• 디지털산업정보학회논문지
• /
• 제18권4호
• /
• pp.13-21
• /
• 2022

Recently, in wireless video sensor networks(WVSN), various schemes for efficient video data transmission have been studied. In this paper, a layer based cooperative relaying(LCR) algorithm is proposed for minimizing scalable video transmission distortion from packet loss in WVSN. The proposed LCR algorithm consists of two modules. In the first step, a parameter based error propagation metric is proposed to predict the effect of each scalable layer on video quality degradation at low complexity. In the second step, a layer-based cooperative relay algorithm is proposed to minimize distortion due to packet loss using the proposed error propagation metric and channel information of the video sensor node and relay node. In the experiment, the proposed algorithm showed that the improvement of peak signal-to-noise ratio (PSNR) in various channel environments, compared to the previous algorithm(Energy based Cooperative Relaying, ECR) without considering the metric of error propagation.The proposed LCR algorithm minimizes video quality degradation from packet loss using both the channel information of relaying node and the amount of layer based error propagation in scalable video.

• 한국정보전자통신기술학회논문지
• /
• 제13권1호
• /
• pp.8-16
• /
• 2020

본 논문에서는 polymerase chain reaction (PCR) 응용에 적합한 저잡음 CMOS 이미지 센서에 사용되는 컬럼-패러럴 analog-to-digital converter (ADC) 어레이를 위한 cascaded-of-integrator feedforward (CIFF) 구조의 단일 비트 2차 델타-시그마 모듈레이터를 제안하였다. 제안된 모듈레이터는 CMOS 이미지 센서에 입사된 빛의 신호에 해당하는 픽셀 출력 전압을 디지털 신호로 변환시키는 컬럼-패러럴 ADC 어레이를 위해 하나의 픽셀 폭과 동일한 10㎛ 컬럼 폭 내에 2개의 스위치드 커패시터 적분기와 단일 비트 비교기로 구현하였다. 또한, 모든 컬럼의 모듈레이터를 동시에 구동하기 위한 주변 회로인 비중첩 클록 발생기 및 바이어스 회로를 구성하였다. 제안된 델타-시그마 모듈레이터는 110nm CMOS 공정으로 구현하였으며 12kHz 대역폭에 대해 418의 oversampling ratio (OSR)로 88.1dB의 signal-to-noise-and-distortion ratio (SNDR), 88.6dB의 spurious-free dynamic range (SFDR) 및 14.3비트의 effective-number-of-bits (ENOB)을 달성하였다. 델타 시그마 모듈레이터의 면적 및 전력 소비는 각각 970×10 ㎛2 및 248㎼이다.

• 대한한방소아과학회지
• /
• 제16권2호
• /
• pp.171-185
• /
• 2002

Objectives : The purpose of this study was to investigate the spine distortion and self-conscious pain in high school students. Method : Using the phase-shifting moire developed by KAIST(Korea Advanced Institute of Science and Technology) we measured the back surface distortion, and using questionnaire investigation, we investigated the self-conscious pain in 30 high school students(17 boy students and 13 girl students). Results : This study show that low back pain was most cases, and next headache, upper back pain, abdominal pain, neck pain, shoulder pain, leg pain, chest pain and gluteal pain. The ratio of each self-conscious pain was 90.0%, 86.7%, 83.3%, 83.3%, 80.0%, 76.7%, 66.7%, 33.3%, 33.3%, 30.0%. In remainder value of left and right shoulder, above of 3.0 were three students., above 2.0 to bellow 3.0 were 10 students, bellow 2.0 were 17 students. In remainder value of left and right gluteal, above of 2.0 was one students, above 1.0 to bellow 2.0 were 18 students, bellow 1.0 were 10 students. In remainder value of cervical vertical line to left and right axillae, above 4.0 was 1 student, above 3.0 to bellow 2.0 were 2 students, above 2.0 to bellow 3.0 were 3 students, above 1.0 to bellow 2.0 were 16 students, bellow 1.0 were 7 students. In remainder value of gluteal vertical line to left and right axillae, above 6.0 was 1 student, above 5.0 to bellow 6.0 were 7 students, above 4.0 to bellow 5.0 were 3 students, above 3.0 to bellow 4.0 were 2 students, above 2.0 to bellow 3.0 were 5 students, above 1.0 to bellow 2.0 were 7 students, bellow 1.0 were 5 students. In remainder value of cervical vertical line to gluteal vertical line, above 40 was 1 student, above 3.0 to bellow 4.0 were 4 students, above 3.0 to bellow 3.0 were 6 students, above 1.0 to bellow 2.0 were 8 students, bellow 1.0 were 11 students. Conclusion : It is suggested that the significant correlation exist between the spinal distortion and self-conscious pain. And we can find many cases as spinal distortion in high school students also. We have to study further more about juvenile postural distortion and it's prevention.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.81-98
• /
• 1999

