• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.352-354
• /
• 2002

The sag is phenomenon that magnitude of load voltage temporarily decreases because of power system fault. If a certain equipment in industrial process have any trouble result from sag. it can cause utility to be charged for enormous economics loss. Therefore it need to analyze the characteristic of sag and then mitigation method for sags in distribution system in odor to increase reliability. This paper gives an overview of sags characteristic due to short circuit fault in distribution system and after a general discussion of the various forms mitigation, gives a sags mitigation method with concentrating on changing the distribution system like spot network, on-site generation.

• Journal of Biomedical Engineering Research
• /
• v.21 no.2
• /
• pp.213-218
• /
• 2000

Pressure distributions of the soft tissue are valuable for understanding and diagnosing the disease characteristics due to the mechanical loading. Our system measures dynamic pressure distributions in real-time under the general PC environment, and analyzes various foot disorders. Main features of the developed system are as follows: (1) With the resistive pressure sensor matrix of 40${\times}$40 cells, the data is sent to the PC with the maximum sampling rate of 40 frames/sec. (2) For each frame, contact area, pressure and force are analyzed by graphic forms. Thus, various biomechanical parameters are easily determined at specific areas of interests. (3) A certain stance phase can be chosen for the analysis from the continuous walking, and the detailed biomechanical analysis can be done according to an arbitrary line dividing anterior/posterior or medial/lateral plantar areas. (4) The center of pressure (COP) is calculated and traced from the pressure distribution data, and thus the movement of the COP is monitored in detail. A few experiments revealed that our system successfully measured the dynamic plantar distribution during normal walking.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.647-651
• /
• 2001

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric filed is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, from the analysis of weibull distribution, it was confirmed that to low allowed breakdown probability under 0,.1%, the applied field value needed to be under 21.5MV/cm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5545-5550
• /
• 2014

Background: Human biological materials from cancer patients are linked directly with public health issues in medical science research as foundational resources so securing "human biological material" is truly important in bio-industry. However, because South Korea's national R and D project lacks a proper managing system for establishing a national standard for the outputs of certain processes, high-value added human biological material produced by the national R and D project could be lost or neglected. As a result, it is necessary to develop a managing process, which can be started by establishing operating guidelines to handle the output of human biological materials. Materials and Methods: The current law and regulations related to submitting research outcome resources was reviewed, and the process of data 'acquisition' and data 'distribution' from the point of view of big data and health 2.0 was examined in order to arrive at a method for switching paradigms to better utilize human biological materials. Results: For the deposit of biological research resources, the original process was modified and a standard process with relative forms was developed. With deposit forms, research information, researchers, and deposit type are submitted. The checklist's 26 items are provided for publishing. This is a checklist of items that should be addressed in deposit reports. Lastly, XML-based deposit procedure forms were designed and developed to collect data in a structured form, to help researchers distribute their data in an electronic way. Conclusions: Through guidelines included with the plan for profit sharing between depositor and user it is possible to manage the material effectively and safely, so high-quality human biological material can be supplied and utilized by researchers from universities, industry and institutes. Furthermore, this will improve national competitiveness by leading to development in the national bio-science industry.

• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.166-173
• /
• 2008

Chemical forms and release potential of heavy metals were studied in the lime treated sediment of lake Chungcho. Chemical forms of heavy metals were analyzed using a sequential extraction method, and release potential of heavy metals was evaluated by the ratio of the content of labile forms to total metal one. Dominant form of Cd, Cu, Pb, and Zn in the untreated sediments was organic/sulfidic form that is stable in the reducing environment such as the bottom of Lake Chungcho. With liming of the sediment, the chemical forms of studied metals were greatly changed from organic/sulfidic form to adsorbed and reducible form, especially Cd and Cu to adsorbed and reducible form, but Pb and Zn to reducible form. It is believed that increase of unstable form of heavy metals in the sediments by liming was caused by the increase of pH of the pore water at the expense of organic/sulfidic form. Thus, we concluded that the liming approach currently used in the treatment of dredged sediments might cause the increase of labile form which is easily dissolved, and may increase the release of metals from the sediment into overlying water.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.41-46
• /
• 2014

