• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.70.6-70
• /
• 2001

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires communication standard and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the distributed fire alarm signaling system and a new intelligent control modules with LonTalk Protocol. Newly proposed additions to Lonworks network make it very well suited for integration fire systems with other building automation systems. Additionally, it is very important that best design practices ...

• The KIPS Transactions:PartA
• /
• v.19A no.4
• /
• pp.181-186
• /
• 2012

The distributed measurement and control system require technology to solve complex synchronization problem among distributed devices. It can be solved by using IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems to synchronize real-time clocks incorporated within each component of the system. In this paper, we implemented the IEEE 1588v2 PTP emulator on BlueScope BL6000A using a delay request-response mechanism to measure clock synchronization.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.38-47
• /
• 2003

Distributed problem solving is the cooperative solution of problem by a decentralized and loosely couped collection of knowledge-sources (KS's), located in a number of distinct processor nodes. The contract net protocol has been developed to specify problem-solving communication and control for nodes in a distributed problem solver. Task distribution is affected by a negotiation process, a discussion carried on between nodes with tasks to be executed and nodes that may be able to execute tasks In this paper, we present the coordination method among distributed intrusion detection system and firewall by the contract net protocol. The method enhances the intrusion detection performance and provides the communication methods. To mode IDS and firewall, security models hue been hierarchically constructed based on the DEVS (Discrete Event system Specification) formalism. Each ID agent cooperates through the contract net protocol for detecting intrusions. The IDS which detects the intrusion informs to firewall, so the harmful network traffic is blocked. If an agent detects infusions, the agent transfers attacker's information to a firewall. Using this mechanism attacker's packets detected by In can be prevented from damaging the network.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.100-108
• /
• 2014

In this paper, an idea of a network type distributed control of a system with inner loop control structure will be considered. Generally, in case of a control system with inner loop control structure, it is not easy to implement circuits and programming. Using network type distributed control structure, it will show how it is better than before. CAN(Controller Area Network) protocol which has been known that it has a high reliability on the signal in the various network protocols is used. Also, Arago's Disk System which has a inner loop control stucture is made to validate effectiveness of the proposed method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.157-162
• /
• 2001

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires communication standard and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the distributed fire alarm signaling system and a new intelligent control modules with LonTalk protocol. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation systems. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate Integrated building systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1127-1131
• /
• 2005

One of problems in industries is an installation for an automation system device such sensor, transducer, controller, and so on those are located in different areas. Such problem makes a difficulty for maintenance and installation. The aim of this research attempts to design a high performance controller with remote devices. One attractive is to group near devices in near place together to centralizes control. This paper presents network device groups distributed through digital and analog Remote Terminal Unit (RTUs). Such devices are centralized by computer or PLC control and communicated with similar protocol through serial bus. Our scheme, there are many advantages such as, saving both time and cost,convenience compared to other ways.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.241-252
• /
• 2011

A simulated network protocol provides the capability of distributed simulation to a generic simulator. Through this, full coverage of management of data and service handling among separated simulators is achieved. The distributed simulation environment is much more conducive to handling simulation load balancing and hazard treatment than a standalone computer. According to the simulated network protocol, one simulator takes on the role of server and the other simulators take on the role of client, and client is controlled by server. The purpose of the simulated network protocol is to seamlessly connect multiple simulator instances into a single simulation environment. This paper presents the development of a simulated network (simNetwork) that provides the capability of distributed simulation to a generic simulator (GenSim), which is a software simulator of satellites that has been developed by the Korea Aerospace Research Institute since 2010, to use as a flight software validation bench for future satellite development.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2016

This paper considers WiMedia UWB network based wireless ship area network (WSAN) so as to support high-quality multimedia video data services and important shipboard control data. In this paper, prioritized contention access (PCA) and distributed reservation protocol (DRP) based on WiMedia UWB (ECMA-368) MAC protocols are combined and proposed to support mixed high-quality video traffic and shipboard control data traffic applying varying DRP and PCA data periods according to channel condition and link parameter ptimization. It is shown that the proposed dynmaic channel allocation of WiMedia UWB MAC protocol can provide reliable mixed video and shipboard control data traffic as well.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.2
• /
• pp.83-90
• /
• 2020

A protocol HMNR, was proposed to utilize control information of every other process piggybacked on each sent message for minimizing the number of forced checkpoints. Then, an improved protocol, called Lazy-HMNR, was presented to lower the possibility of taking forced checkpoints incurred by the asymmetry between checkpointing frequencies of processes. Despite these two different minimization techniques, if the high message interaction traffic occurs, Lazy-HMNR may considerably lower the probability of knowing whether there occurs no Z-cycle due to its shortcomings. Also, we recognize that no previous work has smart procedures to be able to utilize network infrastructures for highly decreasing the number of forced checkpoints with dependency information carried on every application message. We introduce a novel Lazy-HMNR protocol for group communication-based distributed computing systems to cut back the number of forced checkpoints in a more effective manner. Our simulation outcomes showed that the proposed protocol may highly lessen the frequency of forced checkpoints by comparison to Lazy-HMNR.