• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1721-1728
• /
• 2018

Objective: The use of genetic markers can help to enhance reproduction in cattle, which is a very important trait for profitability in dairy production systems. This study evaluated the association between genotypes of leptin (LEP), toll-like receptor 4 (TLR4), and chemokine receptor of interleukin 8 C-X-C motif (CXCR1) genes and fertility traits in Czech Fleckvieh cattle. Methods: Phenotypic data from 786 Czech Fleckvieh cows raised on 5 farms in the Czech Republic were used, along with information from the 1st three parities. To determine genotype, the polymerase chain reaction-restriction fragment length polymorphism method was used. Results: Except for LEP g.-963C>T, all studied genotype frequencies of single nucleotide polymorphisms (SNPs) were distributed according to the Hardy-Weinberg equilibrium. Two LEP SNPs (g.-963C>T and c.357C>T) were associated with the age at the 1st calving, days open (DO), pregnancy rate after 1st service (PR), and calving interval (CLI). In LEP g.-963C>T the TT genotype heifers firstly calved 24 days earlier than CC genotype and the CT genotype cow showed a tendency for shorter DO and higher PR. In LEP c.357C>T we observed longer CLI and DO period in TT cows. In general, we can propose the TT genotype of g.-963C>T as favorable and the TT genotype of c.357C>T as unfavorable for a cow's fertility. Heterozygotes in TLR4 c.-226C>G were significantly associated with shorter CLI, and presented a nonsignificant tendency to be associated with higher PR. In CXCR1 c.777 C>G, we did not observe any relationship of this SNP with reproduction. Conclusion: Overall, the results showed that LEP could be an effective marker for improving reproduction in Czech Fleckvieh cattle. This study also provides novel insights into the relationship between TLR4 and CXCR1 SNPs and reproduction in dual-purpose cattle.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.139-150
• /
• 2006

A schematic map is a special purpose map which is generated to recognize it's objects easily and conveniently via simplifying and highlighting logical geometric information of a map. To manufacture the schematic map with road, label and icon, we must generate simplified route map and replace many geometric objects. Performing a give task, however, there are an amount of overlap areas between geometric objects whenever we process the replacement of geometry objects. Therefore we need replacing geometric objects without overlap. But this work requires much computational resources, because of the high complexity of the original geometry map. We propose the schematic map generation system whose map consists of icons and label. The proposed system has following steps: 1) eliminating kinks that are least relevant to the shape of polygonal curve using DCE(Discrete Curve Evolution) method. 2) making an evenly distributed route using CVT(Centroidal Voronoi Tessellation) and Grid snapping method. Therefore we can keep the structural information of the route map from CVT method. 3) replacing an icon and label information with collision avoidance algorithm. As a result, we can replace the vertices with a uniform distance and guarantee the available spaces for the replacement of icons and labels. We can also minimize the overlap between icons and labels and obtain more schematized map.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.325-336
• /
• 2006

Domestic serpentinite is one of the important industrial minerals utilizing in the iron manufacturing company such as POSCO in Korea. Serpentinite is distributed in the Ulsan Fe deposit, Andong, Hongseong-Cheongyang, and Gapyeong areas. This study tries to interpret the relationship among the formation of carbonate rocks, iron mineralization, and serpentinite alteration throughout the study of field occurrence, mineralogy, and chemical compositions. Serpentine is formed by the break-down of olivine and pyroxene of parent peridotite. The serpentinization is inferred to be formed by the hydrothermal fluid derived from intruded Cretaceous granite and the addition of meteoric water. Variation of major oxides such as $SiO_2,\;Fe_2O_3$, and MgO in serpentinized rocks are controlled by the degree of serpentinization and Fe mineralization. Variation of $Al_2O_3$ and CaO contents of altered rocks is dependent on the amount of the residual minerals such as calcite and homblende, and on the degree of chloritization. The presence of carbonate rocks reported in the sedimentary origin or igneous origin (carbonatite) provided a geological environment to form skarn type Fe deposit regardless of its origin. The geological processes of Ulsan Fe deposits are inferred to be formed as the order of the formation of carbonate rocks ${\to}$ the intrusion of Cretaceous granite ${\to}$ serpentinization ${\to}$ Fe mineralization by the interprelation of field occurrence and mineralogical characteristics.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.700-708
• /
• 2013

