• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.48-55
• /
• 2005

In this paper, a mathematical model and a simulation method for the response time analysis of Local Interconnect Network(LIN) based network systems are proposed. Network-induced delays in a network based control system can vary widely according to the transmission time of message and the overhead time of transmission. Therefore, in order to design a distributed control system using LIN network, a method to predict and verify the timing behavior of LIN protocol is required at the network design phase. Furthermore, a simulation environment based on a timing model of LIN protocol is beneficial to predict the timing behavior of LIN. The model equation is formulated with six timing parameters deduced from timing properties of LIN specification. Additionally, LIN conformance test equations to verify LIN device driver are derived with timing constraints of the parameters. The proposed model equation and simulation method are validated with a result that is measured at real LIN based network system.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.905-914
• /
• 2005

This paper suggests a healthcare home service system based on the distributed object group framework that can not only provide healthcare application services using the information obtained from the physical healthcare sensors and devices, and but also monitor and control these services remotely. The distributed object group framework supports the object group service, the interaction service between object groups and the real-time service in order to execute the healthcare application. Here object group means the unit of logical grouped objects or healthcare sensors and devices for a service. Our suggested system consists of 3 layers. The first layer presents the physical sensors and devices for healthcare, as a physical layer. The second layer lays the distributed object group framework, and the third layer, the upper's one, implements healthcare applications based on lower layers. With healthcare applications providing for this system, we implemented the location tracking service, the health information service and the titrating environment service. Also the integrated executing results of these services can be monitored and controlled via remote desktop systems or PDAs.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.2
• /
• pp.67-72
• /
• 2015

Power grid techniques are distributed over general power systems ranging from power stations to power transmission, power distribution, and users. To monitor and control the elements and performance of a power system in real time in the extensive area of power generation, power transmission, wide-area monitoring (WAM) and control techniques are required (Sattinger et al. 2007). Also, to efficiently operate a power grid, integrated techniques of information and communication technology are required for the application of communication network and relevant equipment, computing, and system control software. WAM should make a precise power grid measurement of more than once per cycle by time synchronization using GPS. By collecting the measurement values of a power grid from substations located at faraway regions through remote communication, the current status of the entire power grid system can be examined. However, for GPS that is used in general national industries, unexpected dangerous situations have occurred due to its deterioration and jamming. Currently, the power grid is based on a synchronization system using GPS. Thus, interruption of the time synchronization system of the power system due to the failure or abnormal condition of GPS would have enormous effects on each field such as economy, security, and the lives of the public due to the destruction of the synchronization system of the national power grid. Developed countries have an emergency substitute system in preparation for this abnormal situation of GPS. Therefore, in Korea, a system that is used to prepare for the interruption of GPS reception should also be established on a long-term basis; but prior to this, it is required that an evaluation technique for the time synchronization performance of a GPS receiver using an atomic clock within the power grid. In this study, a monitoring system of time synchronization based on GPS at a power grid was implemented, and the results were presented.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1003-1007
• /
• 1987

The system start-up function of TDX-1A that should be executed during installation or emergency has been designed to meet requirements of the distributed real time control system. It is performed in a centralized manner by the dedicated processor according to the maintenance and administration mechanism of the system. Upon execution, it provides information on the system state for the ESS personal. In additions, it protects the loss the charging and statistics data, and minimizes the effect on the customer service. This paper describes the design concept of the system startup function and its implementation method and also calculates its the execution time.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.266-269
• /
• 2004

A satellite ground control system (SGCS) which monitors and controls a geostationary satellite 24 hours a day has to achieve the system architecture assuring high-level availability and redundancy scheme. The SGCS for Communication, Ocean, and Meteorological Satellite (COMS) is currently being developed in Korea, which will be implemented to satisfy high availability (HA), expansibility, and compatibility in design. In order to implement the system architecture to meet these characteristics, the SGCS for COMS introduces the concept of the real-time distributed system structure based on redundancy scheme for high availability, data replication and sharing, and CORBA middleware.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.413-417
• /
• 1997

Distributed piezoelectric sensor and actuator have been designed for efficient vibration control of a cantilevered beam. Both PZT and PVDF are used in this study, the former as an actuator and the latter as a sensor for our integrated structure. For the PZT actuator, the position and size have been optimized. Optimal electrode shape of the PVDF sensor has been determined. For multi-mode vibration control, we have used two PZT actuators and a PVDF sensor. Electrode shading of PVDF is more powerful for modal force adjustment than the sizing and positioning of PZT. Finite element method is used to model the structure that includes the PZT actuator and the PVDF sensor. By deciding on or off of each PZT segment, the length and the location of the PZT actuator are optimize. Considering both of the host structure and the optimized actuators, it is designed that the active electrode width of PVDF sensor along the span of the beam. Actuator design is based on the criterion of minimizing the system energy in the control modes under a given initial condition. Sensor is designed to minimize the observation spill-over. Modal control forces for the residual(uncontrolled) modes have been minimized during the sensor design. Genetic algorithm, which is suitable for this kind of discrete problems, has been utilized for optimization. Discrete LQG control law has been applied to the integrated structure for real time vibration control. Performance of the sensor, the actuator, and the integrated smart structure has been demonstrated by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.334-337
• /
• 2005

This paper describes the implementation of DCS communication network that provides high bandwidth and reliability. The network for DCS in this paper adopts the Reflective Memory (RM) architecture and Fast Ethernet physical media that have 100Mbps bandwidth. Also, this network uses Ring Enhancement Device (RED) which was invented to reduce the time delay of each node. The DCS network that is introduced in this paper is named as ERCNet(Ethernet based Real-time Control Network). This paper describes the architecture and working algorithms of ERCNet and performs numerical analysis. In addition, the performance of ERCNet is evaluated by experiment using the developed ERCNet network.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.150-161
• /
• 1999

This paper deals with the design and development of a real-time integrated communication architecture for heterarchical SFCS(Shop Floor Control System). In autonomous agent-based heterarchical SFCS, each functional unit of parts and resources is equipped with an intelligent controller (agent) that acts as the representative of the entity. The controllers communicate and negotiate with other controllers on a real-time basis through message passing and bidding protocol to achieve mutual agreements for task sharing. ICPL(Integrated Communication Protocol and Language) is proposed for this purpose. ICPL is a language and a protocol for supporting communication among intelligent controllers. Based on the speech act theory, this paper proposes a semantic description for ICPL that associates the description of the cognitive states of controllers with the use of language primitives (message_type). Semantics for the basic set of ICPL messages is described. Eventually, an ICPL-based communication architecture can provide the implementation of the distributed and heterarchical SFCS, and makes the intelligent controller transparent to the negotiation problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.408-411
• /
• 1995

In this paper, we discuss the force control of flexible manipulators. Since the force control of flexible manipulators with planar one or two links using the distributed-parameter modeling has been the subject of a considerable number of publications until now, real time computations of the force control schemes are possible. But, application of those control schemes to multi-link spatial manipulators is fairly complicated. In this paper, we apply a concise hybrid position/force control scheme for a flexible manipulators. We use a lumped-parameter modeling for the flexible manipulators. The Hamilton's principle is applied to derive the equations of motion for the system and then, state-space model is obtained by the Lagrange's method. Finally, comparison of simulation results with experimental results is given to show the performance of our method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.