• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.119-123
• /
• 2016

Thyroid cancer, the most common endocrine neoplasia, consists of four main types of carcinomas: papillary, follicular, and anaplastic, all with thyroid follicular origin, and medullary thyroid cancer (MTC) related to para-follicular cells. Cronic diseases such as diverse cancers may be associated with cachexia, especially at advanced stage. Cancer-induced cachexia is associated with diminished quality of life, functional performance, reduced response to antitumor therapy, and increased morbidity and mortality. Myostatin (Mst) is one of the outstanding molecules in the skeletal muscle loss process in cancer and it may be released by both skeletal muscle and cachexia-inducing tumors. Recently changes in serum levels of Mst have been identified as an important factor of cancer-induced cachexia. The goal of this study was to assessserum Mst levels in MTC patients. In this descriptive and case-control study, 90 participants were selected, comprising 45 MTC patients (20 males, $29{\pm}13.9years$, 25 females, $29{\pm}14.5years$) and 45 control individuals (25 males, $23.1{\pm}11.6years$, 20 females, $31.5{\pm}14.4years$). Serum Mst was determined using an ELISA kit and body mass index (BMI) was calculated by weight and height measurements. The Kolmogorov Simonov test showed a normal distribution for log transformed Mst serum levels in both case and control groups. Geometric means were 5.9 and 8.2 ng/ml respectively, and a significant difference was found according to the independent t-test results (P<0.01). There was also a significant difference mean of Mst between females in control and MTC groups, but not for the males. Pearson correlation test showed no correlation between age and BMI with Mst serum levels. The findings of this study support the hypothesis that Mst serum levels may have a potential ability for early diagnosis of cachexia in MTC patients, especially in females.

• Parasites, Hosts and Diseases
• /
• v.46 no.3
• /
• pp.199-201
• /
• 2008

Toxoplasma gondii is an obligate intracellular zoonotic protozoan with a worldwide distribution. It infects humans as well as a broad spectrum of vertebrate hosts. Cats and wild felidae play crucial roles in the epidemiology of toxoplasmosis. This study was performed to survey the prevalence of T. gondii infection among stray cats in the Gyeonggi-do, Republic of Korea. A total of 174 stray cat blood samples were collected from Gwacheon-si (n = 20), Bucheon-si (82), and Yangju-si (72). Positive sera for T. gondii were identified in 14 samples (8.1%) exclusively via the latex agglutination test, 28 (16.1%) via ELISA, and 23 (13.2%) via PCR analysis. The overall infection rate of female stray cats (29.2%) presented as higher than that of male cats (24.0%). This study suggests that T. gondii is widespread in the stray cat population of Gyeonggi-do, Korea. It is urgently needed to control urban stray cat population and to reduce the risk of zoonotic transmission of toxoplasmosis to other animal hosts and humans.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.252-256
• /
• 1998

Accurate mapping of satellite images is one of the most important Parts in many remote sensing applications. Since the position and the attitude of a satellite during image acquisition cannot be determined accurately enough, it is normal to have several hundred meters' ground-mapping errors in the systematically corrected images. The users which require a pixel-level or a sub-pixel level mapping accuracy for high-resolution satellite images must use a number of Ground Control Points (GCPs). In this paper, the performance of two geometric correction algorithms is tested and compared. One is the polynomial warping algorithm which is simple and popular enough to be implemented in most of the commercial satellite image processing software. The other is full camera modelling algorithm using Physical orbit-sensor-Earth geometry which is used in satellite image data receiving, pre-processing and distribution stations. Several criteria were considered for the performance analysis : ultimate correction accuracy, GCP representatibility, number of GCPs required, convergence speed, sensitiveness to inaccurate GCPs, usefulness of the correction results. This paper focuses on the usefulness of the precision correction algorithm for regular image pre-processing operations. This means that not only final correction accuracy but also the number of GCPs and their spatial distribution required for an image correction are important factors. Both correction algorithms were implemented and will be used for the precision correction of KITSAT-3 images.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1629-1631
• /
• 1998

Crosslinked polyethylene (XLPE) insulated cables are now widely used all over the world for extra-high voltage underground transmission systems. Prefabricated type (compression type) joint has developed in order to shorten the assembly time and lower the possibility of contamination at site by many companies in the world. For outdoor termination, to control the electric field distribution as uniform as possible, especially for the use of extra-high voltage system. much of products are adopting the oil-impregnated condensor cone type instead of electric field control element which uses the permitivity of it only (not capacitance). For Gas-immersed termination, dimension of outer insulation bushing was determined by IEC Publication 859. The highest voltage of underground power cable system is 345kV now, in Korea. We have much of experiences of the development of prefabricated type accessories for CV cable systems (154kV, 161kV, 230kV level). So it was possible to inspect the proto type of accessories for 345kV CV cable system and seems that the need time for the development of products is reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.247-252
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.541-545
• /
• 1996

