• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.191-197
• /
• 2015

본 연구에서는 분산 메모리시스템에서의 압력 방정식의 병렬해법을 위하여 MPI(Message Passing Interface)와 하이브리드 병렬기법을 사용하였다. 두 모델은 영역분할 기법을 활용하며, 하이브리드 기법은 성능이 양호한 두 가지 영역분할에 대해 수행하였다. 두 병렬기법의 성능을 비교하기 위해서 다양한 문제 크기에 대해 최대 96개의 쓰레드를 사용하여 속도향상을 측정하였다. 병렬 성능은 캐쉬 메모리에 따른 문제의 크기 및 MPI 통신, OpenMP 지시어의 부하에 대해 영향을 받음을 확인하였다. 문제의 크기가 작은 경우에는 쓰레드가 증가할수록 MPI 통신 및 OpenMP 지시어 부하에 대한 비율이 상대적으로 크기 때문에 병렬 성능이 좋지 않으며, MPI 통신 부하보다는 OpenMP 지시어 부하가 상대적으로 크므로 MPI 병렬 기법의 병렬 성능이 더 우수하다. 문제의 크기가 큰 경우에는 캐쉬 메모리의 활용도가 높고 MPI 통신 및 OpenMP 지시어 부하에 대한 비율이 낮아 병렬 성능이 좋으며, OpenMP 지시어보다 MPI 통신에 의한 부하가 더 지배적이어서 하이브리드 병렬 성능이 MPI 병렬 성능보다 더 양호하다.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.143-153
• /
• 2005

J.Y. CHOI,S. J. KIM, E. L. LEE. Change of plantar pressure Distribution of Open Stance during Forehand Strke in Tennis. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, PP. 143-153, 2005. Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and close stance and it is very important to know the patterns of plantar pressure distribution for the better understanding of forehand stroke. Therefore, the purpose of this study was to investigate the change of plantar pressure distribution in open stance during forehand stroke in tennis. Three high school tennis players were recruited for the study and required to perform forehand stroke five consecutive trials in the condition of open stance. The forehand strokes were filmed with two digital video cameras and measured with pedar system for plantar pressure. The plantar regions under the foot were divided into 3 regions, which were forefoot, midfoot, and rear foot. In conclusion, The plantar pressure of open stance during forehand stroke was distributed more largely to the right foot. The plantar pressure of open stance during forehand stroke was distributed more weight loads on forefoot of right than heel of right

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

• 한국컴퓨터정보학회논문지
• /
• 제3권4호
• /
• pp.110-119
• /
• 1998

본 논문은 개방형 분산 Computing system에서 여러 분산 어플리케이션 프로그래머들에게 범용 암호 서비스 제공을 위한 C-API(Cryptographic-Application Program Interface) Mechanism개발에 대하여 설명한다. C-API Mechanism는 응용 프로그래머에게 공통적으로 사용 할 수 있는 암호 알고리즘 및 인터페이스를 제공함으로써 프로그래머가 암호 알고리즘을 알지 못하여도 분산 어플리케이션이 보안 서비스를 제공할 수 있다. 따라서,본 논문에서는 다양한 응용 환경 또는 시스템 하부구조에 독립적으로 사용될 수 있는 공용암호 서비스 구조를 설계하여 공통적으로 이용할 수 있도록 하였다. 이러한 구조는 응용 프로그래머에게 각종 암호화 관련서비스 및 키관리 서비스를 응용 프로그램과 운영체제의 제약없이 사용할 수 있는 장점이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.52.4-52
• /
• 2001

In this paper we propose a framework of an open architectured manufacturing system base on CORBA middleware. The manufacturing system consists of four configurable software modules 9mchine control module, database module, monitoring module, and operation module). Each module is distributed through the network and integrated with CORBA middleware technology. CORBA Characteristics including independence from programming languages, computing platforms and networking protocols makes us to easily develop new applications and to effectively integrate new module into existing distributed systems. The CORBA program used in this study is The ACE ORB (TAO) developed by the laboratory in Washington University.

