• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.684-688
• /
• 2008

레이더 강우와 관련한 대부분의 연구나 실무적용이 제한을 받는 이유는 레이더 반사도 등의 원시자료를 획득하기가 어려울 뿐만 아니라 이를 처리하여 수문해석에 적용하는 과정이 간단하지 않기 때문이다. 이를 해결하기 위하여 다음과 같은 내용을 연구하였다. (1) 레이더 영상자료를 실용적으로 활용하기 위한 '레이더 영상 디지털 변환법(RAIDOM)'을 연구 개발하였다. 또한 오프라인상에서도 기상청 레이더 합성 CAPPI 이미지 자료를 디지털 강우자료로 직접 변환할 수 있는 방법을 제시하였다. 이러한 기술은 앞으로 레이더 강우 연구와 레이더 강우의 활용성을 넓히는데 크게 기여할 것으로 기대된다. (2) RAIDOM 레이더 강우와 연계한 분포형 강우유출모형을 구축하였다. 본 연구에서는 DEM, 토지피복도, 토양도로부터 분포형 강우-유출모형의 매개변수를 산정하는 방법을 상세히 연구하여 제시하였다. 이러한 연구결과는 앞으로 분포형 강우유출모형에 대한 연구와 활용성을 넓히는데 기여할 것으로 기대된다. (3) 주요 관측 레이더 호우사상을 이용하여 RAIDOM 강우와 구축된 분포형 모형의 적용성을 검증하였다. 이를 위하여 먼저 강우유출자료가 체계적으로 관리되고 있는 평창강 국제수문개발계획(IHP) 시범유역의 자료를 이용하여 모형의 매개변수 보정을 수행하였다. 강우 전 하천의 기저유량과 유역의 초기함수조건을 제외한 나머지 매개변수는 유역특성을 나타내는 인자들이므로 모든 강우사상에 대하여 일정한 것으로 가정하여 매개변수 보정을 수행하였다. 6개 주요 호우사상에 대하여 보정한 결과 4개의 호우사상에 대하여 강우-유출과정을 거의 완벽하게 재현하였으며, 2개의 호우사상에 대해서는 수문곡선의 상승과 하강은 비교적 일치하나 첨두부에서 다소차이가 발생하였다. (4) 보정된 분포형 모형을 2006년 7월에 발생한 국지성 집중호우와 한강유역 중상류지역에 걸쳐 큰 홍수량을 발생시킨 2개의 호우사상에 대하여 레이더 강우자료를 적용하여 검토하였다. 검토결과 임진강유역 3개 수위관측소와 우이천수위관측소 및 중랑교수위관측소에서 모의된 홍수수문곡선은 실측치와 잘 일치하는 것으로 나타나 본 연구에서 제시한 RAIDOM과 이를 적용한 분포형 모형이 강우유출 모의를 위하여 활용될 수 있음을 보여주었다. 앞으로 태풍에 수반된 강우와 장마전선 등을 포함한 다양한 유형의 여러 가지 강우에 대한 적용을 통하여 모형의 검증과 보완을 수행하여 RAIDOM 레이더 강우와 분포형 강우유출모형을 연계한 홍수 예보 시스템으로 발전시켜 나갈 예정이다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.146-155
• /
• 2006

A handful of previous studies have attempted to integrate socioeconomic data and remotely sensed data for urban quality of life assessment with their spatial dimension in a zonal unit. However, such a zone-based approach not only has the unrealistic assumption that all attributes of a zone are uniformly spatially distributed throughout the zone, but also has resulted in serious methodological difficulties such as the modifiable areal unit problem and the incompatibility problem with environmental data. An alternative to the zone-based approach can be a pixel-based approach which gets its spatial dimension through a pixel. This paper proposes a pixel-based approach to linking remotely sensed data with socioeconomic data in GIS for urban quality of life assessment. The pixel-based approach uses dasymetric mapping and spatial interpolation to spatially disaggregate socioeconomic data and integrates remotely sensed data with spatially disaggregated socioeconomic data for the quality of life assessment. This approach was implemented and compared with a zone-based approach using a case study of Fulton County, Georgia. Results indicate that the pixel-based approach allows for the calculation of a microscale indicator in the urban quality of life assessment and facilitates efficient data integration and visualization in the assessment although it costs an intermediate step with more processing time such as the disaggregation of zonal data. The results also demonstrate that the pixel-based approach opens up the potential for the development of new database and increased analytical capabilities in urban analysis.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2000

In this paper, a new digital watermarking algorithm using wavelet transform is proposed. Wavelet transform is widely used for image processing, because of its multiresolution characteristic which conforms to the principles of the human visual system(HVS). It is also very efficient for localizing images in the spatial and frequency domain. Since wavelet coefficients can be characterized by the gaussian distribution, the proposed algorithm uses a gaussian distributed random vector as the watermark in order to achieve invisibility and robustness. After the original image is transformed using DWT(Discrete Wavelet Transform), the coefficients of all subbands including LL subband are utilized to equally embed the watermark to the whole image. To select perceptually significant coefficients for each subband, we use level-adaptive thresholding. The watermark is embedded to the selected coeffocoents, using different scale factors according to the wavelet characteristics. In the process of watermark detection, the similarity between the original watermark and the extracted watermark is calculated by using vector projection method. We analyze the performance of the proposed algorithm, compared with other transform-domain watermarking methods. The experimental results tested on various images show that the proposed watermark is less visible to human eyes and more robust to image compressions, image processings, geometric transformations and various noises, than the existing methods.

