• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.389-403
• /
• 2019

Large amounts of concrete waste are likely to arise from the decommissioning of a Kori-1 nuclear power plant. Several studies have been conducted on decommissioning concrete waste in recent decades, however, they have been limited to contaminated concrete issues or were small pilot-scale experiments. This study constructed two industrial-scale models of on-site concrete waste management for clean as well as contaminated concrete. To evaluate the performance of both the models, simulations were conducted using the Flexsim software. The concrete particle size distribution of Kori-1 and concrete processor properties based on widely used construction equipment were used as sources of input data for the simulations. It was observed that it may take over two years to complete the on-site concrete management processes owing to the performance of existing processors. In addition, it was demonstrated that it is essential to identify bottlenecks in the system and enhance the performance of the relevant processors to avoid delays of the decommissioning schedule. Our results suggest that this novel approach can contribute to developing schedules or expediting delayed activities in the Kori-1 decommissioning project.

• Korean Journal of Artificial Intelligence
• /
• v.6 no.1
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• The Journal of Asian Finance, Economics and Business
• /
• v.1 no.2
• /
• pp.15-24
• /
• 2014

This research investigates the characteristics, principles, advantages, factors and problems of cluster development in Kazakhstan, and identifies the prerequisites, conditions and stages of organizing clusters on the framework of special economic zones. In this research, we used methods, which will allow analyzing of the organization industrial clusters in special economic zones in Kazakhstan. The author studied international experience of cluster development and the efficiency of the use of the model of the "rhombus effect" with account the specific features of interaction between the participants of the cluster, analysis of the legal framework for the formation and development of clusters. These have been identified as the more important or strategically necessary clusters in Kazakhstan: innovation-technological cluster, innovation-education cluster, innovation-petrochemical cluster, innovative-metallurgical cluster, transport and logistics cluster, textile industry cluster, tourism cluster, agro cluster, construction cluster, medical and pharmaceutical cluster. Firstly, the results suggest that the interaction of science, education, business and government in the development and implementation of innovation policy is not sufficiently structured to provide a balanced representation of the interests of the range of various innovative enterprises in Kazakhstan. Secondly, the legal basis of cluster development in Kazakhstan is determined. Need to develop mechanisms for the implementation of promising direction. Thirdly, the clusters can be formed in the existing special economic zones, allowing them to get right to the mass production of high-tech products that are developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.348-354
• /
• 2007

RFID system is emerging new technology for ubiquitous computing environment. RFID system, however, provides privacy problems while the technology offers incredible rich opportunities for applications in the filed of logistics, distribution, and medical services, etc. Many researches have been conducted in order to solve this problem, but the current RFID authentication protocols are still insufficient for settling the privacy problem in the point of view of privacy intrusion and system efficiency. The purpose of this paper is to present a RFID mutual authentication protocol which improves safety level, compared with current authentication protocols. The proposed authentication protocol can provide mutual authentication services, and is secure against location tracing, spoofing, reflection attack.

• The Korean Journal of Air & Space Law and Policy
• /
• v.18
• /
• pp.105-134
• /
• 2003

This paper describes generic cognitive aspects of the air traffic controller's performance and perceptive activities unveiled through the past literature study. which underlines mental modelling and mental picture presented in the middle of complicated situational awareness and decision making process when air traffic controller comes to determine the distance between aircraft under control to maintain air traffic in a safe, orderly and expeditious way. It also describes human limit in terms of human memory in conjunction with relative workloads and environmental factor. In conclusion, It suggest that ATC authority will take into account the qualitatiive adjustment of training requirement necessary for ATC facility rating and refresher training to allow them more preparedness for better situational awareness and optimal decision making. In this paper controller's behavioral activators affecting their job performance are addressed in perspective of aviation safety.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.799-806
• /
• 2004

