• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.54-59
• /
• 2010

Ship Blocks are assembled by welding, and among them, welding between large blocks (Pre-erection stage) is used as feature of butt. In this process, local material has a experience of thermal cycle and become finally shrunk. As for inconsistency of shrunk weldments and adjacent regions, ship structure would be deformed locally and globally. Thermal distortion analyses are done for control of these processes, and methodologies capable of ship block size among them are using 2-D shell element in FEM. A shell element takes charge of plate, so it has its thickness which is important for angular distortion by welding. By the way, a butt-welding consists normally of several passes, and weldment thickness are different at each pass. If a calculated final one-time welding shrinkage is acting on the shell element whose thickness is same as it of plate, then deformation value must be underestimated. This research developed a methodology that total deformation after multi-pass welding can be analyzed by one time at shell element having original thickness of its plate. We use the SDB thermal distortion analysis method and verified by several experiment. The both experimental and analysis results showed good agreements.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2056-2059
• /
• 2003

The rate control is very important to solve the difficulties arising from bit-rate on transmission through channel and to improve video quality. It is very important to point out that the amount of output bit obtained the encoding process using rate controller brings many problems on the transmission of channels and furthermore output bitstream decoded affects directly on the visual quality of displayed subject. In this paper, the effective rate control algorithm by rate-distortion modeling using MPEG-4 encoder is proposed. The proposed rate control has applied different weighting by VOP prediction type and even in the same VOP prediction type, the predicted reference allocates more bit. Through these bit allocation the minimization of distortion can be achieved preventing propagation of quantization error The amount of saved bitstream obtained by the proposed algorithm in this thesis is allocated to I-VOP using region of interest(ROI) selective enhancement on the next GOV encoding process and this process brought the improvement of visual quality.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.994-1003
• /
• 2016

Two major obstacles in the utilization of electrical vehicles are their price and range. The collaboration of direct torque control (DTC) with induction motor (IM) is preferred for its low cost, easy implementation, and parameter independency. However, in terms of edges, the method has drawbacks, such as variable switching frequency and undesired current harmonic distortion. These drawbacks result in acoustic noise, reduced efficiency, and electromagnetic interference. A feed-forward approach for stator-flux-oriented DTC with space vector pulse-width modulation is presented in in this paper. The outcome of the proposed method is low current harmonic distortion with fixed switching frequency while preserving the torque performance and simple application feature of basic DTC. The method is applicable to existing and forthcoming IM drive systems via software adaptation. The validity of the proposed method is confirmed by simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1617-1620
• /
• 1997

This paper describes the camera caliberation based-neural network with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distoriton causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed camera aclibration is illustrated by simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.399-402
• /
• 1996

The electrodynamic loudspeakers should have a wide dynamic range to reproduce various sound levels. When the input signal is small, the radiated sound from the loudspeaker is not so much distorted. However, for large input signal with low frequency component the radiated sound is significantly distorted due to the nonlinearities of the loudspeaker. The suspension, damping, and magnetic flux of loudspeaker are the main sources of the nonlinearity. Such electromechanical parameters related to harmonic distortion have been represented by a polynomial model for diaphragm displacement, while each of the polynomial coefficient is evaluated by using the principle of harmonic balance experimentally. Based on the polynomial model, we designed a compensator for nonlinear harmonic distortion of direct radiator loudspeaker. Than observer is used to estimate the displacement of the loudspeaker diaphragm, which is rather difficult to measure directly in the conventional setting. The usefulness of the designed compensator is demonstrated by numerical simulations. Simulation results show about 30db decrease at the second and third higher harmonic distortions. We carry out an experiment on speaker to verify designed controller and nonlinear observer.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1E
• /
• pp.32-36
• /
• 1999

In the area of the speech synthesis techniques, the waveform coding methods maintain the intelligibility and naturalness of synthetic speech. In order to apply the waveform coding techniques to synthesis by rule, we must be able to alter the pitches of synthetic speech. In this paper, we propose a new pitch altering method that compensates phase distortion of the cepstral pitch alteration method with time scaling method in the time domain. This method can remove some spectrum distortion which is occurred in conjunction point between the waveforms. For performance test the spectrum distortion rate was used as objective criterion and the MOS(Mean Opinion Score) was used as subjective criterion. As a result, the spectrum distortion and MOS are obtained by 0.66% and 3.9, respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.31-36
• /
• 1997

Bit allocation is a critical problem in video encoding such as MPEG. To improve the quality of the reconstructed sequence for a given bit rate, the assigned target bits for a group of pictures (GOP) must be allocated to each picture efficiently. In this paper, we derive a target bit allocation algorithm for more efficient rate control, by assuming that the average rate-distortion curve for an input source is logarithmic. This target bit allocation is based on Shannon's rate-distortion theory, which deals with the minimization of source distortion subject to a channel rate constraint. Simulation results show that the proposed target bit allocation algorithm provides better performance than the one in MPEG-2 Test Model 5 (TM5).

• Current Optics and Photonics
• /
• v.5 no.6
• /
• pp.627-640
• /
• 2021

In a free-space coherent optical communication system, wavefront distortion is frequently beyond the correction range of the adaptive-optics system after the laser has propagated through the atmospheric turbulence. A method of residual wavefront correction is proposed, to improve the quality of coherent optical communication in free space. The relationship between the wavefront phase expanded by Zernike polynomials and the mixing efficiency is derived analytically. The influence of Zernike-polynomial distortion on the bit-error rate (BER) of a phase-modulation system is analyzed. From the theoretical analysis, the BER of the system changes periodically, due to the periodic extension of wavefront distortion. Experimental results show that the BER after correction is reduced from 10^-1 to 10^-4; however, when the closed-loop control algorithm with residual correction is used, the experimental results show that the BER is reduced from 10^-1 to 10^-7.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.778-785
• /
• 2017

This paper presents a control method for reducing the distortion of the grid current at a grid-connected three-level neutral point clamped (NPC) inverter. The grid current is distorted from the 5th and 7th harmonic components in the stationary frame current also the 6th harmonic component in the synchronous frame current. In this paper, the 6th harmonic component on synchronous frame is controlled by using all-pass filters (APFs) and proportional integral (PI) controllers for distortion of the grid side. When transformed the 6th harmonic component is controlled, the 5th and 7th harmonic components are reduced. The validity of the proposed control method is verified by simulation and experiment results using a 25kW three-level NPC inverter.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.23-30
• /
• 2010

A detailed circuit level model requires a small sampling time to represent high frequency switching behaviors with proper resolution. The small sampling time leads a large execution time to obtain the system analysis results. As the alternative of the detailed circuit model, an averaged PWM switch model was proposed for the rapid system level analysis. There exists a voltage distortion between the reference and output voltage because of non-ideal switching characteristics, such as the dead-time, diode forward voltage drop and conduction resistance. This paper analyzed causes and effects of the voltage distortion. The average inverter model, which reflecting this voltage distortion, is developed for the rapid and accurate analysis of automotive electric drive system in MATLAB/Simulink environment. The rapidity and accuracy of the proposed inverter model is proved through comparison between simulation and experiment.