Purpose - This study focused on providing strategic findings that make significant sense for companies that are looking for a future outsourcing strategy. The study analyzes the results of outsourcing in the information logistics systems field and verifies the results through experimental study of the performance delivered by logistics outsourcing types. Research design, data, and methodology - The study sample was assembled based on a random sampling method used to extract the initial 451 companies from a list of Korean distributors, wholesalers, and retailers. Following that sample process, 423 companies were confirmed by verifying their e-mail address and contacts (telephone and fax numbers), and were selected as initial research subjects. We reduced that number to 331 companies for the survey sample through telephone interviews in advance with the 423 companies that were targeted, in order to verify whether they are in the field of outsourcing of information logistics systems. The period of the survey extended from November 10, 2013 to January 10, 2014. The number of collected surveys totaled 181. We reviewed the contents of the survey responses, and reduced the number of research subjects to 175. In this study, we used a standard analysis to investigate whether there is a difference in distribution results based on different types of outsourcing information in the logistics system field and, through T-verification, we investigated whether the difference between distribution results in each group resulting from that standard analysis is statistically significant. Results - These results show that there is a difference in distribution outcome, based upon type of distribution outsourcing. In addition, we determined that they are meaningful results by confirming that, for usability and to improve the capabilities of a third-party logistics service supplier, both the choice of reasonable outsourcing types and the enhancement of various types of alliances are very important success factors. Taken together these study results, with a goal of enhancing the distribution capabilities of a Korean distributor, can be implemented to enhance management results achievable by supplying an information logistics system in the form of strategic outsourcing rather than in the form of simple outsourcing. In addition, the outcomes of logistics distributors in Korea that are using outsourcing in the logistics information systems field show high performance results in commercial endeavors in the following order: competitive, pre-competitive, non-competitive, and pro-competitive. Conclusions - This study focused on providing strategic findings. However, in the case of outsourcing in the field of information logistics systems of Korean distributors, there has been a focus on simple outsourcing rather than on strategic outsourcing; furthermore, there has been a concentration on non-competitive forms instead of pro-competitive forms, which could achieve better distribution results. This discussion is presented in more detail in the analysis results of this study.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.321-329
• /
• 2012

In this study, statistical analysis under both stationary and non-stationary climate was conducted for rainfall data measured in Seoul. Generalised Extreme Value (GEV) distribution and Gumbel distribution were used for the analysis. Rainfall changes under the non-stationary climate were estimated by applying time variable (t) to location parameter (${\xi}$). Rainfall depths calculated in non-stationary climate increased by 1.1 to 6.2mm and 1.0 to 4.6mm for the GEV distribution and gumbel distribution respectively from those stationary forms. Changes in annual maximum rainfall were estimated with rate of change in the location parameter (${\xi}1{\cdot}t$), and temporal changes of return period were predicted. This was also available for re-evaluating the current sewer design return period. Design criteria of sewer system was newly suggested considering life expectance of the system as well as temporal changes in the return period.

• Journal of Distribution Science
• /
• v.21 no.10
• /
• pp.51-61
• /
• 2023

Purpose: Research focuses on private universities' professional education in a competitive educational environment. Due to increased competition in the higher education industry, private universities are under pressure to improve their marketing strategies and better understand their prospective students. This study intends to investigate how information sources are used and modified by Indonesian university students when making decisions. Research design, data and methodology: This research is a case study in Riau province, which includes active university students registered in the government database. Data was collected using a questionnaire distributed via Google Forms to students at a private university, and 164 students completed the questionnaire. Results: The results show that the influence of technical quality, functional quality, and image cannot affect word of mouth, and technical quality cannot affect consumer attitudes. The results show that the distribution of high service quality and high image will encourage people to share their experiences by word of mouth to build evaluation attachment in college selection. and found that a good campus image has no direct impact on word of mouth. The spread of an excellent campus image only attracts students to evaluate it. The more talk about the distribution of service quality, the higher the decision to choose the service.

• Structural Engineering and Mechanics
• /
• v.42 no.2
• /
• pp.191-210
• /
• 2012

The Force Density Method (FDM) is a well known and extremely versatile tool in form finding of cable nets. In its linear formulation such method makes it possible to find all the possible equilibrium configurations of a net of cables having a certain given connectivity and given boundary conditions on the nodes. Each singular configuration corresponds to an assumed force density distribution. Its improvement as Non-Linear Force Density Method (NLFDM) introduces the possibility of imposing assigned relative distances among the nodes, the tensile level in the elements and/or their initial undeformed length. In this paper an Extended Force Density Method (EFDM) is proposed, which makes it possible to set conditions in terms of given fixed nodal reactions or, in other words, to fix the positions of a certain number of nodes and, at the same time, to impose the intensity of the reaction force. Through such extension, the (EFDM) enables us to deal with form findings problems of cable nets subjected to given constraints and, in particular, with mixed structures, made of cables and struts. The efficiency and the robustness of method are assessed through comparisons with other form finding techniques in dealing with characteristic applications to the prestress design of cable systems. As a further extension, the EFDM is applied to structures having some parts not yet geometrically defined, as can happen in designing new creative forms.

• Korean Institute of Interior Design Journal
• /
• no.31
• /
• pp.56-63
• /
• 2002

This study intends to prepare a system that can be used, by applying digital technique, in analyzing complexity of architectural forms that have been visualized by the correlation based on the distribution chart made in accordance with profile lines. The profile lines are derived from the edge analysis of the architectural forms, simplified based on the visual theory. For the purpose, this study was conducted in the following ways: First, problems of the existing models for the elevation analysis were examined along with formal analysis based on visual recognition to consider the profile lines derived from the forms. Secondly, in elevation analysis, profile lines were derived by digital method to measure them qualitatively. To verify the objectivity of the measured data value, a survey was conducted based on the adjective cataloging method, and the correlation of the survey result and analyzed data was analyzed to verify the validity of the derived data. Thirdly, supplementation for the problems deducted from experiments and the possibility to use it in designing were suggested. Digital method has many advantages over the conventional analyzing system in deriving precise data value by excluding subjectivity. It also allows various analytical methods in analyzing numerous data repeatedly. Diversified models and methods of analysis considering numerous factors arising in the process of designing remain assignments to research in future.