• Korean Journal of Ichthyology
• /
• v.7 no.1
• /
• pp.64-70
• /
• 1995

Vertical distribution of eggs and larvae of Maurolicus muelleri were studied in the south-eastern waters of Korea during 1985 and 1986. Samples were collected vertically at three different layers, 0~30 m, 30~50m and 50~100m. The densities of egg and larva were high in August. Eggs and zooplankton were abundant around the thermocline in the temperature range of $10{\sim}15^{\circ}C$ at the layers of 50 m depth in 1985, and 30~100m depth in 1986. Eggs in the cleavage stage were abundant at the layer of 50~100m depth, while those of processing embryonic body formation were tended to concentrate at the layer of 30~50m depth. The vertical distribution of each developmental stage differed according to sampling time. They were distributed uniformly at water column from 30 m to 100m depth in the midnight, but concentrated at the layer from 30 m to 50 m from dawn to sunset. Before and after midnight, eggs in the cleavage stage were most abundant. It was assumed that M. muelleri spawned at the layer of 50~100m depth around the midnight, and the eggs ascended to the layer of 30~50m depth with development.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.129-148
• /
• 2017

Conventional exhibition management information systems recommend tourist attractions that are close to the place in which an exhibition is held. Some recommended attractions by the location-based recommendation could be meaningless when nothing is related to the exhibition's topic. Our goal is to recommend attractions that are related to the content presented in the exhibition, which can be coined as content-based recommendation. Even though human exhibition curators can do this, the quality is limited to their manual task and knowledge. We propose an automatic way of discovering attractions relevant to an exhibition of interests. Language resources are incorporated to discover attractions that are more meaningful. Because a typical single machine is unable to deal with such large-scale language resources efficiently, we implemented the algorithm on top of Apache Spark, which is a well-known distributed computing framework. As a user interface prototype, a web-based system is implemented that provides users with a list of relevant attractions when users are browsing exhibition information, available at http://bike.snu.ac.kr/WARP. We carried out a case study based on Korean Tourism Organization Linked Open Data with Korean Wikipedia as a language resource. Experimental results are demonstrated to show the efficiency and effectiveness of the proposed system. The effectiveness was evaluated against well-known exhibitions. It is expected that the proposed approach will contribute to the development of both exhibition and tourist industries by motivating exhibition visitors to become active tourists.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.316-329
• /
• 2008

Recently the increased attention pays on the processing of multiple, relatively low quantity, high value-added products resulted in adoption of batch process in the chemical process industry such as pharmaceuticals, polymers, bio-chemicals and foods. As there are more possibilities of the improvement of operations in batch process than continuous processes, a lot of effort has been made to enhance the productivity and operability of batch processes. But the chemical process industry faces a range of uncertainties factors such as demands for products, prices of product, lead time for the supply of raw materials and in the production, and the distribution of product. And global competition has made it imperative for the process industries to manage their supply chains optimally. Supply chain management aims to integrate plants with their supplier and customers so that they can be managed as a single entity and coordinate all input/output flows (of materials, information) so that products are produced and distributed in the right quantities, to the right locations, and at the right time.The objective of this study is to solve the purchase, distribution, production planning and scheduling problem, which minimizes the total costs of production, inventory, and transportation under uncertainty. And development of SCM model in chemical industry including batch mode operations. Through that, the enterprise can respond to uncertainty. Also integrated process optimal planning and scheduling model for manufacturing supply chain. The result shows that, the advantage of supply chain integration are quality matters seen by customers and suppliers, order schedules, flexibility, cost reduction, and increase in sales and profits. Also, an integration of supply chain (production and distribution system) generates significant savings by trading off the costs associated with the whole, rather than minimizing supply chain costs separately.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2007

A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.235-242
• /
• 2002

We propose an advanced transaction scheduling protocol for concurrency control of multilevel secure databases in wireless mobile network environment. Wireless communication is characterized by frequent spurious disconnections. So short-lived transaction must quickly access database without any delay by long-lived one. We adapted two-phase locking protocol, namely traditional syntax-oriented serializability notions, to multilevel secure databases in wireless mobile network environment. Altruistic locking, as an advanced protocol, has attempted to reduce delay effect associated with lock release moment by use of the idea of donation. An improved form of a1truism has also been deployed for extended a1truistic locking. This is in a way that scope of data to he early released is enlarged to include even data initially not intended to be donated. Our protocol is based on extended altruistic locking, but a new method, namely bi-directional donation locking for multilevel secure databases (MLBiDL), is additionally used in order to satisfy security requirements and concurrency. We showed the Simulation experiments that MLBiDL outperforms the other locking protocols in terms of the degree of throughput and average waiting time.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.