• Journal of Information Processing Systems
• /
• 제18권1호
• /
• pp.159-172
• /
• 2022

The role of the interconnect network, which connects computing nodes to each other, is important in high-performance computing (HPC) systems. In recent years, the peripheral component interconnect express (PCIe) has become a promising interface as an interconnection network for high-performance and cost-effective HPC systems having the features of non-transparent bridge (NTB) technologies. OpenSHMEM is a programming model for distributed shared memory that supports a partitioned global address space (PGAS). Currently, little work has been done to develop the OpenSHMEM library for PCIe-interconnected HPC systems. This paper introduces a prototype implementation of the OpenSHMEM library through a switchless interconnect network using PCIe NTB to provide a PGAS programming model. In particular, multi-interrupt, multi-thread-based data transfer over the OpenSHMEM shared memory model is applied at the implementation level to reduce the latency and increase the throughput of the switchless ring network system. The implemented OpenSHMEM programming model over the PCIe NTB switchless interconnection network provides a feasible, cost-effective HPC system with a PGAS programming model.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.28-37
• /
• 1996

Syntax notation one (ASN.1) defined by ITU-T and ISO, is a formal abstrct specification language which has been widely used in international standards specifiation to inteconnect distributed open systems. It si necessary to have well defined encoder/decoder modules which taranslate ASN.1 datum to BER octets stream to interconnect distributed open systems. In this paper, we designed and implemented a new ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which atutomatically translates and ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which automatically translates an ASN.1 specification into C-language BER encoders and decoders with simple and neat I/F for the defined ASN.1 data types, and enhanced BER (basic encoding rules)encoding/decoding libraries, called HY(hanyang)BER library, and useful utility functions. And this paper discusses HYASNC compiler, HY BER runtime library's design and implementation principles, and also evaluates the perfomrance of HY BER library and the interoperability with other ASN.1 compilers.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2008년도 제38차 하계학술발표논문집 16권1호
• /
• pp.225-230
• /
• 2008

방대한 양의 분산 멀티미디어 자원에 대한 액세스를 제공하는 하이퍼미디어 기능을 사용한 IPTV의 성공은 영상 정보 관리 시스템의 구성요소로써 IPTV의 영상 정보 검색의 효율성 제고 및 성능향상을 제공한다. 그러나 본 논문에서는 현존하는 하이퍼미디어 시스템에 거의 없는 필요한 모든 기능을 제공하는 방법을 보였다. 개방형 분산 멀티미디어 자원 통합 모델의 모든 기능을 제공해주기 위하여 개방형 분산 하이퍼미디어 시스템 타입의 IPTV 정보 계층 구조와 양질의 서비스 계층을 통하여 융통성 있고 확장 가능한 분산 멀티미디어 정보 시스템이 개발될 수 있는 범위 내의 모듈러 프레임워크(modular framework)로써 행동하도록 설계되었다. 개방형 분산 하이퍼미디어 프레임워크 모델은 QoS 제공을 위하여 이질적인 분산 멀티미디어 자원 통합의 하이퍼미디어 프레임워크 모델을 하이퍼미디어 세션과 함께 제시함으로써 넓게 분산되어 있는 자원에 대하여 투명하게 접근할 수 있는 방법을 제시하였다.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.186-193
• /
• 2017

KOSMOS is Korea Open Source MOtion System which is developed based on general purpose hardware and open source software. It is aiming at IEC 61131-3 standard. Real-time ethernet has several advantages for motion control system and distributed control system. So, considering this advantages, KOSMOS has the network interface made up of Real-time ethernet, EtherCAT. In this paper, we explain the KOSMOS platform, the performance for real-time task and show the real case applying KOSMOS platform in manipulator control system.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.808-813
• /
• 2003

Maintaining agility and responsiveness m designing and manufacturing activities are the key issues for manufacturing companies to cope with global competition. Distributed design and control systems are regarded as an efficient solution for agility and responsiveness. However, distributed nature of a manufacturing system complicates production activities such as design, simulation, scheduling, and execution control. Especially, existing simulation systems have limited external integration capabilities, which make it difficult to implement complex control mechanisms for the distributed manufacturing systems. Moreover, integration and coupling of heterogeneous components and models are commonly required for the simulation of complex distributed systems. In this paper, a collaborative and adaptive simulation architecture is proposed as an open framework for simulation and analysis of the distributed manufacturing enterprises. By incorporating agents with their distributed characteristics of autonomy, intelligence, and goal-driven behavior, the proposed agent-based simulation architecture can be easily adapted to support the agile and distributed manufacturing systems. The architecture supports the coordination and cooperation relations, and provides a communication middleware among the participants in simulation.