• Applied Microscopy
• /
• v.25 no.2
• /
• pp.20-28
• /
• 1995

This study observes the change of small intestine mucosa paneth cell by changing the amount of radiation to rat. It uses the rat(Wistar) of 250-300g as the experimental animal and irradiation equipment is Gammacell 3000Elan System. and the irradiation is conducted for 500Rad group for 34sec., 1000rad for 68sec., and 1500Rad for 102sec. once on the whole body of each group, eachgroup is anesthetized with ether after 24hours. its small intestine is extrated and then it is observed by transmission electronic microscopy. The experimental results are as follows : 1. 500 Rad Group The Slightly elongated form of mitochondria and rough endoplasmic reticulum are observed in 500 Rad group. 2. 1000 Rad Group Golgi apparatus is appeared as the extended plasmodium, secretory granules exist only external membrane due to the self-fusion, the number of mitochondria that are changed as L-type are reduced, rough endoplasmic reticulum is distributed with the expanded form. 3. 1500 Rad Group The number of Golgi apparatus and granules is remarkably reduced, mitochondria is changed into C-type and free ribosomes can be observed instead of the reduction of rough endoplasmic reticulum.

• Parasites, Hosts and Diseases
• /
• v.55 no.2
• /
• pp.109-114
• /
• 2017

Protein arginine methyltransferase (PRMT) is an important epigenetic regulator in eukaryotic cells. During encystation, an essential process for Acanthamoeba survival, the expression of a lot of genes involved in the encystation process has to be regulated in order to be induced or inhibited. However, the regulation mechanism of these genes is yet unknown. In this study, the full-length 1,059 bp cDNA sequence of Acanthamoeba castellanii PRMT1 (AcPRMT1) was cloned for the first time. The AcPRMT1 protein comprised of 352 amino acids with a SAM-dependent methyltransferase PRMT-type domain. The expression level of AcPRMT1 was highly increased during encystation of A. castellanii. The EGFP-AcPRMT1 fusion protein was distributed over the cytoplasm, but it was mainly localized in the nucleus of Acanthamoeba. Knock down of AcPRMT1 by synthetic siRNA with a complementary sequence failed to form mature cysts. These findings suggested that AcPRMT1 plays a critical role in the regulation of encystation of A. castellanii. The target gene of AcPRMT1 regulation and the detailed mechanisms need to be investigated by further studies.

• The Journal of Korea Robotics Society
• /
• v.2 no.4
• /
• pp.317-326
• /
• 2007

Recently, robotic automation in clinical laboratory becomes of keen interest as a fusion of bio and robotic technology. In this paper, we present a new robotic platform for clinical tests suitable for small or medium sized laboratories using mobile robots. The mobile robot called Mobile Agent is designed as transfer system of blood samples, reagents, microplates, and any instruments. Also, the developed mobile agent can perform diverse tests simultaneously based on its cooperative and distributed ability. The driving circuits for the mobile agent are embedded in the robot, and each mobile agent communicates with other agents by using Bluetooth communication. The RFID system is used to recognize patient information. Also, the magnetic hall sensor is embedded to remove and compensate the cumulated error of locomotion at the bottom of mobile agent. The proposed mobile agent can be easily used for various applications because it is designed to be compatible with general software development tools. The Mobile agents are manufactured, and feasibility of the robot and localization of the agents using magnetic hall sensor are validated by preliminary experiments.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.3
• /
• pp.113-119
• /
• 2013

Grain growth behaviors of hot-rolled AZ31 (Mg-3%Al-1%Zn) and AZ31-0.3%CaO alloys at elevated temperatures have been investigated in order to clarify the effect of CaO addition on grain stability of Mg-Al-based wrought alloy. The grain size of CaO-free alloy increased steeply from 673 K with an increase in annealing temperature from 573 to 773 K, whereas the grains of CaO-containing alloy were relatively stable up to 723 K. The activation energies for grain growth ($E_g$) were 12.2 and 18.3 kJ/mole between 573 and 673 K and 119.2 and 126.9 kJ/mole between 673 and 773 K in the AZ31 and AZ31-0.3%CaO alloys, respectively. This result indicates that grains in the CaO-added alloy possess higher thermal stability than CaO-free alloy. SEM observations on the annealed alloy samples revealed that higher grain stability resulting from CaO addition would be associated with the suppression of grain growth by Ca-related precipitate particles distributed in the microstructure.

• The Research Journal of the Costume Culture
• /
• v.17 no.1
• /
• pp.90-104
• /
• 2009

If people want to project a successful personal style, hair style might play a big role as well as clothing. The purpose of this study was to observe hair behavior according to demographic variables, and to analyze correlation between desired hair image and clothing image sought. Questionnaires were distributed to 600 females aged $20s{\sim}40s$, using a convenient sampling method. Only 556 reliable questionnaires were selected for statistical analysis. Correlation r, ANOVA and Chi-square were used to analyze the data, using the SPSS program. There was a significant association between hair style and occupation. Career woman preferred roll straight perm treated hair, students preferred general perm treated hair and full time house wives preferred general wave perm treated. The medium layer cut was the most preferred cut style. People want to give different accents in hair styling with occupation and age variable. Certain desired clothing image had a high correlation with desired hair style image. Those who people want to express sexy, and bohemian image through clothing, they also want to create those image in hair styling with a high correlation(r=0.683, r=0.704).

