• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.383.2-383
• /
• 2002

In this paper, an experimental technique using a reference accelerometer has been developed to measure the in-plane vibration intensity of a beam. It has the advantages of shortening measurement time and reducing accelerometer phase error comparing with the cross spectral Intensity measurement technique using an accelerometer array. The distribution of the in-plane vibration Intensity over the beam has been measured. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.693-698
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics f3r intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.14-18
• /
• 2005

It is important to select light sources and luminaires in the process of lighting design. Therefore, development of light sources has been constantly grown for a high efficacy and long life. And, the design of luminaires has been developed for the reflection of light mechanism. But it has been not enough to study for the refraction of light mechanism Therefore, the propose of this study is to study for the refraction of light mechanism. In addition, this study is modeling for the luminous intensity distribution of planar prism to use the results of photometric data that is able to obtain various luminous intensity distribution.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.19-25
• /
• 2007

특정한 배광 구현을 위하여 부피를 갖는 실제 광원에 대한 프리즘 설계법을 연구하였다. 입사각을 알고 목표 방향으로 광선을 보내려 할 때, 프리즘 정각을 구하는 수식을 유도하였고, 순차적으로 프리즘 정각을 구하였다. 점광원으로 가정한 설계 결과의 문제점을 분석한 후 이를 보완하여 부피를 갖는 광원에 적용할 수 있는 설계법을 도출하였다. 각각의 설계 결과로 나온 배광과 효율을 비교, 분석하였고 보완된 설계법을 통해 개선된 결과를 얻을 수 있었다.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1270-1277
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics for intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 춘계학술대회 논문집
• /
• pp.126-129
• /
• 2007

In this paper, an iterative MAP approach using a Bayesian model based on the lognormal distribution for image intensity and a GRF for image texture is proposed for despeckling the SAR images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel type s as states of molecules in a lattice-like physical system defined on a GRF. Because of the MRFGRF equivalence, the assignment of an energy function to the physical system determines its Gibbs measure, which is used to model molecular mteractions. The proposed adaptive iterative method was evaluated using simulation data generated by the Monte Carlo method. In the extensive experiments of this study, the proposed method demonstrated the capability to relax speckle noise and estimate noise-free intensity.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.885-900
• /
• 2015

This paper introduces Romberg-Richardson's method as one of the numerical integration tools for computation of stress intensity factor in a pre-cracked specimen subjected to a complex stress field across the crack faces. Also, the computation of stress intensity factor for various stress fields using existing three methods: average stress over interval method, piecewise linear stress method, piecewise quadratic method are modified by using Richardson extrapolation method. The direct integration method is used as reference for constant and linear stress distribution across the crack faces while Gauss-Chebyshev method is used as reference for nonlinear distribution of stress across the crack faces in order to obtain the stress intensity factor. It is found that modified methods (average stress over intervals-Richardson method, piecewise linear stress-Richardson method, piecewise quadratic-Richardson method) yield more accurate results after a few numbers of iterations than those obtained using these methods in their original form. Romberg-Richardson's method is proven to be more efficient and accurate than Gauss-Chebyshev method for complex stress field.

• 한국통신학회논문지
• /
• 제23권4호
• /
• pp.1006-1015
• /
• 1998

20GHz 이상의 주파수대에서 대기중 감쇠에 있어서 고려해야 할 인자로는 대기분자, 강우, 강설, 안개 등이 있으며 이 중 가장 큰 영향은 강우에 의한 감쇠이다. 강우로 인한 감쇠는 강우강도에 의해서 그 감쇠정도가 결정되고, 강우강도는 공간적 시간적으로 변동이 매우 다양하다. 따라서 강우강도에 의한 시간적 공간적 데이터의 확보와 정확한 강우강도의 추정은 정확하고 신뢰성 있는 회선설계를 위하여 필수적이다. 본 연구에서는 제주도를 제외한 남한전역의 32개 측후소로부터 얻을 수 있는 최근 10여년 간의 디지털 강우강도 데이터를 확보하여 지역별 강우강도와 시간율의 관계를 경험적으로 분석하였으며, 강우강도의 분포를 추정하기 위한 여러 가지 방법론을 비교 분석하였고 한국실정에 맞는 방법론을 제시하였다.

• 한국멀티미디어학회논문지
• /
• 제13권8호
• /
• pp.1115-1127
• /
• 2010

TFT-LCD 생산 과정에서 발생하는 결함을 정확하게 분류하여 결함 유형에 따라 폐기, 사용가능 등의 의사결정을 적절하게 내리는 것은 수율 증가 및 생산성 향상에 필수적인 요소이다. 본 논문에서는 TFT-LCD 생산 라인에서 획득한 결함 영상에 대하여 명암도 분포(intensity distribution) 및 결함 영상의 형태 특징(shape feature)을 분석하여 효과적으로 필름 결함 유형을 분류하는 기법을 제시한다. 본 연구에서는 먼저 필름 결함 영상을 결함 영역과 결함이 아닌 배경 영역으로 이진화하고, 결함 영역에서 결함의 선형성(linearity), 명암도 분포를 고려한 형태 특징 등의 여러 가지 특징을 분석하여 기준 영상(referential image) 데이터베이스를 구축하였으며, 분류하고자 하는 결함 영상과 데이터베이스에 저장된 기준 영상과의 매칭 비용 함수(matching cost function)를 정의하여 적절히 매칭시킴으로써 결함의 유형을 결정하였다. 제시한 기법의 성능을 검증하기 위하여 실제 TFT-LCD 생산 라인에서 획득한 결함 영상들을 대상으로 분류 실험을 수행하였으며, 실험 결과 생산 라인에서 이용할 수 있을 정도의 상당한 수준의 분류 정확도를 달성하였음을 보여주었다.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.34-44
• /
• 1996

In order to examine the accuracy of the intensity method, the fiber orientation-angle distribution of fiber-reinforced polymeric composites is measured using image processing. The fiber orientation function is calculated from the fiber orientation measured by the soft X-ray photograph. Theoretical and experimental results of fiber orientation function are compared for the composites with different fiber contents and fiber orientations. The intensity method is used for the experimental investigation and the measured fiber orientation function is compared to the calculated one. The relations between the measured and the simulated fiber orientation functions $J{\small{M}}$ and $J{\small{S}}$ respectively are identified. For the fiber length of 1.000mm and 2.000mm, it shows that $J{\small{M}}=0.83J{\small{M}}$. However. in general. the value of $J{\small{M}}$ decreases as the fiber length increases. For GFRP composites the relations between $J{\small{M}}$ and theoretical value J show that $J{\small{M}}$=0.73J for short fiber and $J{\small{M}}$=0.81J for long fiber.