• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1116-1124
• /
• 2005

The influence of fiber content of hay (low-fiber 47% NDF and high-fiber 62% NDF of DM) and concentrate level (high 50% and low 20% of ration DM) on chewing activity, passage rate and nutrient digestibility were tested on four restrict-fed (11.1 to 13.7 kg DM/d) Holstein cows in late lactation. Aspects of ruminal fermentation and digesta particle size distribution were also investigated on two ruminally cannulated (100 mm i.d.) cows of the same group of animals. All digestion parameters studied were more affected by the fiber content of the hay and its ratio to non structural carbohydrates than by the concentrate level. Giving a diet of high-fiber (62% NDF) hay and low concentrate level (20%) increased chewing activity but decreased solid passage rate and total digestibility of nutrients due to a limited availability of fermentable OM in the late cut fiber rich hay. A supplementation of high-fiber hay with 50% concentrate in the diet seems to improve the ruminal digestion of cell contents, whilst a depression of the ruminal fiber digestibility was not completely avoided. Giving a diet of low-fiber (47% NDF) hay and high concentrate level (50%) reduced markedly the chewing and rumination activity, affected negatively the rumen conditions and, consequently, the ruminal digestion of fiber. A reduction of the concentrate level from 50 to 20% in the diet of low-fiber hay improved the rumen conditions as reflected by an increase of the ruminal solid passage rate and of fiber digestibility and in a decrease of the concentration of large particles and of the mean particle size of the rumen digesta and of the faeces. Generally, it can be summarised that, (i) concentrate supplementation is not a strategy to overcome limitations of low quality (fiber-rich) hay, and (ii) increase of the roughage quality is an effective strategy in ruminant nutrition, especially when concentrate availability for ruminants is limited.

• 대한화학회지
• /
• 제55권1호
• /
• pp.92-97
• /
• 2011

비닐 아세트산염 합성에 대한 1족 알칼리금속 아세트산염의 촉진 효과를 조사하였다. Pd-Au/$SiO_2$ 촉매를 사용한 경우와 사용하지 않은 경우에 대해 에틸렌과 아세트산 간의 기체상 반응에 대해 생성물 선택성과 에틸렌 전환을 비교하였다. 촉진제가 촉매 표면을 안정화시켰으며, 생성물 선택성과 에틸렌 전환을 촉진하였다. 이 촉매 효과는 1족에서 위에서 아래로 내려갈수록 증가하였다. 이것은 아세트산염의 공통이온효과 때문이다.

• Journal of Photoscience
• /
• 제1권1호
• /
• pp.31-37
• /
• 1994

Photoirradiation at > 300 nm onto a suspension of platinized TiO$_2$ (TiO$_2$-Pt) particles in an aqueous solution. of N$_{\varepsilon}$-carbamyI-L-lysine (Lys(CONH)$_2$) induced the selective N-cyclization of Lys(CONH$_2$) into almost optically pure L-pipecolinic acid (PCA) under argon atmosphere at ambient temperature. Among various TiO$_2$-Pt catalysts, a P-25 (Degussa) powder platinized via impregnation from chloroplatinic acid followed by hydrogen reduction at 753 K exhibited the highest photocatalytic activity for Lys(CONH$_2$) consumption and L-PCA production. GC-MS analyses of L-PCA obtained photocatalytically from $^{15}$N$\alpha$-Lys(CONH$_2$) revealed the selective formation $^{15}$N-substituted L-PCA. This implies that the mechanism for L-PCA production contains selective cleavage of C$_{\varepsilon}$-N bond and intramolecular alkylation at $\alpha$-amino group. Effect of pH on the rate of this photocatalytic reaction was investigated in detail and compared with the pH-dependent charge distribution in Lys(CONH$_2$) molecule. It is clarified that protonation-deprotonation of $\alpha$-amino group gives marked influence on the rate and selectivity of the photocatalytic reaction. On the basis of these results, it is concluded that the selective production of optically pure L-PCA, especially in an acidic suspension of TiO$_2$-Pt, was attributed to the enhanced protonation of $\alpha$-amino group to prevent undesirable oxidation by photogenerated positive holes and blocking of $\varepsilon$-amino group to yield racemic Schiff base intermediate.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.432-435
• /
• 2002

We have developed and proposed the heavy ion CT system which consists of fluorescent screen and CCD camera equipped with image intensifier. In our system, we have measured the residual range of particles that passed a phantom and reconstructed the CT image for the distribution of relative stopping power by filtered back projection method with Shepp '||'&'||' Logan filter. The heavy ion $\^$12/C accelerated up to 400 MeV/u by HIMAC (Heavy Ion Medical Accelerator in Chiba) was used. Intensity of the beam output changes like macro pulse, the period being 3.3 sec and the width being 2 sec. The series of data was acquired in synchronizing with the pulse, leading to the improvement of S/N in the CT image. The fundamental performance was experimentally evaluated in the proposed system. The spatial resolution was estimated to be about 1 mm and the density resolution (electron density referred to water) to be about 0.01.