In this paper, The performance and functions of automatic flatness control system installed on the 4 hi-reversing mill and has been investigated under actualconditions. A new automatic flatness control system incorporates a measuring roll for measurement and correction calculations, hydraulic roll benders, selective roll cooling, and a programmable controller for interface and data logging. The test results are as following. The more the exit steel strip thickness is thick, the smaller the I value, and the more it is thin, the larger the I value. And, a complex distribution of strip tension was controlled, for example, not only a quarter buckle but also a simple center wave and edge wave. Because the tension deviation is larger at acceleration speed and deceleration speed than steady speed, so automatic flatness control system of contact type is better to adopt over 450 m/min, automatic flatness control system reduces rapidly large flatness deviation. The maximum I value of strip has been decreased to 13 I, and defects caused by poor flatness have been drastically decreased. And coolant temperature for work roll cooling system on the automatic flatness control system is better to adopt about 50-55 .deg. C.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.831-835
• /
• 2000

The uniformity of themperature on a wafer is a wafer is one the most important parameters to conterol the RTF(Rapid Thermal Process) with proper input signals. It is impossible to achieve the uniformity of temperature without the exact estimation of temperature ar all points on the wafer. There fore, it is difficult to understand the internal dynamics as well as the structural complexities of the RTP, which is aprimary obstacle to measure the distributed temperatures on the wafer accurately. Furthermore, it is also hard to accomplish desirable estimation because only a few pyrometers are available in the general equipments. In the paper, a thermal model based on the chamber grometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through simulation and experiments. The proposed work can be utilized to building a run-by -run or a real-time control of the RTP.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1293-1300
• /
• 2008

This paper presents an active vibration control of cantilever beams under disturbances by a primary force. A direct velocity feedback control using a pair of PZT actuator and a velocity sensor is considered. Variation of the stability and performance with the locations of the sensor/actuator pair is investigated. It is found that the maximum gain varies with the locations of the sensor/actuator pair significantly. The maximum gain shows a symmetric distribution along the beam length with respect to the center point, although the boundary condition of the beam is unsymmetric. The control performance is affected by the location of the primary force as well as the location of the sensor/actuator pair. The active control system can more effectively reduce the vibration when the primary force is located close to the fixed boundary.

• The Journal of Korean Medicine
• /
• v.30 no.1
• /
• pp.109-119
• /
• 2009

Objectives: This study was aimed to clarity the relationship between the pattern of dampness-phlegm and metabolic syndrome in acute stroke patients. Methods: Three hundred fifty-nine subjects were recruited from the patients admitted to the Internal Medical Department at Kyunghee University Oriental Medical Center, Donggnk University Ilsan Oriental Medical Center, Kyungwon University Songpa Oriental Medical Center and Kyungwon University Incheon Oriental Medical Center from April 2007 to March 2008. We diagnosed dampness-phlegm by Oriental medical diagnosis and analyzed their characteristics with type of stroke, blood test result, Sasang constitution, lifestyle and metabolic syndrome. Results: I. On the demographic variables of the patients, the weight and body mass index, the rate of hypertension, diabetes mellitus, hyperlipidemia, silent infarction were significantly higher in dampness-phlegm group than in the control. 2. There was no significant difference of stroke type between the dampness-phlegm group and the control. 3. According to the blood test, the dampness-phlegm group showed higher total cholesterol, triglyceride, fasting blood sugar and lower high density lipoprotein cholesterol than the control group with statistical significance. 4. According to the Sasang constitution distribution, the rate of Tae-Eum was significantly higher in dampness-phlegm group than in the control. 5. According to lifestyle, smoking and drinking were significantly lower in the dampness-phlegm group than in the control. Otherwise, exercise and dietary habits showed no significant difference between the two groups. 6. There were much more patients diagnosed with metabolic syndrome in the dampness-phlegm group than in the control. 7. Metabolic syndrome, silent infarction and obesity showed close relationship with dampness-phlegm pattern in multivariate analysis. Conclusions: According to the analysis, the relationship between the patterns of dampness-phlegm and metabolic syndrome in acute stroke patients were clarified. These results can be utilized in the future as a basis material.