도심지 터널 건설에 있어서 중요한 고려 사항중 하나가 지상 건물에 대한 터널 굴착의 영향을 평가하는 문제이다. 일반적으로 터널 굴착에 의한 지표침하로 인접구조물이 영향을 받기도 하지만 기존 인접구조물이 터널 굴착에 따른 지표침하에 영향을 미치기도 한다. 이러한 터널 굴착에 의한 기존 인접구조물의 침하억제 효과와 구조물 손상 평가인자의 감소효과를 규명하기 위해서 3차원 탄소성 유한요소해석을 수행하였다. 또한, 본 연구에서는 터널 굴착에 기인한 지반침하가 인접구조물에 미치는 영향과 인접구조물이 지표침하에 미치는 영향을 규명하기 위해서 총 162개의 2차원 탄소성 유한요소 모델을 설정하고, 매개변수 변환연구를 수행하였다. 본 연구에서는 구조물의 폭과 구조물의 축강성 및 휨강성, 구조물의 위치, 터널 심도 등을 고려하였다. 그리고, 구조물과 지반침하의 상호작용을 표현하기 위해서 구조물의 손상평가 인자인 뒤틈각(angular distortion), 처짐비(deflection ratio), 건물의 최대침하량, 부등침하량 및 수평변형률 등의 변화를 관찰하였다. 한편, 지반의 강성과 구조물의 축, 휨강성을 대표할 수 있는 상대 강성비를 도입함으로써 터널 설계자가 활용할 수 있는 도표를 제시하였고, 구조물을 고려하지 않은 상태에서의 greenfield 지표침하 트라프를 수정할 수 있는 보정계수(modification factor) 개념을 도입하였다. 본 연구에서는 구조물과 지표침하와의 상호 간섭효과에 의한 지표침하의 억제와 인접구조물 손상평가 인자들의 감소효과를 고려할 수 있도록 하기 위해서 설계 단계에서 보정계수를 활용한 인접구조물의 합리적인 손상평가방법을 제안하였다.

• ETRI Journal
• /
• 제19권2호
• /
• pp.35-47
• /
• 1997

A power amplifier operating at 3.3 V has been developed for CDMA/AMPS dual-mode cellular phones. It consists of linear GaAs power MESFET's, a new gate bias control circuit, and an output matching circuit which prevents the drain terminal of the second MESF from generating the harmonics. The relationship between the intermodulation distortion and the spectral regrowth of the power amplifier has been investigated with gate bias by using the two-tone test method and the adjacent channel leakage power ratio (ACPR) method of CDMA signals. The dissipation power of the power amplifier with a gate bias control circuit is minimized to below 1000 mW in the range of the low power levels while satisfying the ACPR of less than -26 dBc for CDMA mode. The ACPR of the power amplifier is measured to be -33 dBc at a high output power of 26 dBm.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.164-175
• /
• 1996

In this thesis, to cope with severe intersymbol interference and nonlinear distotions of the digital magnetic recording channel a neural decision feedback equalizer (NDFE) and an adaptive neural equalizer (NE) are applied. The digital magnetic recording channels with various recording densities and different types of the nonlinear distortions are considered. The computer simulation shows that as the nonlinear distortion is increased, the neural equalizers (NdFE, NE) have advantages of approximately 2-4 dB in signal to noise ratio (SNR) over the onventional eualizers to reach sme bit error rate and, a sthe recording density is increased, 1~5 dB of SNR improvement are also gained. Especially the NdFE gives a superior performance over the other equalizers when there is a severe nonlinear distortion in the digital magnetic channel.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.556-560
• /
• 2001

In this paper, a soft-switching discontinuous mode (DCM) power factor corrected (PFC) converter is analyzed by applying the double Fourier series expansion. It is found that the fundamental component and higher-order harmonics included in the input current waveform are obtained by the Fourier series expansion of the mean value of the inductor current. From the theoretical analysis, a new method removing the distortion of the input current waveform is proposed. In spite of an open loop system, the proposed method makes a great improvement of the total harmonic distortion even if the ratio of output voltage to input voltage is very low.

• International Journal of Korean Welding Society
• /
• 제5권1호
• /
• pp.35-43
• /
• 2005

This paper deals with the optimum condition for spot heating to correct the thin buckled panel caused by welding. Heat input models for each flame torch tip (500, 800, 2000) with standoff were establish using FEA to evaluate the temperature distribution of the heated plate and verified by experiment. With the heat input models developed for each torch tip, the effect of heating variables including ramp ratio(R) and standoff on the radial shrinkage and angular distortion was identified using FEA. Based on the results, the proper conditions of spot heating with air cooling were established. The amount and distribution of the radial shrinkage by spot heating were formulated as the function of heating variables and in-plane rigidity of the plate.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.151-155
• /
• 2004

본 논문은 밀리미터파 OFDM 무선 랜 시스템의 ACPR(Adjacent Channel Power Ratio)영향을 모델링을 통하여 분석하였다. 전력 증폭기, 시스템 시뮬레이션기술을 분석하기 위하여 AM-to-PM 모델링을 사용하였다. 전력 증폭기 ACPR은 OFDM 변조(modulation)를 이용하여 시뮬레이션하였다. 증폭기의 back-off 값은 요구되는 ACPR을 만족시키며, ACPR감소치는 모델링한 AM-to-PM의 왜곡과 측정한 AM-to-PM의 왜곡을 이용하여 예측이 가능하였다.