• KSCI Review
• /
• v.2 no.1
• /
• pp.55-67
• /
• 1995

Recently, it is possible to high speed transmission of the non-voiced data, including voice, data, moving image instead of voice only in the past by changing the communication method to digital form from analog owing to the development of semiconductor and computer technology which for information transmission of the remote point. By doing so, we can get the improvement of the noise effect and low cost but the loss of transmission bandwidth. It is necessary to take some method in oreder to reducing the fading which is propotional to transmission bandwidth during the transmission of radio communication channel, especially. When we design the digital communication system, we must considered to the fading effect in order to determination of the transmitting power, modulation /demodulation method, transmission speed, bit error rate. This paper mainly concerns to the method to the channel simulator which descrives the fading effect during the transmission by computer model and digital filter modeling of the radio fading channel by unsing the transmitting and received signal. By taking the inverse of the characteristic of the modeled filter, it is possible to improvement of the communication system by reducing the distortion and inter-symbol interference which occurs in the channel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.71-79
• /
• 1992

In general, the accelerogram of earthquake ground motion or the accelerogram obtained from dynamic tests contain various errors. In these errors of the accelerograms, there are instrumental errors(magnitude and phase distortion) due to the response characteristics of accelerometer and the digitizing error concentrated in low and high frequency components and random errors. Then, these errors may be detrimental to the results of data processing and dynamic analysis. An efficient method which can correct the errors of the accelerogram is proposed in this study. The correction of errors can be accomplished through four steps as followes ; 1) using an interpolation method a data form appropriate to the error correction is prepared, 2) low and high frequency errors of the accelerogram are removed by band-pass filter between prescribed frequency limits, 3) instrumental errors are corrected using dynamic equilibrium equation of the accelerometer, 4) velocity and displacement are obtained by integrating corrected accelerogram. Presently, infinite impulse response(IIR) filter and finite impulse response (FIR) filter are generally used as band-pass filter. In the proposed error correction procedure, the deficiencies of FIR filter and IIR filter are reduced and, using the properties of the differentiation and the integration of Fourier transform, the accuracy of instrument correction and integration is improved.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.49-55
• /
• 2010

Purpose: The purpose of this study was to preliminarily evaluate the influence of diabetes mellitus (DM) on periodontal tissue without establishment of periodontitis. Methods: Seven-week-old db/db mice were used for the diabetic experimental group and systematically healthy mice of the same age were used as controls. After 1 week of acclimatization, the animals were sacrificed for hard and soft tissue evaluation. The pattern of bone destruction was evaluated by stereomicroscope evaluation with alizarin red staining and radiographic evaluation by microscopic computerized tomography images. Histological evaluation was performed with hematoxylin and eosin stain for evaluation of soft tissue changes. Results: In both stereomicroscope evaluation and radiograph image analysis, aggressive form of bone destruction was observed in diabetic animals when compared to the systematically healthy controls. In histological evaluation, apical migration of junctional epithelium with slight inflammatory cell infiltration was observed with disarrangement of connective tissue fibers. Conclusions: Within the limits of this study, diabetic animals presented distortion in periodontal attachment and an aggressive bone loss pattern when compared to the healthy controls, suggesting that DM has an independent effect on periodontal tissue destruction irrespective of the presence or absence of periodontal disease.

• Journal of Arbitration Studies
• /
• v.15 no.3
• /
• pp.233-266
• /
• 2005

The world trading system has been under many changes in recent years. One notably important development is that much attention away from the multilateralism-oriented World Trade Organization towards FTA(Free Trade Agreement). The Free Trade Agreement signed between korea and chile formally have been come effective for free trade in goods and services as from April 1, 2004. During Free Trade Agreement negotiations between both countries. This study aims at presenting the suggestion for the Korea to make the WTO rules and FTA by analyzing The interpretation of FTA under WTO System. It was founded by the investigation of WTO rules, most of the provisions are similar with other FTA, but a little provisions different from other FTA's. It is an appearance from the contracting party's peculiar circumstances such as state of industrial development or future prospect, conditions around international trade. The whole world has entered the new stage of bilateral and multilateral FTA. The essential or new generation or bilateral and multilateral FTA is creating more trade opportunities, promoting all factors, commodity, service, capital, technology and talent freely flow through canceling the trade barriers between FTA, in order to develop together within the regions. It shows that the cooperations transfer form the whole region into FTA. FTA makes not only the free trade smooth ,but also takes place the trade distortion effect. especially as the agriculture has a speciality each country, should it is ignored in negotiation, many reactions will be occurred in the process of fta Therefore Korea needs to deliver the message that Korea's hub is an essential ingredient for an efficient FTA and WTO system in a bilateral and multilateral win-win framework. Consequently Korea should have criterions about the rules of FTA and WTO system for peculiar circumstances of Korean economy and international trade.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.3 s.303
• /
• pp.63-72
• /
• 2005

In this paper, we propose a deformation technique based on Radial Basis Function (RBF) and a blending technique combining the deformed facial component with the original face for a Virtual Aesthetic Surgery (VAS) system. The deformation technique needs the smoothness and the accuracy to deform the fluid facial components and also needs the locality not to affect or distort the rest of the facial components besides the deformation region. To satisfy these deformation characteristics, The VAS System computes the degree of deformation of lattice cells using RBF based on a Free-Form Deformation (FFD) model. The deformation error is compensated by the coefficients of mapping function, which is recursively solved by the Singular Value Decomposition (SVD) technique using SSE (Sum of Squared Error) between the deformed control points and target control points on base curves. The deformed facial component is blended with an original face using a blending ratio that is computed by the Euclidean distance transform. An experimental result shows that the proposed deformation and blending techniques are very efficient in terms of accuracy and distortion.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.474-480
• /
• 2022

