• MALSORI
• /
• no.60
• /
• pp.67-84
• /
• 2006

The purpose of this study is to find some acoustic parameters on frequency domain to distinguish the Korean nasals, $/m,\;n,\;{\eta}/$ from each other. The new parameters are devised on the basis of LTAS (Long Term Average Spectrum). The maximum peak amplitude and the relevant formant frequency are measured in low and high frequency range, respectively. The frequency of spectral valley and its energy level are also obtained in the specific frequency range of the spectrum. Spectral slope, total energy value in specific frequency range, statistical distribution of spectral energy like centroid, skewness, and kurtosis are suggested as new parameters as well. The parameters that show statistically significant differences across nasals are summerized as follows. 1) in syllable initial positions: the total energy value from 1,500 to 2,200 Hz(zeroENG); 2) in syllable final positions: the peak amplitude of the first formant(peak1_a), the formant frequency with maximum peak amplitude from 4,000 to 8,000 Hz(peak2_f), the maximum peak amplitude of the formant frequency from 4,000 to 8,000 Hz(peak2_a), and the total energy value from 1,500 to 2,200 Hz(zeroENG).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.319-324
• /
• 1996

In this paper, radial sheared eletronic shearopgraphy was studied in order to measure vibration characteristics of circular or radial symmetric objects. We calculated amplitude of vibration by using eletro-optic holography theory, and utilized a porror prism for optical arrangement of sheared two images in this experiment. In this case, the data measured by shearing interferometer give us a distribution of the gradient of vibration amplitude. This developed system is applied to symmetical objects such as fans of airconditioner and circular plates to test vibration characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1372-1383
• /
• 1998

In this paper, modeling for DC and AC characteristics analysis of DFB-LD was performed considering effects of .lambda./4-shifted gratingandspatial hole burning within a laser diode cavity. From the simulation for DC characteristics, Light-Current curve, optical power distribution and carrier density distribution within the cavity can be obtained. The simulation for AC characteristics porovides IM response and the amplitude and phase and the amplitude and phase response of FM with excellent accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.856-862
• /
• 2004

This paper introduces a program by which we can extract the optimal parameters from the statistical model, the amplitude probability distribution(APD), of the electromagnetic noise using genetic algorithm. The genetic algorithm used in this program has the advantages of the reduction of calculation time, the automation of extraction process, and the operation of global optimization.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.3
• /
• pp.144-148
• /
• 2011

Change in damping capacity with strain amplitude was studied in Mg-Al-Si alloy in as-cast, solution-treated and aged states, respectively. The as-cast microstructure of the alloy is characterized by eutectic ${\beta}$($Mg_{17}Al_{12}$) phase and Chinese script type $Mg_2Si$ particles. The solution treatment dissolved the ${\beta}$ phase into the matrix, while the aging treatment resulted in the distribution of continuous and discontinuous type ${\beta}$ precipitates. The solution-treated microstructure showed better damping capacity than as-cast and aged microstructures both in strain-dependent and strain-independent damping regions. The decrease in second-phase particles which weakens the strong pinning points on dislocations and distribution of solute atoms in the matrix, would be responsible for the enhanced damping capacity after solution treatment.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.975-978
• /
• 1997

This Paper presents a high impedance fault (HIF) detection algorithm of distribution systems using wavelet transform. Two HIFs on dry soil and sandy soil were simulated on various load conditions in 22.9 kV distribution systems using EMTP, and the current wavelets were decomposed by wavelet transform. The current root mean square(rms) change, the index change rate and the relative amplitude change were used as the multi-criteria for a HIF detection. The index change rate and the relative amplitude were made using the wavelet coefficients.

• Wind and Structures
• /
• v.2 no.2
• /
• pp.127-131
• /
• 1999

This paper describes probabilistic characteristics of damping in a tall building based on the results of full-scale measurement. It is found, through statistical analysis of the damping data, that the probability density function(PDF) of damping at the high amplitude plateau can be well represented by Normal distribution (Gaussian distribution). A stochastic damping model is proposed to estimate amplitude-dependent damping for practical application.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.68
• /
• pp.1-7
• /
• 2001

A probabilistic model for fatigue life of a structural component is derived when the component is in a variable-amplitude loading environment. The physical mechanism which governs fatigue failure is used to model the fatigue life. Especially, the judgement of rotational symmetry in the-stress-intensity-factors results in the probability distribution for fatigue life. The probability distribution is related to the familiar truncated Gaussian distribution, which has a single parameter with a direct physical meaning.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.66-71
• /
• 2000

In the present study a numerical simulation is performed on a natural convection inside a square cavity with a vibrating bottom wall. The heat transfer coeffcients for various amplitudes of the bottom wall vibration were compared to the case without the bottom wall excitation. From the results, it is seen that the local temperature distribution in a cavity becomes more uniform as the amplitude of the bottom wall vibration is increased. Also, it was seen that the heat transfer coefficient increased on the heating wall as the applied amplitude increased.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.47-52
• /
• 2001

We investigate the variation in the shape of confusion circle as the real amplitude distribution of incident beam in pupil area is shifted and the effect of the shift of incident beam on the astigmatism for eye. The shifted magnitudes of Incident beam are 0.0, 0.25, 0.5 and 0.75 and the shifted direction of incident beam ${\pi}/2$. We also consider the optical system having the astigmatism which are $0.0{\lambda}$, $0.25{\lambda}$, $0.5{\lambda}$ and $0.75{\lambda}$. As the shifted magnitude of the real amplitude distribution of incident beam increases, the shape of confusion circle on the image surface transfers from the rotational symmetry to the asymmetry like ellipse and the length of the major axis for confusion circle on the Image surface increases. We know from results in this paper that the shift of the incident beam in pupil area compensates the effect of astigmatism and the real amplitude distribution of incident beam in pupil area is shifted to minimize the effect of astigmatism for eye.