• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2010

In this work, effect of various process-control agents (PCAs) on the mechanical alloying of amorphous alloy of $Al_{85}Y_8Ni_5Co_2$ has been investigated. The dependence of the particle shape, size and crystallization behavior of the amorphous alloy powders on the type of PCAs and their concentrations was investigated by using X-ray diffraction, field-emission scanning electron microscopy and differential scanning calorimetry. It was found that the additive of toluene could affect positively the amorphization and thermally induced crystallization processes, as well as the size refinement, morphology and particle-size distribution of as-milled powders in comparison with alloy obtained without PCA.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.785-790
• /
• 1994

The active noise control which regards the acoustic power as a target function to be minimized, is analyzed to test its feasibility of which simplifies the measurement system compared with the global acoustic energy based active noise control system. In fact, it is found that the acoustic power based active noise control strategy is equally likely as good as the global acoustic energy based active noise control method if the acoustic field of interest is diffusive or very low model density one. In the intermediate model density field, we also demonstrate that the power based control gives the similar results as the energy based control in terms of global sound energy reduction for the lightly damped enclosure which might be most important system in practical application. From all the theoretical and power based control strategy is dependent on the characteristics of the acoustic field to be controlled; i.e., the model density distribution, the degree of reverberation, and on the strength of modal interaction of the control source with the primary source; i.e., the location of control source.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1034-1035
• /
• 2015

Watertight 25.8 kV/600 A/12.5 kA fault current limiters (FCLs) have successfully installed in five areas (Incheon, Seoul, Gyeong-gi, Daejeon, Suwon) on KEPCO power distribution line for the purpose of commercial demonstrations. The fault current limiting operation of this FCL, which includes functions of sensing, commutation, and reduction of fault currents, is perfectly completed within 1 cycle immediately after fault occurs. The performance of FCL was verified by short circuit test, impedance test, insulation test, temperature-rise test, and control test, etc at PT&T in LS industrial systems, which is the official certification institute in Korea. In 2013, and also the FCL field test was performed in order to test the protection coordination between conventional relays and FCL, on the 1.5 kA and 5.0 kA faults, which were made by connecting the Artificial Fault Generator (AFG) to the distribution line in test grid at KEPCO Power Testing Center. The next step of this project is to check the FCL conditions caused by real external environment, and acquire the various data from five regions installed with FCL. In this paper, we intend to explain the FCL specifications and performance characteristics, and check the expected effect by application of FCL to power distribution line based on the power system analysis of an application site.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.65-74
• /
• 2002

This paper examines the usefulness of a Brake Steer System (BSS), which uses differential brake forces for steering intervention in the context of Intelligent Transportation Systems (ITS). In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. This resulting yaw moment on the vehicle affects lateral position thereby providing a limited steering function. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. A 8-DOF nonlinear vehicle model including STI tire model will be validated using the equations of motion of the vehicle. Then a controller will be developed. This controller, which will be a PID controller tuned by Ziegler-Nichols, will be designed to explore BSS feasibility by modifying the brake distribution through the control of the yaw rate of the vehicle.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.811-818
• /
• 2016

This paper suggests a structure of power control system in floating wave-offshore wind hybrid power generation system. We have developed an unified SCADA(Supervisory Control and Data Acquisition) system which can be used to monitor and control PCS(Power Conversion System) based on IEC61850. The SCADA system is essential to perform the algorithm like proportional distribution and data acquisition, monitoring, active power, reactive power control in hybrid power generation system. IEC61850 is an international standard for electrical substation automation systems. It was made to compensate the limitations of the legacy industrial protocols such as Modbus. In order to test the proposed SCADA system and algorithm, we have developed the wind-wave simulator based Modbus. We have designed a protocol conversion device based on real-time Linux for the communication between Modbus and IEC61850. In this study, SCADA system consists of four 3MW class wind turbines and twenty-four 100kW class wave force generator.

• Journal of Medicine and Life Science
• /
• v.16 no.2
• /
• pp.39-42
• /
• 2019

While the notified crude incidence rates(per 100,000 persons, CIR) of new tuberculosis between 2016 and 2017 decreased in nationwide and 16 provinces, except Jeju Province, Korea. The aim of this study was to compare CIRs of Jeju Province and nationwide by calendar years and age groups in order to interpret the increasing trend of CIR in Jeju Province. The data source was the Integrated Diseases and Health Control System of the Korea Centers for Disease Control and Prevention. The selection criteria were the notified new cases as tuberculosis, who had the address as Jeju Province at diagnosis, between 2011 and 2018. The 95% confidence interval of CIR was estimated based on Poisson distribution. There was not statistically significant difference of CIRs between Nationwide and Jeju Province of 2011 and 2018, except 2016. Especially the CIR of group aged over 65 years in Jeju Province, 2016 was significantly lower compared to Nationwide CIR. But, the CIR of group aged 30~50 between 2017 and 2018 showed significantly higher compared to Nationwide CIR. Based on the results, the fact of increasing CIR from 2016 to 2017 in Jeju Province might be interpreted as an introduction of new tuberculosis screening project rather than real increased CIRs.

• Parasites, Hosts and Diseases
• /
• v.44 no.4 s.140
• /
• pp.285-294
• /
• 2006

Changing patterns of the reemerging Plasmodium vivax malaria in the Republic of Korea (South Korea) during the period 1993 to 2005 are briefly analyzed with emphasis on the control measures used and the effects of meteorological and entomological factors. Data were obtained from the Communicable Diseases Monthly Reports published by the Korea Center for Disease Control and Prevention, and webpages of World Health Organization and United Nations. Meteorological data of Kangwon-do (Province) were obtained from local weather stations. After its first reemergence in 1993, the prevalence of malaria increased exponentially, peaking in 2000, and then decreased. In total, 21,419 cases were reported between 1993 and 2005 in South Korea. In North Korea, a total of 916,225 cases were reported between 1999 and 2004. The occurrence of malaria in high risk areas of South Korea was significantly (P < 0.05) correlated with the mosquito population but not with temperature and rainfall, Control programs, including early case detection and treatment, mass chemoprophylaxis of soldiers, and international financial aids to North Korea for malaria control have been instituted. The situation of the reemerging vivax malaria in the Republic of Korea is remarkably improving during the recent years, at least in part, due to the control activities undertaken in South and North Korea.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.189-194
• /
• 2004

The viscoelastic layer material is widely used to control the noise and vibration characteristics of the panel structure. This paper describes the design technology of the effective vibration damping treatment using the concept of the equivalent parameter of viscoelastic layer materials. Applying the equivalent parameter concepts based on theories of shell, it is possible to simulate the finite element analysis of damping layer panel treatments on the vibration characteristics of the structure. And it is achieved the reduced computational cost and the optimal design of topological distribution for the reduction of vibration effect.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.169-171
• /
• 1992

In an automated power distribution systems, the fault situation is controlled from the control center through remotely-controlled sectionalizing switches. In this paper, the service restoration strategy which can yield the minimal switching actions and constraint checking is proposed and an expert system which generates the appropriate switching actions is described.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1987

The biological effects for the use of hypertherinla to treat malignant tumors has been well studied and encouraging clinical results have been reported. However, the engineering and technical aspects of hyperthermia for the deepseated tumors has not been satisfactory. We have developed the FF capacitive hyperthermia device(GHT RF8)by cooporation with Yonsei Cancer Center and Green Cross Medical Equipment Corporation. It was composed with 8.10 MHz RF generator, capacitive electrode, matching system, cooling system, temperature measuring thermocouples and control PC computer. We have measured the temperature and thermal distribution in agar phantom, animals and human tumors.