Optical phase conjugation is one of techniques capable of compensating for distortion due to chromatic dispersion and nonlinearity, which are essential for long-distance transmission of wavelength division multiplexed (WDM) signal. We proposed and analyzed a way to solve the limitations of this technology through dispersion map with periodic dispersion profile. In the proposed system, optical phase conjugator (OPC) is placed at the position of 1:2 or 2:1 of the entire link, and the dispersion profile of dispersion map has periodic shape in the form of a sine wave or an inverse-sine wave. It was confirmed that the effective compensation of the distorted 960 Gb/s WDM signal was further improved through the proposed periodic dispersion map when the OPC was located at the 1:2 point instead of the 2:1 point of the entire link. In addition, it was found that the maximum RDPS allocated to fiber span should be 1,800 ps/nm or more in order to increase the design flexibility of dispersion-managed link with the proposed periodic dispersion map.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6A
• /
• pp.524-532
• /
• 2002

This paper reports that the Lambert W function applies to a non-iterative design of minimum mean square-error scalar quantizers for a Laplacian source. Specifically, it considers a non-iterative design algorithm for optimum quantizers for a Laplacian source; it finds that the solution of the recursive nonlinear equation in the non-iterative design is elegantly expressed in term of the principal branch of the Lambert W function in a closed form; and it proves that the non-iterative algorithm applies only to exponential or Laplacian sources. The contribution of the paper is in the reduction of the time needed for the design and the increased accuracy in resulting quantization points and thresholds, because the algorithm is non-iterative and the Lambert W function can be evaluated as accurately as desired. Also, numerical results show how optimal quantization distortion converges monotonically to the Panter-Dite constant and help derive an approximation formula for the key parameters of optimum quantizers.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.957-965
• /
• 2018

We study the class $C{\mathcal{V}} ({\Omega})$ of analytic functions f in the unit disk ${\mathbb{D}}=\{z{\in}{\mathbb{C}}$ : ${\mid}z{\mid}$ < 1} of the form $f(z)=z+{\sum}_{n=2}^{\infty}a_nz^n$ satisfying $$1+\frac{zf^{{\prime}{\prime}}(z)}{f^{\prime}(z)}{\in}{\Omega},\;z{\in}{\mathbb{D}}$$, where ${\Omega}$ is a convex and proper subdomain of $\mathbb{C}$ with $1{\in}{\Omega}$. Let ${\phi}_{\Omega}$ be the unique conformal mapping of $\mathbb{D}$ onto ${\Omega}$ with ${\phi}_{\Omega}(0)=1$ and ${\phi}^{\prime}_{\Omega}(0)$ > 0 and $$k_{\Omega}(z)={\displaystyle\smashmargin{2}{\int\nolimits_{0}}^z}{\exp}\({\displaystyle\smashmargin{2}{\int\nolimits_{0}}^t}{\zeta}^{-1}({\phi}_{\Omega}({\zeta})-1)d{\zeta}\)dt$$. Let $z_0,z_1{\in}{\mathbb{D}}$ with $z_0{\neq}z_1$. As the first result in this paper we show that the region of variability $\{{\log}\;f^{\prime}(z_1)-{\log}\;f^{\prime}(z_0)\;:\;f{\in}C{\mathcal{V}}({\Omega})\}$ coincides wth the set $\{{\log}\;k^{\prime}_{\Omega}(z_1z)-{\log}\;k^{\prime}_{\Omega}(z_0z)\;:\;{\mid}z{\mid}{\leq}1\}$. The second result deals with the case when ${\Omega}$ is the right half plane ${\mathbb{H}}=\{{\omega}{\in}{\mathbb{C}}$ : Re ${\omega}$ > 0}. In this case $CV({\Omega})$ is identical with the usual normalized class of convex univalent functions on $\mathbb{D}$. And we derive the sharp upper bound for ${\mid}{\log}\;f^{\prime}(z_1)-{\log}\;f^{\prime}(z_0){\mid}$, $f{\in}C{\mathcal{V}}(\mathbb{H})$. The third result concerns how far two functions in $C{\mathcal{V}}({\Omega})$ are from each other. Furthermore we determine all extremal functions explicitly.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.1
• /
• pp.14-20
• /
• 2005

The control of internal stress is extremely important in electroforming because of the deliberately low adhesion between the electro form and the mandrel. Excessive tensile or compressive stress can cause distortion, separation problem, curling, peeling or separation of electroform prematurely from the mandrel, buckling and blistering. Nickel sulfamate bath has been widely used in electroforming because of its low internal stress and moderate hardness. In this study, real-time stress sensor has been used for stress control in chloride-free nickel sulfamate bath for 400 mm x 300 mm x 500 ㎛ nickel electroform. It was found that compressive stress found at low current density indicated the contamination of electrolyte, which is very useful in procuring buckling and peeling of electroform. No compressive stress is allowed for plate electroform. The real-time stress can also be used for accurate stress control of nickel electroform. The tensile stress was found to be increased slightly with increase in nickel electroform thickness, i.e., from initial 1.47 ksi to 2.02 ksi at 320 ㎛.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.516-524
• /
• 1997

The propagation properties of various pulse signal types(square pulse, Gaussian pulse, trapezoid pulse, RF pulse) on coupled microstrip lines are investigated. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. Frequency-dependent characteristics of coupled microstrip line is obtained using Jansen's approximate equation. The propagation properties of pulse signal on coupled microstrip lines is analyzed regarding to its geometric structure (relative permittivity ${varepsilon}_r$ substrate height h, strip width w of the microstrip line) and pulse width ${\tau}$ of signal pulse. The simulation results show that space between two lines is very significant parameter in pulse distortion in comparison of any other parameters. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.