• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.52-60
• /
• 2005

Generally, a voltage difference or voltage distortion exists between the reference voltage and the practical voltage applied to a motor in a pulse width modulated(PWM) voltage source inverter(VSI). This voltage distortion varies with the operating conditions such as the temperature, DC link voltage, and phase current level. Also the voltage distortion affects the machine current distortion, torque pulsations, and control performance. In this paper, the voltage distortion in a PWM VSI is analyzed and a new on-line estimation method based on the model reference adaptive system(MRAS) is proposed to compensate the time varying voltage distortion, while considering the parameter variations for a permanent magnet synchronous motor (PMSM). The simulation and experimental results show the effectiveness of the proposed voltage difference observer and the compensation method.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.289-296
• /
• 1999

In this paper, an improved fractal color image decoding method using the data dependence parts and the vector distortion measure is proposed. The vector distortion measure exploits the correlation between different color components. The pixel in RGB color space can be considered as a 30dimensional vector with elements of RGB components. The root mean square error(rms) in RGB color for similarity measure of two blocks R and R' was used. We assume that various parameter necessary in image decoding are stored in the transform table. If the parameter is referenced in decoding image, then decoding is performed by the recursive decoding method. If the parameter is not referenced in decoding image, then the parameters recognize as the data dependence parts and store its in the memory. Non-referenced parts can be decoded only one time, because its domain informations exist in the decoded parts by the recursive decoding method. Non-referenced parts are defined the data dependence parts. Image decoding method using data dependence classifies referenced parts and non-referenced parts using information of transform table. And the proposed method can be decoded only one time for R region decoding speed than Zhang & Po's method, since it is decreased the computational numbers by execution iterated contractive transformations for the referenced range only.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.315-322
• /
• 2002

In this paper, a new temporal decomposition method is proposed. which takes into consideration not only spectral distortion but also bit rates. The interpolation functions, which are one of necessary parameters for temporal decomposition, are obtained from the training speech corpus. Since the interval between the two targets uniquely defines the interpolation function, the interpolation can be represented without additional information. The locations of the targets are determined by minimizing the bit rates while the maximum spectral distortion maintains below a given threshold. The proposed method has been applied to compressing the LSP coefficients which are widely used as a spectral parameter. The results of the simulation show that an average spectral distortion of about 1.4 dB can be achieved at an average bit rate of about 8 bits/Frame.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.431-445
• /
• 2003

In this paper, we experimentally investigated the precision of 3D positioning using 4S-Van images in photograrmmetric perspective. The 3D calibration target was built over building facade outside and was captured separately by two CCD cameras installed in 4S-Van. After then, we determined the interior orientation parameter for each CCD camera through self-calibration technique. With the interior orientation parameter computed, the bundle adjustment was performed to obtain the exterior orientation parameters simultaneously for two CCD cameras using calibration target image and object coordinates. The reverse lens distortion coefficients were computed and acquired by least squares method so as to introduce lens distortion into epipolar line. It was shown that the reverse lens distortion coefficients could transform image coordinates into lens distorted image coordinates within about 0.5 pixel. The proposed semi-automatic matching scheme incorporated with lens distorted epipolar line was implemented with scene images captured by 4S-Van in moving. The experimental results showed that the precision of 3D positioning from 4S-Van images in photograrmmetric perspective is within 2cm in the range of 20m from the camera.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2010-2024
• /
• 1998