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. Pyroprocessing has been developed with the dry technologies which are performed under high temperature conditions excluding any aqueous processes. Pyro-processes which are based on the electrochemical principles require pretreatment processes and a voloxidation process is considered as a pretreatment step for an electrolytic reduction process. Various kinds of gas conditions are applicable to the voloxidation process and the understanding of Cs behavior during the process is of importance for the analyses of waste characteristics and heat load on the overall pyroprocessing. In this study, the changes of chemical compounds with the gas conditions were calculated by analyzing gas-solid reaction behavior based on the chemical equilibria on a Cs-Te-O system. $Cs_2TeO_3$ and $Cs_2TeO_4$ were selected after a Tpp diagram analysis and it was confirmed that they are relatively stable under oxidizing atmospheres while it was shown that Cs and Te would be removed by volatilization under reducing atmosphere at a high temperature. This work provided basic data for predicting Cs behavior during the voloxidation process at which compounds are chemically distributed as the first stage in the pyroprocessing and it is expected that the results would be used for setting up material balances and related purposes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.1-12
• /
• 1999

This study aims to find basic data for using the quantitative assessment of the sustainability and establishing the systematic index of the planning for local cities to consider the environmentally sound and sustainable development. The research designs to review professional responding to surveys preceded by separate questionnaires and interviews from book reviews, and suggests to make an assessment model of the sustainability for local cities. The research found consequently as follows. Firstly, the research survey items were decides totally 52, grouped 9 assessmental issues and distributed under 4 assessmental domains for the sustainability from the references of book reviews. Secondly, the research result concentrated on the followings from the professional responding to surveys. 1. A most influent factor is the distribution of animals and plants in a nature domain. The next influent factors are the ratio of mass-transportation systems, the numbers of the species of animals and plants, the acreage of conservative forestry, the numbers of reused water resources, and the usage number of water supply, orderly in the nature domain. 2. A most influent factor is the usage number of synthetic detergents in a pollution domain. The next influent factors are the volume of waste water, the number of registered vehicles, the degree of soil pollution, and the charge of development imposition, orderly in the pollution domain. 3. A most influent factor is the acreage of athletic facilities, in an urban domain. the next influent factors are the acreage of recreational facilities, the number and acreage of cultural assets, the number of cultural facilities, the acreage of landscape conservation area, the charge of cultural asset management, orderly in the urban domain. 4. A most influent factor is the number of waste disposal facilities in a participation domain. The next influent factors are the capacity of reused waste, the usage of synthetic detergents, the ratio of waste water disposal, orderly in the participation domain. 5. A most contributed influent domain to the assessment of the sustainability for local cities is the urban domain. The next influent domains are nature domain, participation domain, and pollution domain, orderly in the contribution of the assessment of the sustainability. But, the pollution domain is little relationship with the sustainability. Therefore, it is clear that the abundant greens and the improved level of culture are dominant influences on the sustainabiligy, as like improving the ratio of roadside trees, the acreage of parks, and enlarging the number of cultural facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.316-325
• /
• 2018

In this paper, to integrate distributed IT resources and manage human resource efficiently as purpose of cost reduction, infrastructure of wind turbine monitoring system have been designed and developed on the basis of SaaS cloud. This infrastructure hierarchize data according to related task and services. Softwares to monitor conditions via the infrastructure are also developed. Softwares are made up of DB design, field measurement, data transmission and monitoring programs. The infrastructure is able to monitor conditions from SCADA data and additional sensors. Total time delay from field measurement to monitoring is defined by modeling of step-wise time delay in condition monitoring algorithms. Since vibration data are acquired by measurements of high resolution, the delay is unavoidable and it is essential information for application of O&M program. Monitoring target is gearbox in wind turbine of MW-class and it is operating for 10 years, which means that accurate monitoring is essential for its efficient O&M in the future. The infrastructure is in operation to deal with the gearbox conditions with high resolution of 50 TB data capacity, annually.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.528-535
• /
• 2020

