• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06b
• /
• pp.95-100
• /
• 1996

User's qualities of services (QoS) are the basic requirements involved in distributed multimedia systems. Considering ATM network, ATM adapter cannot control the end-to-end connection satisfying the user's QoS. This paper describes the new concept of a QoS prediction management system in the distributed network and the configuration of it's QoS prediction management architecture and also discusses it's algorithm.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.267-270
• /
• 1997

As an approach to develope a control system with robustness in changing control environment conditions, this paper will propose a robot manipulator control system using multilayer neural network and immune algorithm. The proposed immune algorithm which has the characteristics of immune system such as distributed and anomaly detection, probabilistic detection, learning and memory, consists of the innate immune algorithm and the adaptive immune algorithm. We will demonstrate the effectiveness of the proposed control system with simulations of a 2-link robot manipulator.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.182-186
• /
• 1997

This paper presents a mathematical approach to implementing distributed optimal power flow (OPF), wherein a regional decomposition technique is adopted to parallelize the OPF. Three mathematical decomposition coordination methods are introduced firs to implement the proposed distributed scheme: the Auxiliary Problem Principle (APP), the Predictor-Corrector Proximal Multiplier Method (PCPM), and the Alternating Direction Method (ADM). Then two alternative schemes for modeling distributed OPF are introduced; the Dummy Generator-Dummy Generator (DGDG) scheme and Dummy Generator-Dummy Load (DGDL) scheme. We present the mathematical analyses of the proposed approach, and demonstrate the approach on several test, systems, including IEEE Reliability Test Systems and parts of the ERCOT (Electric Reliability Council of Texas) system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.320-325
• /
• 1995

This study deals with the active vibration control system for an all-clamped rectangular plate with piezoceramic actuators and sensors. A line nonent algorithm (LMA) with the distributed modal sensitivity(DMS) is proposed to reduce the structural vibrations effectively and to select the optimal locations and the optimal directions (skewed angles) of uniform piezoelectric actuators or sensors. Experimental results show that eachmode can attenuated byabout 10 .approx. 13 dB in case a piezoelectric actuator generate the psuedo-random disturbances that excite the plate modes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.168-168
• /
• 2000

In this paper, a boiler control system for thermal power plant is configured. The boiler control system for thermal power plant is largely composed of an ABC(Automatic Boiler Control) system and a MBC(Mill Burner Control) system. ABC system controls analog process values, so almost all analog control logic is dealt with in ABC system. On the other hand, MBC system relates to sequence control logic such as MFT logic, Furnace Purge, Safety related logic. Advanced control systems made from advanced countries deal with an ABC system and MBC system in a distributed control system. In this paper, we adopt a DCS as an ABC system and adopt a PLC system as a MBC system to configure a boiler control system for thermal power plant using domestic control system. Finally the validity of the configured boiler control system is shown via simulation using digital simulator for boiler system in thermal power plant.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.216-218
• /
• 1995

This paper presents the concepts developed to propose Distributed Control System(DCS). To achieve adequate satisfaction under various conditions, the DCS should be designed from two points of view of functions distributions and performance planning. Performance evaluation criteria can be specified by the response time between units and the utilization of each unit. One has to also consider the ease and the cost of installation, maintenance, repair. Based on these characteristics, different system configuration can be evaluated and compared through results about evaluation criteria in order lo select the best DCS for particular process. The results, in abbreviated form, of the simulation DCS controlling a CAL(Continuos Annealing Line) plant of iron process ate presented.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2419-2422
• /
• 2000

A distributed real-time system that is being used now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access methed and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translater, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.459-467
• /
• 2012

In this paper, a grid connected microgrid with multiple inverter-based distributed generators (DGs) is considered. DG in FFC mode regulates the microgrid as a controllable load from the utility point of view as long as its output is within the capacity limit. The transition mode causes a change in frequency of microgrid due to the loss of power transferred between main grid and microgrid. Frequency deviation from the nominal value can exceed the limit if the loss of power is large enough. This paper presents a coordinated control method for inverter-based DGs so that the microgrid is always regulated as a constant load from the utility viewpoint during grid connected mode, and the frequency deviation in the transition mode is minimized. DGs can share the load by changing their control modes between UPC and FFC and stabilize microgrid during transition.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.609-611
• /
• 1998

In this paper, a method for the efficient implementation of the control network for a distributed control system (DCS) is proposed. The proposed method focuses on the real-time property and the low networking cost of a control network. It suggests a new network architecture combining the IEEE 802.4 token-passing bus access method and the IEEE 802.3 physical layer. For this purpose, a new interface, a physical layer service translator is introduced. A control network using this method is implemented and applied to a DCS.