In video coding, it is important to improve the average picture quality as well as to maintain cosistent picture quality between consecutive pictures. In this paper, we propose a distortion-rate estimation method for MPEG-2 video and a forward rate control method, using the proposed estimation result, to be able to obtain the improved and consistent picture quality of CBR (Constant Bit Rate) encoded MPEG-2 video. The proposed distortion-rate estimation enable us to predict the distortion and the bits generated from an encoded picture at a given quantization step size and vice versa. The most attactive features of proposed distortion-rate estimation are its accuracy and low computational complexity enough to be applied to the practical video coding. In addition, the proposed rate control first determined a quantization parameter per frame by following procedure: distortion-rate estimation, target bit allocation, distortion constraint and VBV(Video Buffer Verification) constraint. And then this quantization parameter is applied to the encoding so that improved and consisten picture quality can be obtained. Furthermore the proposed rate control method can solve the error propagation problem caused by scene change or anchor picture degradation by using the B-picture skipping and the guarantee of the minimum bit allocation for the anchor picture. Experimental results, comparing the proposed forward rate control method with TM5 method, show that the proposed method makes more improed and consistent picture quality than TM5.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.268-271
• /
• 2014

Conventional forward error correction (FEC) code rate decision schemes using analytical source coding distortion model and channel-induced distortion model are usually complex, and require the typical process of model parameter training which involves potentially high computational complexity and implementation cost. To avoid the complex modeling procedure, we propose a simple but accurate joint source-channel distortion model to estimate channel loss threshold set for optimal FEC code rate decision.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.111-114
• /
• 1992

Ordering phenomena were observed for Zn and Ta cations of $Ba(Zn_{1/3}Ta_{2/3})O_3$ under particular heat treatments, followed by a considerable lattice distortion. This lattice distortion was measured by X-ray powder diffraction with a precision of higher than 1/10,000. From this investigation, a significant lattice distortion occurred within 30 min. of sintering at $1350^{\circ}C$, and it was increased with sintering time.

• Journal of Information Processing Systems
• /
• v.15 no.5
• /
• pp.1082-1095
• /
• 2019

Camera calibration is an important part of machine vision and close-range photogrammetry. Since current calibration methods fail to obtain ideal internal and external camera parameters with limited computing resources on mobile terminals efficiently, this paper proposes an improved fast camera calibration method for mobile terminals. Based on traditional camera calibration method, the new method introduces two-order radial distortion and tangential distortion models to establish the camera model with nonlinear distortion items. Meanwhile, the nonlinear least square L-M algorithm is used to optimize parameters iteration, the new method can quickly obtain high-precise internal and external camera parameters. The experimental results show that the new method improves the efficiency and precision of camera calibration. Terminals simulation experiment on PC indicates that the time consuming of parameter iteration reduced from 0.220 seconds to 0.063 seconds (0.234 seconds on mobile terminals) and the average reprojection error reduced from 0.25 pixel to 0.15 pixel. Therefore, the new method is an ideal mobile terminals camera calibration method which can expand the application range of 3D reconstruction and close-range photogrammetry technology on mobile terminals.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.104-109
• /
• 2024

In this paper, we propose structures of a socket that can improve signal transmission characteristics compared to the existing silicone rubber socket. A coaxial rubber socket was proposed to improve signal distortion due to electromagnetic interference between signal lines. And an air gap rubber socket was proposed to improve the degradation of reflection characteristics due to high dielectric constant. Using a 3D electromagnetic field simulator, the S-parameter and crosstalk of the three sockets were compared and the signal transmission characteristics were analyzed. In both coaxial rubber socket and the air gap rubber socket, S-parameter and crosstalk were improved compared to the silicone rubber socket. Among them, the air gap rubber socket was the best for S-parameter, and the coaxial rubber socket was the best for crosstalk.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.90-103
• /
• 1999

In this paper, we present an overall algorithm for real-time camera parameter extraction which is one of key elements in implementing virtual studio. The prevailing mechanical methode for tracking cameras have several disadvantage such as the price, calibration with the camera and operability. To overcome these disadvantages we calculate camera parameters directly from the input image using computer-vision technique. When using zoom lenses, it requires real time calculation of lens distortion. But in Tsai algorithm, adopted for camera calibration, it can be calculated through nonlinear optimization in triple parameter space, which usually takes long computation time. We proposed a new method, separating lens distortion parameter from the other two parameters, so that it is reduced to nonlinear optimization in one parameter space, which can be computed fast enough for real time application.