• Journal of the Korean Geotechnical Society
• /
• v.29 no.4
• /
• pp.23-32
• /
• 2013

In order to evaluate the bearing capacity behaviour of a monopod suction bucket foundation for an offshore wind tower at the western sea of Korea, a centrifuge load test and numerical analyses were performed. The monopod bucket foundation was designed to be installed in a silty sand layer. The model soil was prepared to simulate a target site by using soil samples having similar properties and controlling relative density. In-flight miniature cone penetration test and bender element array were used to confirm that the model soil had represented the target site conditions. The load - rotation curve of the centrifuge load test was analysed. A series of numerical analyses were performed to validate the experimental conditions. Self-weight of the model, distance to the boundary and elastic modulus of the soil layer were varied to study their effects on the load - rotation curves.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.120-126
• /
• 2016

Eco-friendly acrylic resin/clay nanocomposites containing pristine montmorillonite (PM) or modified clays (30B and 25A) were prepared from acrylic and styrenic monomers using non-aqueous dispersion (NAD) polymerization. Effect of nanoclays on physical properties of polymerization product and resulting nanocomposites was investigated. In view of NAD particle stability, addition of nanoclay at the beginning of polymerization is proved to be good. Results of gel fraction, acid value and viscosity of the NAD product showed that nanocomposites containing clay 25A showed better physical properties than the ones with other clays. GPC results exhibit the increase in molecular weight and decrease in polydispersity index for the 25A nanocomposite. Increase in layer distance confirmed from XRD analysis showed good dispersion of 25A in the nanocomposite. Thermal and dynamic mechanical analysis showed that highest glass transition temperature and storage modulus for 25A nanocomposites. These results indicate that 25A nanoclay gives the best properties in the process of non-aqueous dispersion polymerization of acrylic resin/nanoclay nanocomposites.

• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.1067-1072
• /
• 2016

In this study, we determined the ecological characteristics of Strix aluco, which is designated as an endangered category II species. Towards this, we identified the actual home range of Strix aluco that breed in Korea, and collected the data necessary for protecting, preserving and managing owl populations. This study was conducted from April 14 to May 20 of 2016 during the breeding season of Strix aluco as part of the 4th National Ecosystem Survey and in accordance with the Natural Environment Conservation Act. We captured and subsequently released a female owl with a total length of 423.5mm and a weight of 550g in Kyungbuk area, succeeded in tracking it for the first time in Korea and secured 6 points of direct observation and satellite tracking observation. The distance from the nest to the farthest point was 93m. As a result of the analysis of habitat points within a100m-radius during breeding period, it was established that their habitat consists of 34.2% of non-irrigated land, 30.6% of mixed forest land, 10.5% of orchard, and 9.4% of natural grassland. These findings are consistent with the previous estimate of home range studies. Further research based on follow-up studies on males or other individuals is required to develop a stronger basis for protection and conservation of endangered wildlife class II owls.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.4
• /
• pp.961-970
• /
• 2017

The differential power analysis calculates the intermediate value related to sensitive information and substitute into the power model to obtain (hypothesized) power consumption. After analyzing the calculated power consumption and measuring power consumption, the secret information value can be obtained. Hamming weight and hamming distance models are most commonly used power consumption model, and the power consumption model is obtained through the modeling technique. If the power consumption model assumed by the actual equipment differs from the power consumption of the actual equipment, the side channel analysis performance is declined. In this paper, we propose a method that records measured power consumption and exploits as power consumption model. The proposed method uses the power consumption at the time when the information (plain text, cipher text, etc.) available in the encryption process. The proposed method does not need template in advance and uses the power consumption measured by the actual equipment, so it accurately reflects the power consumption model of the equipment.. Simulation and experiments show that by using our proposed method, side channel analysis is improved on the existing power modeling method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.371-378
• /
• 2015

Range extenders, which are power generation systems driven by small engines, extend the driving distance and time of electric vehicles (EVs) through continuous charging of batteries. The currently used range extenders with gasoline engines pose limitations with regard to the realization of high-power compact systems, owing to their complex structure and low energy density. In contrast, micro gas turbine (MGT) range extenders (MGT power packs) possess high power and low weight, and can therefore be significantly reduced in size despite increase in speed. In this study, an MGT power pack for the range extenders of EVs was developed using a turbo-prop micro turbine, an alternator for passenger vehicles and electric batteries. The operating characteristics of the MGT power pack were measured through a series of experiments conducted under electrical no-load and load conditions. Their power generation performance and efficiency were measured under various electrical loads and power transmission gear ratios. From the results, electrical load was found to have no influence on power generation performance. The maximum electrical power output was 0.8 kW at a core turbine speed of 150 krpm, and the application of 3:1 reduction gear to the turbine output shaft increased the power to 1.5 kW by 88%. This implies that the test results demonstrated stable power generation performance of the MGT power pack regardless of vehicle load changes, thus revealing its feasibility for use with the range extenders of EVs.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.17-23
• /
• 1997