Recently, the protection coordination method of DC systems has been presented because renewable energy and distributed resources are being installed and operated in distribution systems. On the other hand, it is difficult to detect ground faults because there is no significant difference compared to a steady-state current in ungrounded IT systems, such as DC load networks and urban railways. Therefore, this paper formulates the detection principle of IMD (Insulation Monitoring Device) to use it as a protection coordination device in a DC system. Based on the signal injection method of IMD, which is analyzed by a wavelet transform, this paper presents an algorithm of detecting ground faults in a DC system in a fast and accurate manner. In addition, this paper modeled an IMD and an ungrounded DC system using the PSCAD/EMTDC S/W and performed numerical analysis of a wavelet transform with the Matlab S/W. The simulation results of a ground fault case in an ungrounded DC system showed that the proposed algorithm and modeling are useful and practical tools for detecting a ground fault in a DC system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.537-545
• /
• 1996

A population study on the sternaspid polychaete Sternaspis scutata (Ranzani) was conducted in Chinhae Bay, Korea, from lune 1987 to May 1990. Sternaspis scutata was chiefly distributed in the mouth area of the bay, and its distributional delimitation remained unchanged all the year round. Abundance of this species appeared to be related to the organic carbon content of the sediment. It was relatively high in the area where the organic content of the sediment was between 2.0 and $4.0\%(mean\;3.8{\pm}1.11)$ with mean grain size of $8.75\phi$. The relationship between the length of the ventral plate and the body wet weight is Wt=13.2752 $L^{2.7984}(R^2=0.962)$. Therefore, the length of ventral plate can be used as an indicator of body growth of this species. The growth curves fitted to yon Bertalanffy equations for ventral plates and weights are $L_{t}=5.235(1-e^{-0.3625(t-0.4047)})$ and $W_{t}=1364.1(1-e^{-0.3625(t-0.4047)})^{2.7984}$, respectively. Size frequency histograms showed that the settlement occurred during all the year round with its peak in summer.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.38-50
• /
• 2008

The site-specific seismic responses and corresponding seismic hazards are influenced mainly by the subsurface geologic and geotechnical dynamic characteristics. To estimate reliably the seismic responses in this study, a geotechnical information system (GTIS) within GIS framework was developed by introducing new concepts, which consist of the extended area containing the study area and the additional site visit for acquiring surface geo-knowledge data. The GIS-based GTIS was built for Gyeongju area, which has records of abundant historical seismic hazards reflecting the high potential of future earthquakes. At the study area, Gyeongju, intensive site investigations and pre-existing geotechnical data collections were performed and the site visits were additionally carried out for assessing geotechnical characteristics and shear wave velocity ($V_S$) representing dynamic property. Within the GTIS for Gyeongju area, the spatially distributed geotechnical layers and $V_S$ in the entire study area were reliably predicted from the site investigation data using the geostatistical kriging method. Based on the spatial geotechnical layers and $V_S$ predicted within the GTIS, a seismic zoning map on site period ($T_G$) from which the site-specific seismic responses according to the site effects can be estimated was created across the study area of Gyeongju. The spatial $T_G$ map at Gyeongju indicated seismic vulnerability of two- to five-storied buildings. In this study, the seismic zonation based on $T_G$ within the GIS-based GTIS was presented as regional efficient strategy for seismic hazard prediction and mitigation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.1
• /
• pp.47-58
• /
• 2000

Geographical distribution of salps was elucidated in the South Sea of Korea with focusing on the April and June, 1997 when swarm of salps occurred. We also discussed on its distributional pattern in relation to environment conditions and its impact on marine ecosystem with emphasizing on trophodynamics. Salps were abundantly distributed in the south-eastern area of Cheju Island where is closely associated with the Tsushima Warm Current. In April and June, 1997, surface water temperature was $2{\sim}5^{\circ}C$ higher than the average over 1961-1998, while surface water salinity was lower. Chlorophyll-a concentration, density of copepods and catches of mackerel sharply decreased in April and June, 1997. These results suggest that the swarm of salps was due to not only transportation by strong Tsushima Warm Current but also supply of abundant foods. Low densities of copepods may be related to the presence of swarm of salps because of food competition between them. The fact that the catches of mackerel were very low in April and May, 1997 suggests that the trophodynamics between salps and copepods also influence the fish resources.