Recently, as the forerunner in establishing the Northeast Asia's logistics base, a lot of marine engineering works such as new ports and container terminals, extension of old ports, new bridges, land reclamation etc. have been progressed. Parallel to it, there is also an increasing demand for improving the safety of construction. In this situation, high resolution seismic reflection profiling can be well used, attempting to classify rocks and sediments under water, if possible, to delineate the distribution of grain sizes in sediments not only for calculating the cost of removing sediments from harbour's channels, but also for estimating the bearing capacities for bridge or port construction. However, the results from the corresponding reflection survey that has been in operation in our country can not be effectively used for engineering purposes mostly due to the insufficient resolution. Thus. in this paper, two innovative strategies are introduced to enhance resolution. The one deals with a newly designed exploration barge that will help reduce several kinds of noises encountered electrically or operationally. The other is associated with an establishment of optimum measuring system comprising e.g. a specially devised hydrophone with a combination of 7 piezoelectric elements. Field experiments performed at Busan harbour are illustrated. The quality of acquired data was thereby fundamentally improved in comparison with that obtained at the same time in a conventional way.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.168-179
• /
• 1999

In order to settle down structural causes of the process of distribution and apparel production in domestic fashion industry, and to raise competitive power with changing market environment, we need to bulid up Quick Response(QR) system based on information technology such as EDI(Electronic Data Interchange), KAN(Korea Article Number), and POS(Point of Sales), POS is the most valuable information tool to promote QR system paractically. The purpose of this study was to investigate motivation of POS adoption, problems in operating the system, and satisfaction on POS effects. Data were collected by sending questionnaire to the managers in apparel firms which were using POS. Statistical devices were t-test, frequency with SAS program. The results fo the study were as follows: 1. The degree of satisfaction to POS effects was rather good. Especially, rapid evaluations on new products gave the greatest satisfaction to the users. 2. Satisfaction degree of POS effects according to introduces time and organization characteristic(number of employees) have no significant difference, but the firms which have higher annual sales volume showed higher satisfaction degree. Merchandise department showed higher satisfaction on POS effects. 3. The motivation of POS adoption was an effective logistics control with consumer information as a marketing strategy. The problems in operating the system were lack of investment, and professionals. They almost didn't have KAN code, instead, have their own code system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.99-103
• /
• 2020

The volume of parcel delivery is steadily increasing with the rapid growth of the global online e-commerce market. However, a large amount of packaging materials used for these parcel delivery is finally causing environmental problems as waste. In this study, we have taken a pilot test on the returnable parcel delivery packaging & service, which is one of various ways to reduce the generation of the distribution packaging waste raised by e-commerce-based parcel delivery. For the purpose of this project, we made 300 boxes of returnable & foldable delivery packaging(415 mm × 280 mm × 160 mm) and have cooperated with e-commerce company(CJ ENM) & logistics company(LogisAll). Consequently, about 50% of the delivered packages was returned because of the lack of consumer's understanding on the returnable packaging system. We finally have suggested the policy strategy to get over problems derived from the experiment, like the retrieval rate and cost of the returnable packaging, economic efficiency and so on.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.331-341
• /
• 2011

This paper considers an inbound lot-sizing and outbound dispatching problem for a single product in a thirdparty logistics (3PL) distribution center. Demands are dynamic and finite over the discrete time horizon, and moreover, each demand has a delivery time window which is the time interval with the dates between the earliest and the latest delivery dates All the product amounts must be delivered to the customer in the time window. Ordered products are shipped by multiple vehicle types and the freight cost is proportional to the vehicle-types and the number of vehicles used. First, we formulate a mixed integer programming model. Since it is difficult to solve the model as the size of real problem being very large, we design a conventional genetic algorithm with a local search heuristic (HGA) and an improved genetic algorithm called adaptive genetic algorithm (AGA). AGA spontaneously adjusts crossover and mutation rate depending upon the status of current population. Finally, we conduct some computational experiments to evaluate the performance of AGA with HGA.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.433-444
• /
• 2008

With development of RFID technology, medicine and national defense as well as logistics and distribution industries have tried to adopt RFID system. Small projects as well as large national projects have planned to adopt the new technology. However, a lot of companies that have promoted a RFID-based project have confronted many problems due to a lack of information about demonstration projects and absence of systematic guideline. Therefore, it's urgent to develop a practical and useful guideline for companies that have considered to adopt the RFID system. In this paper, a practical framework to adopt RFID system is suggested by five phases : establishment of project plan, analysis of objectives, selection of equipments, development/installation, and operation/post management phases. Besides, a detail method by each stages is also given. A systematic RFID system adoption procedure has been defined through an analysis on demonstrated projects and interview with an expert and the adoption method by stage has been suggested. The purpose of this paper is to minimize the entry barriers by suggesting a practical RFID adoption procedure.