이드 안정성을 갖는 블루칼라 라텍스가 제조되었다. 20 wt% AA 농도에서 -145 mV의 제타전위와 $-9.4{\times}10^{-6}\;cm^2/Vs$의 전기영동이동도를 나타내었다. 25 wt% DVB 농도하에서 396.7 K의 높은 유리전이온도를 나타내었다.

• 한국환경과학회지
• /
• 제23권2호
• /
• pp.275-289
• /
• 2014

Asian dust (or yellow sand) occurring mainly in spring in East Asia is affected by the distribution of weather systems. This study was performed to investigate the characteristics of suspended particulate for Asian dust at Busan, Korea in 20 March 2010, which was one of the extreme case for the last 10 years. There was used the data of weather chart, satellite, automatic weather system (AWS), $PM_{10}$, laser particle counter (LPC), and backward trajectories model. In synoptically, the high pressure was located in the northwestern part and low pressure was located in the northeastern part of Korea. The strong westerly winds from surface to upper layer makes it possible to move air masses rapidly. Air masses passing through Gobi Desert in Mongolia and Inner Mongolia plateau covered the entire Korean peninsula. As the results of aerosol analysis, $PM_{10}$ concentration at Gudeok mountain in Busan was recorded $2,344{\mu}g/m^3$ in 2300 LST 20 March 2010 and their concentration was markedly increased at coarse mode particle. In surface condition, westerly wind about 3 ~ 5 m/s was dominant and small particles of $0.3{\sim}0.5{\mu}m$ were distributed on the whole. In heavy metal components analysis, the elements from the land was predominated.