• 대한치과기공학회지
• /
• 제40권1호
• /
• pp.17-25
• /
• 2018

Purpose: When casting of ceramics, proper amount of deflocculant was added for disperse the particles in slip. In this study, examined the optimum amount of APMA(ammonium polymethaacrylate) water as deflocculant for casting the zirconia. Methods: The 100 g of zirconia powder were ball milled with 300 g zirconia ball, 90 g of distilled water, and APMA water in polyethylene pot for 24 hours. The amount of APMA water were added as deflocculant from 0.5 to 0.9 g at an intervals of 0.1 g. The viscosity of slip with no deflocculant showed 1362c.p. and the minimum viscosity with 580c.p. obtained when the slip contained 0.7% of deflocculant. Bar type specimens were casted with plaster mold and biscuit fired at $1100^{\circ}C$ for 1 hours. Biscuit fired specimens were finished with $60mm(L){\times}14mm(W){\times}10mm(H) bar$. Finished specimens were 2nd fired at $1500^{\circ}C$ for 1 hour. Results: Regardless the addition of deflocculant, all 2nd fired specimens showed 0% of apparent porosity and water absorption. The specimens with no deflocculant showed 24% of drying shrinkage and 27.4% firing shrinkage. On the other hand, The specimens with deflocculant showed 17.4% of drying shrinkage and 17.6% firing shrinkage regardless the amount of deflocculant. The maximum bulk density with $6.09g/cm^3$ obtained when the specimens casted with 0.7~0.9% of deflocculant contained slips. Bend strength of specimen with no deflocculant showed 680 MPa and the maximum bend strength with 814 MPa obtained when the specimen casted with 0.7% of diflocculant contained slip. Conclusion : It was found that the particle shape of the powder according to the dispersing agent is added, the particle size, sintering temperature and affect the particle size distribution, sintering time, sintering atmosphere, such a great influence on the sintering.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권2호
• /
• pp.97-100
• /
• 1998

Systemic lupus erythematosus is a severe cutaneous-systemic disorder of unknown etiology, It is represented with erythematous patches on the face in a so-called butterfly distribution, and characteristically classified as an autoimmune disease with antinuclear antibodies. The autoimmune diseases such as systemic lupus erythematosus, $Sj{\ddot{o}}gren$ syndrome, rheumatoid arthritis have been associated with lymphoid malignancy - leukemia, malignant lymphoma - which could involve various organs(spleen, liver, brain, mediastinal lymph node, supraclavicular lymph node, inguinal lymph node, cervical lymph node etc.). Many authors have studied about the association of systemic lupus erythematosus and malignant lymphoma, but exact etiology is still unknown. A common viral etioloty for systemic lupus erythematosus has been suggested since virus-like particles have been found in the glomerular endothelium of patients with systemic lupus erythematosus. These oncogenic viruses may be responsible for the higher frequency of malignant lymphoma in patients with systemic lupus erythematosus. In the other theory, the causes of malignant lymphoma are the defect of immune system due to systemic lupus erythematosus and the long-term use of therapeutics for treatment of systemic lupus erythematosus. When the cellular immune system(delayed hypersensitivity) is impaired by immunosuppressive drugs, it is likely that the body is no longer able to recognize and reject malignant cells as they arise; they continue to grow and divide unhindered. The impairment of the cellular immune system may allow growth of oncogenic virus or the survival of neoplatic tissues. 47-year old female patient treated systemic lupus erythematosus with steroid and immunosuppressive drugs for 5 years visited to our hospital due to elevated mass on left upper anterior maxilla area. By performing biopsy, we diagnosed this lesion as malignant lymphoma and referred to oncologist for chemotherapy. So we report a case of malignant lymphoma due to systemic lupus erythematosus with review of literatures.

• 환경영향평가
• /
• 제21권1호
• /
• pp.81-91
• /
• 2012

In this study, it is grasped the status of nutrients through an investigation of release characteristics and physicochemical properties of sediments on reservoir. And then the effect of sediments is evaluated on the water quality in reservoir. In the results of physicochemical analysis, the pollution level of midstream is the highest, which shows the traits that the water is more deeper and takes place a deposition consistently. Then, the pollution level of upstream is higher than downstream's because inflow has influence on the upstream directly. The downstream is located near tidal gate so that the soil particles can be moved easily and are difficult to be deposited due to the distribution of seawater by control of tidal gate. Therefore, the downstream is showed the lowest pollution level than the others. Also, the concentration of SOD(Sediment Oxygen Demand) in the upstream which is influenced on the effect of inflow is highest than the others. When it analyzes under anaerobic and aerobic condition to understand the release characteristic of sediment, it shows that the release rate is low or negative under the aerobic condition. Whereas the release rate is usually positive under the unaerobic condition relatively. According to these results, it is necessary to maintain the proper environmental factors of water body for decreasing the release rate of sediment. Because the release rate is changeable under the different condition of water body. Therefore, proper strategies are required for increasing the self-purification of water as well as keeping the aerobic condition of sediment and managing a sediment layer directly to control the inner-pollution by the sediment of reservoir.

