• International Journal of Quality Innovation
• /
• 제10권1호
• /
• pp.25-36
• /
• 2009

The purpose of this study is to analyze the efficiency of the service quality activity itself by using the DEA Model, in contrast to previous quality evaluation methods, as an attempt to evaluate the service quality activities of the distribution industry. Furthermore, by complementing the shortfalls of the weighted value of the DEA Model, it recommends a DEA/PS Model that is appropriate in the evaluation of service quality activities. Based on this model, the study proposes the SQAE Model, an evaluation tool to complement the traditional measuring method. According to the results of the analysis of 18 sample distribution businesses, there was a discrepancy by business in the results of the Traditional Scoring System and the Evaluation Measuring System. Therefore, it is most desirable to not only be active in service quality activities but also increase efficiency at the same time.

• 한국산업융합학회 논문집
• /
• 제16권2호
• /
• pp.29-33
• /
• 2013

This study has been conducted to propose an optimal design guidance of underfloor air distribution system by examining air pattern and proper exhaust status of floor plenum using CFD (Computational Fluid Dynamics). Simulation shows deficient air pattern and exhaust status at BPG (Bypass Grille) of the current design. As a means to find an alternative design, four cases have been developed and tested. Case 1, 2 and 3 show similar results in comparison to the current design. However, case 4 shows improved air pattern and exhaust status at BPG(Bypass Grille), and has been chosen as the optimal alternative.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.72-76
• /
• 2011

Antimicrobial activities of the Acidic Liquid originated from Carbonized Rice Hull(ALCRH) and the paper treated with ALCRH were investigated to apply ALCRH to functional paper products as a natural antimicrobial agent. ALCRH showed antimicrobial activity for bacteria and yeast, with higher performance for bacteria than for yeast. Antimicrobial activity was not developed on paper coated with ALCRH by bar coater probably due to the evaporation of antimicrobial compounds of ALCRH from the paper surface with time. Saturation of paper with ALCRH was essential to develop antimicrobial activity on the paper. Dipping paper in ALCRH solution was recommended as one of the effective ways to make antimicrobial paper.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.26-43
• /
• 2000

It is well accepted that gloss variation deteriorates the print quality and there are various objective ways to measure this. Several studies now have shown that the coefficient of variation in the octave band passed printed gloss image has an excellent correlation with ratings by an expert panel using a magnitude estimation scaling method. The correlation improves when the gloss level is also taken into account beyond that of the COV. There is also evidence that the correlation would improve even more if the gloss spatial distribution could be better accounted for. We show that much (at least 80% and perhaps up to 90%) of the gloss distribution can be accounted for by the paper topography over a wide range of dimensions (scale). Recent work has supported the role that microroughness and multiple surface scattering play in the gloss distribution. This offers the promise of showing that even a greater amount of gloss variationcan be explained by topography.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.479-484
• /
• 2006

The pore structures of paper were modified by the application of the blending of pulp, refining, and filler particle size and ash content. It was conformed that the reflectivity of paper can be modified by the combination of above parameters. It was also found that the modifications of reflectivity of paper were very close relation with pore structure, such as average pore size, pore size distribution and porosity. The average pore size was decreased with addition of HwBKP, but showed smaller particle size than those made from 100% HwBKP. Refining of pulp decreased both average pore size and the reflectivity of paper. The pore size distribution of filled paper can be varied by the combination of filler particle size and ash content.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.659-667
• /
• 2021

This paper develops the theory for a novel fault-tolerant, permanent magnet biased, 4-active-pole, double plane, homopolar magnetic bearing. The Lagrange Multiplier optimization with equality constraints is utilized to calculate the optimal distribution matrices for the failed bearing. If any of the 4 coils fail, the remaining three coil currents change via a novel distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. Magnetic flux coupling in the magnetic bearing core and the optimal current distribution helps to produce the same c-core fluxes as those of unfailed bearing even if one coil suddenly fails. Thus the magnetic forces and the load capacity of the bearing remain invariant throughout the failure event. It is shown that the control fluxes to each active pole planes are successfully isolated. A numerical example is provided to illustrate the new theory.

• 한국자원식물학회지
• /
• 제37권2호
• /
• pp.130-136
• /
• 2024

Archidium Brid. (Archidiaceae) 속은 극지방을 제외한 아열대에서 온대 지역까지 35종이 분포하는 것으로 알려진 속으로 국내 분포는 명확하지 않았으나 경기도 연천군 감악산에 Archidium ohioense Schimp ex Müll. Hal.이 자생하고 있음을 확인되었다. 본 연구에서는 A. ohioense의 형태학적 기재와 동정을 위한 주요 형질의 사진, 도해 및 검색표를 제시하였다.

• 방송공학회논문지
• /
• 제12권5호
• /
• pp.445-451
• /
• 2007

본 연구는 디지털영화의 활성화를 통해 한국 영화산업의 콘텐츠 부족 현상, 불안정한 수익 구조, 부가시장 축소라는 구조적 문제를 해결하고, 더 나아가 한국 영화산업의 성장 동력으로 삼고자 하는 취지에서 시작하였다. 디지털영화 제작 활성화에서는 디지털 기술을 활용한 저예산예술영화의 저변확대를 통해 영화콘텐츠의 다양성에 기여하고, 디지털기술을 매개로 방송과 연계한 콘텐츠 공동제작을 통해 디지털영화의 제작 활성화 및 영화산업의 성장을 기대해본다. 그리고 디지털영화 유통 활성화에서는 온라인상의 디지털영화 유통에 영화산업계의 보다 적극적인 시장 참여와 DMB나 IP-TV와 같은 신규매체가 영화산업의 부가시장이 될 수 있도록 적절한 홀드백 구축하는 등의 적극적인 노력이 요구된다. 이러한 디지털영화의 문제점들을 해결하기 위한 노력을 통해 우리는 문화기술 강국으로 도약할 수 있는 발판을 마련할 수 있을 것이다.

• 유통과학연구
• /
• 제13권2호
• /
• pp.5-13
• /
• 2015

Purpose - In recent years, concerns over privatization have been growing in some public sectors. Privatization in Britain offers lessons for those who have intended to privatize their industry, and in particular, the port industry. Therefore, it is useful for researchers to examine British port privatization in detail, particularly the implications of UK port privatization. Research design, data, and methodology - After reviewing the historical development of the UK port industry, the important factors determining the success of the British port privatization process were identified. The interpretations could be lessons for some other country to consider port privatization in near future. Results - The key factors in relation to port privatization are first, regulation; second, ownership; and third, utilities and operations, which includes autonomy, efficiency, and competitiveness. In addition, the UK port management system is a pure private port system, which has been successful. Conclusions - In Britain, after deciding to privatize the erstwhile public ports, they were fully privatized, focusing on the aforesaid key factors. This offers important lessons for the privatization of other ports in the world.