• Parasites, Hosts and Diseases
• /
• v.45 no.3
• /
• pp.165-174
• /
• 2007

Toxoplasma gondii GRA10 expressed as a GFP-GRA10 fusion protein in HeLa cells moved to the nucleoli within the nucleus rapidly and entirely. GRA10 was concentrated specifically in the dense fibrillar component of the nucleolus morphologically by the overlap of GFP-GRA10 transfection image with IFA images by monoclonal antibodies against GRA10 (Tg378), B23 (nucleophosmin) and C23 (nucleolin). The nucleolar translocalization of GRA10 was caused by a putative nucleolar localizing sequence (NoLS) of GRA10. Interaction of GRA10 with TATA-binding protein associated factor 1B (TAF1B) in the yeast two-hybrid technique was confirmed by GST pull-down assay and immunoprecipitation assay. GRA10 and TAF1B were also co-localized in the nucleolus after co-transfection. The nucleolar condensation of GRA10 was affected by actinomycin D. Expressed GFP-GRA10 was evenly distributed over the nucleoplasm and the nucleolar locations remained as hollows in the nucleoplasm under a low dose of actinomycin D. Nucleolar localizing and interacting of GRA10 with TAF1B suggested the participation of GRA10 in rRNA synthesis of host cells to favor the parasitism of T. gondii.

• Journal of the Korean Home Economics Association
• /
• v.42 no.12 s.202
• /
• pp.253-264
• /
• 2004

The purpose of this study was to conduct research on consumers who seek to portray an image through their living atmosphere and clothing, and to survey the home fashion design preference of Korean women, aged in their 20s to 40s. We distributed questionnaires to 600 women. The reliable questionnaires were used for a statistical analysis. Data analyses were conducted with SPSS program on ANOVA and Pearson correlations. We obtained the following results: 1. Women who are living in larger housing sought 'elegant', 'sophisticated', and 'gorgeous' images. There was a high correlation between the image sought through the surrounding environment and the image sought with clothing. Those who wanted an image of Korean traditional and classic living environment, also sought the same image in their clothing. 2. There was a significant difference in the preference of home fashion products among women seeking specific images in their living environment. In the preference of children's bed sheets and comforters, there was a significant difference in Korean traditional image. In addition, there was a significant difference in the preferred types of curtains in elegant, sophisticated, gorgeous and classic seeking images of environment. These results may be useful for the home fashion stylist or home fashion marketer.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.625-634
• /
• 1986

The strain distribution on a welded aluminum alloy transition joint produced by a static tensile load has been measured using a moire method combined with photoelastic coating method. The test specimens were made of aluminum alloy 6061-T6 and 2014-T6 butt welded with ER-4043 filler metal, and were post welded heat treated (solid solution heat treatment 502.deg. C 70min.) and precipitated (artificial aging 171.deg. C 600min.) to cause an abrupt change of mechanical properties between the base metals and weld metal. The photoelastic epoxy rubber was cemented on the specimen grating which had been reproduced on the specimen surface by using an electropolishing. The measurements were compared with strains computed by Finite Element Analysis. The following results were abtained. (1) The maximum strain were distributed along the center line in the transverse directiion of the weld metal. (2) The strain gradient along the fusion line increased approaching the V-groove tip and the maximum value was observed at a quarter of width from the V-groove tip. (3) The moire method combined with photoelastic coating was proved very useful for real time strain measurement in the welded aluminum alloy transition joint.

• Journal of Welding and Joining
• /
• v.31 no.2
• /
• pp.30-36
• /
• 2013

Recently the use of ultra high strength steels(UHSS) in structural and safety component is rapidly increasing in the automotive industry. Furthermore, it commonly use in tailor welded blank laser welding process before hot stamping to reduce lightweight vehicle. However TWB process is to be a problem about welded strength after hot stamping because it's welded before heat treatment. Therefore, in this study, laser welds of TWB after heat treatment were analyzed for changes in the characteristics, especially the impact on the oxidation and decarburization in order to prevent pre-coated Al-Si layer welds on the properties for intensive investigation. As a result, the degradation of the TWB weldments changes in the heat treatment conditions alone, without any pre-treatment of the coating layer has confirmed that there is a limitation on the improvement. Furthermore Al-Si elements are overall distributed on the weldment and it specially concentrated along the fusion line. Hardness value of Al-Si segregation area is less than 350Hv and tensile strength showed just 78~83% compared with substrate. Accordingly, we proved that both side Al-Si coating should be removed in order to ensure the strength of the substrate.

• Molecules and Cells
• /
• v.43 no.1
• /
• pp.76-85
• /
• 2020

MARCH5 is a RING finger E3 ligase involved in mitochondrial integrity, cellular protein homeostasis, and the regulation of mitochondrial fusion and fission. To determine the function of MARCH5 during development, we assessed transcript expression in zebrafish embryos. We found that march5 transcripts were of maternal origin and evenly distributed at the 1-cell stage, except for the mid-blastula transition, with expression predominantly in the developing central nervous system at later stages of embryogenesis. Overexpression of march5 impaired convergent extension movement during gastrulation, resulting in reduced patterning along the dorsoventral axis and alterations in the ventral cell types. Overexpression and knockdown of march5 disrupted the organization of the developing telencephalon and diencephalon. Lastly, we found that the transcription of march5 was tightly regulated by the transcriptional regulators CHOP, C/EBPα, Staf, Znf143a, and Znf76. These results demonstrate the essential role of March5 in the development of zebrafish embryos.