• 천문학회보
• /
• 제43권1호
• /
• pp.51.3-52
• /
• 2018

Since Voyager 1 passed the Heliopause in 2012, it has provided the observations of the charged particles in the local interstellar medium. However, Voyager 1 only provides the information along with its trajectory. In order to understand the global view of the interstellar plasma flow surrounding the Heliopause, we need another tool. When the interstellar plasmas approach the Heliopause, the ions are deflected around the Heliopause due to the draping of the interstellar magnetic field. The draping of the interstellar magnetic field is strongly connected with the shape of the Heliopause. A fraction of the diverted ions exchanges their charges with the undisturbed primary interstellar neutral atoms, and then the ions become neutral atoms called the secondary interstellar neutral atoms. The newly created neutral atoms carry information on the diverted flow of the interstellar ions, and a fraction of them can travel to the Sun. Therefore, the secondary component of the interstellar neutrals is an excellent diagnostic tool to provide important information to constrain the shape of the Heliopause. The secondary interstellar neutrals are observed by Interstellar Boundary Explorer (IBEX) at Earth's orbit. Since 2009, two energetic neutral atom cameras on IBEX have measured neutral atoms and it has provided sky maps of neutral atoms. In this presentation, we will discuss the directional distribution of the secondary interstellar neutrals at Earth's orbit. In the sky maps, the primary interstellar neutral gas is seen between $200^{\circ}$ and $260^{\circ}$ in ecliptic longitude and the secondary components are seen in the longitude range of $160^{\circ}-200^{\circ}$. We also present a simplified model of the outer heliosheath to help interpret the observations of interstellar neutrals by the IBEX-Lo instruments. We extract information on the large-scale shape of the Heliopause by comparing the neutral flux measured at IBEX along four different look directions with simple models of deflected plasma flow around hypothetical obstacles of different aspect ratios to the flow. Our comparisons between the model results and the observations indicate that the Heliopause is very blunt in the vicinity of the Heliospheric nose, especially compared to a Rankine half-body or cometary shape.

• 공업화학
• /
• 제19권4호
• /
• pp.370-375
• /
• 2008

비수계 분산(NAD : non-aqueous dispersion) 중합을 이용하여 친환경적인 아크릴 수지를 합성시 최적의 중합조건에 대해 연구하였다. 중합된 고분자 입자들 간의 응집을 방지하기 위한 안정제의 적정량은 20 wt%로 나타났고 안정된 NAD 상태를 유지하기 위한 혼합 용매의 적정 혼합비는 지방족과 방향족 용매의 비율이 80 : 20인 것으로 나타났다. NAD 수지의 점도는 반응시간뿐만 아니라 개시제의 양 및 교반 속도 등에 의해 영향을 받는 것으로 나타났다. 또한 NAD 수지의 입자 크기 및 분포도, 안정제의 양, 개시제의 농도 등에 의해 영향을 받는 것을 확인하였다. 단량체의 투입시기는 단량체를 초기에 모두 투입하면 용매의 극성이 증가하여 입자의 크기가 커져서 입자의 안정성이 저하되므로 단계별로 지속적으로 투입할 필요가 있는 것으로 관찰되었다.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.180-185
• /
• 2013

The iron oxides nanoparticles and iron oxide with other compounds are of importance in fields including biomedicine, clinical and bio-sensing applications, corrosion resistance, and magnetic properties of materials, catalyst, and geochemical processes etc. In this work we describe the preparation and investigation of the properties of coated magnetic nanoparticles consisting of the iron oxide core and organic modification of the residue. These fine iron oxide nanoparticles were prepared in air environment by the co-precipitation method using of $Fe^{2+}$: $Fe^{3+}$ where chemical precipitation was achieved by adding ammonia aqueous solution with vigorous stirring. During the synthesis of nanoparticles with a narrow size distribution, the techniques of separation and powdering of nanoparticles into rather monodisperse fractions are observed. This is done using controlled precipitation of particles from surfactant stabilized solutions in the form organic components. It is desirable to maintain the particle size within pH range, temperature, solution ratio wherein the particle growth is held at a minimum. The iron oxide nanoparticles can be well dispersed in an aqueous solution were prepared by the mentioned co-precipitation method. Besides the iron oxide nanowires were prepared by using similar method. These iron oxide nanoparticles and nanowires have controlled average size and the obtained products were investigated by X-ray diffraction, FESEM and other methods.