This experiment was conducted to investigate the effect of planting date and planting density on the growth and yield characters of yacon (Polymnia sonchifolia POEPP) and to establish cultivation method in the middle region of Korea. An introduced variety of yacon was used. Seeding dates were from April 5 to April 7,and seedlings were trasplanted three times on the May 25, june 5, and June 15 with the intervals of 10 days. Planting densities were 80(width) $\times$ 35(distance) cm, 80 $\times$ 45cm, and 80 $\times$ 55cm. Plant height was not significant among planting dates, but was longer in the order of 80 $\times$ 55cm, 80 $\times$ 35cm, and 80 $\times$ 35cm among planting densities. Fresh weight of top part was heavier as the planting dates were faster and planting densities were narrower. Total yeid of tuber had no significant among planting dates and was higher in the density with 80 $\times$ 45cm and had the same tendency in the yeild of commercial goods. Correlation coefficient between plant height and yeild of commercial goods was highly positive(r= 0.927**).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.121-135
• /
• 2014

Object-based classification methods provide a valid alternative to traditional pixel-based methods. This study reports the results of an object-based classification to examine land cover in the demilitarized zones(DMZs) of Inje-gun. We used land cover classes(7 classes for main category and 13 classes for sub-category) selected from the criteria by Korea Ministry of Environment. The average and standard deviation of the spectrum values, and homogeneity of GLCM were chosen to map land cover types in an hierarchical approach using the nearest neighborhood method. We then identified the distributional characteristics of land cover by considering 3 topographic characteristics (altitude, slope gradient, distance from the Southern Limited Line(SLL)) within the DMZs. The results showed that scale 72, shape 0.2, color 0.8, compactness 0.5 and smoothness 0.5 were the optimum weight values while scale, shape and color were most influenced parameters in image segmentation. The forests (92%) were main land cover type in the DMZs; the grassland(5%), the urban area (2%) and the forests (broadleaf forest: 44%, mixed forest: 42%, coniferous forest: 6%) also occupied mostly in land cover classes for sub-category. The results also showed that facilities and roads had higher density within 2 km from the SLL, while paddy, field and bare land were distributed largely outside 6 km from the SLL. In addition, there was apparent distinction in land cover by topographic characteristics. The forest had higher density at above altitude 600m and above slope gradient $30^{\circ}$ while agriculture, bare land and grass land were distributed mainly at below altitude 600m and below slope gradient $30^{\circ}$.

• Journal of Aquaculture
• /
• v.8 no.4
• /
• pp.251-260
• /
• 1995

Experimental transportations of the olive flounder (Paralichthys olivaceus) seedlings (body weight $2.1\pm0.39g$) with polyethylene vinyl bag were Performed to study the change of dissolved oxygen (DO) during transportation, survival rate and feeding activity of seedlings after transportation. The distance and time required for the transportations were 272 km and 11 hours, respectively. DO was rapidly decreased within 3 hours (P<0.05) during the transportation of seedlings of 40 fish in 10l of sea water at $15.6\~17.8^{\circ}C$ of initial water temperature with 5 ml/l of initial DO. The decreasing tendency of DO (Y) according to elapsed time (X) was expressed an equation of $Y\;=\;2.7444X^{-0.4780}$ (r=0.8071). Feeding activity of the seedlings after transportation supplemented with oxygen and icepack besides above transport conditions was significantly higher than that of fish supplemented with icepack only (P<0.05). It was desirable to starve the seedlings for 36 hours before transportation. Survival rate of seedlings was greatly reduced, when the dissolved oxygen concentration was lowered below the range of $0.7\~0.94ml/l$ just after transportation.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.232-237
• /
• 2001

This study was conducted to clarify the effects of physical stimulation to the rice plant by free-ranging ducks (Chinese native ducks) on growth, lodging resistance and yield of the rice plants in a rice-duck farming system. Two paddy fields were used for this experiment, one exposed to physical stimulation (PS) and the other with no physical stimulation (NPS). Fifteen days after ducks were introduced into the paddy plot, rice plants in the PS field were significantly (P<0.05) shorter than those in the NPS field. Measurements of lodging characteristics showed that, the 3rd internode was significantly (P<0.05) shorter in the PS treatment than in the NPS treatment, but neither the 4th internode length nor the center of gravity of the rice plants differed between treatments. The breaking strength of $N_4$ in PS rice was significantly (P<0.05) higher than in NPS rice, however the bending moment and the lodging index of $N_3$ (distance between fulcra - 5 cm) was significantly (P<0.05) lower in PS than in NPS. The number of panicles per $m^2$ was significantly (P<0.05) greater in PS rice than in NPS, but there was no such difference in spikelet number per panicle, percentage of ripened grain or weight per 1000 kernels. Paddy rice yield per $m^2$ in the PS treatment was significantly (P<0.05) higher than that in the NPS treatment.