• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.100-108
• /
• 2014

In this paper, an idea of a network type distributed control of a system with inner loop control structure will be considered. Generally, in case of a control system with inner loop control structure, it is not easy to implement circuits and programming. Using network type distributed control structure, it will show how it is better than before. CAN(Controller Area Network) protocol which has been known that it has a high reliability on the signal in the various network protocols is used. Also, Arago's Disk System which has a inner loop control stucture is made to validate effectiveness of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.36-44
• /
• 2013

This paper is written for the development and application of boiler fuel control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. Fuel control algorithm has the upper algorithm and it is boiler master control algorithm that controls the fuel, feed water, air by generation output demand. Generation output demand by power load influences fuel control. Because fuel can not be supplied fast to the furnace of boiler, fuel control algorithm was designed adequately to control the steam temperature and to prevent the explosion of boiler. This control algorithms were coded to the control programs of distributed control systems which were developed domestically for the first time. Simulator for coal-fired power plant was used in the test step. After all of distributed control systems were connected to the simulator, the tests of the actual power plant were performed successfully. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.269-276
• /
• 2004

There has been considerable activity in recent years in developing timing analysis algorithms for distributed real-time control systems. However, it is difficult for control engineers to analyze the timing behavior of distributed real-time control systems because the algorithms was developed in a software engineer's position and the calculation of the algorithm is very complex. Therefore, there is a need to develop a timing analysis tool, which can handle the calculation complexity of the timing analysis algorithms in order to help control engineers easily analyze or develop the distributed real-time control systems. In this paper, an interactive timing analysis tool, called RAT (Response-time Analysis Tool), is introduced. RAT can perform the schedulability analysis for development of distributed real-time control systems. The schedulability analysis can verify whether all real-time tasks and messages in a system will be completed by their deadlines in the system design phase. Furthermore, from the viewpoint of end-to-end scheduling, RAT can perform the schedulability analysis for series of tasks and messages in a precedence relationship.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.404-411
• /
• 2004

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with CPLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.784-793
• /
• 2022

Grid-connected distributed power generation has been widely used in green energy generation. However, due to the distributed characteristics, distributed power generation is difficult to be dynamically allocated and monitored in the electrical control process. In order to solve this problem, this research combined the Internet of Things (IoT) with the automatic control system of electrical engineering to improve the control strategy of the power grid inverter according to the characteristics of the IoT system. In the research, a connection system of the power grid inverter and the IoT controller were designed, and the application effect was tested by simulation experiments. The results showed that the power grid inverter had strong tracking control ability for current and power control. Meanwhile, the electrical control system of the IoT could independently and dynamically control the three-phase current and power. The given value was reached within 50 ms after the step signal was input, which could protect the power grid from being affected by the current. The overall system could realize effective control, dynamic control and protective control.

• 전기의세계
• /
• v.19 no.2
• /
• pp.21-23
• /
• 1970

Necessary conditions of optimal distributed parameter control systems, Hamiltons coanonical equations, welerstress condition, transversality condition and boundary condition are obtained, when the control function is constrained and the performance index takes on the general form. Also it is concluded that the lumped parameter system is the special case of the distributed parameter system.

• International Journal of Automotive Technology
• /
• v.3 no.3
• /
• pp.89-94
• /
• 2002

This paper presents an architecture for distributed control systems and its underlying methodological framework. Ideas and concepts of distributed systems, artificial intelligence, and soft computing are merged into a unique architecture to provide cooperation, flexibility, and adaptability required by knowledge processing in intelligent control systems. The distinguished features of the architecture include a local problem solving capability to handle the specific requirements of each part of the system, an evolutionary case-based mechanism to improve performance and optimize controls, the use of linguistic variables as means for information aggregation, and fuzzy set theory to provide local control. A distributed traffic control system application is discussed to provide the details of the architecture, and to emphasize its usefulness. The performance of the distributed control system is compared with conventional control approaches under a variety of traffic situations.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.143-151
• /
• 2008

This paper presents the operation of Fuel Cell Distributed Generation(FCDG) systems in distribution systems. Hence, modeling, controller design, and simulation study of a Solid Oxide Fuel Cell(SOFC) distributed generation(DG) system are investigated. The physical model of the fuel cell stack and dynamic models of power conditioning units are described. Then, suitable control architecture based on fuzzy logic and the neural network for the overall system is presented in order to activate power control and power quality improvement. A MATLAB/Simulink simulation model is developed for the SOFC DG system by combining the individual component models and the controllers designed for the power conditioning units. Simulation results are given to show the overall system performance including active power control and voltage regulation capability of the distribution system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In the industrial field nowadays the information that needs to be handled arc increasing and requires faster speed in contrast with PLC(Programmable Logic Controller) or DCS(Distributed Control System) based control systems these days. The work environment these days are mostly based on PC, so the control systems are wanted in PC. At Fieldbus used automated systems performing distributed process control by PC performs and combines into one system in order to maximize the increase of productivity, lower the expense, planning constructing and maintaining the reliance of automation. These latest automation systems unites process, makes distributed control process able, and can control and supervise at remote PC.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.711-721
• /
• 2013

Optimal operation of a combined sewer network with distributed storage facilities aims to use the whole retention capacity of all reservoirs efficiently before overflows take place somewhere in the considered network system. An efficient real-time network control (RTNC) strategy has been emerging as an attractive approach for reducing substantially the overflows from a sewer network compared to the conventional fixed or manually adjusted gate setting method, but the related concrete framework for RTC development has not been throughly introduced so far. The main goal of this study is to give a detailed description of the RTNC systems via reviewing several guidelines published abroad, and finally to suggest methods for the proper application of RTNC on distributed storage facilities. Especially, this study is focused on emphasizing the importance of hierarchical structure of RTNC system that consists of three control layers (management, global control and local control). Further, with regard to the global control layer which is responsible for the central overall network control, the wide-ranging details of two components (adaption and optimization layers) are also presented. This study can provide the valuable basis for the RTNC implementation in the particular sewer network with distributed multiple storage facilities.