• 한국의류학회지
• /
• 제25권4호
• /
• pp.707-718
• /
• 2001

The purpose of this study is to evaluate a newly developed protective suit with the fragments of grenade. The protection efficiency should be strengthened upon the degree of wound. The fragment weight of the used grenade was measured and the kinetic energy of the maximum speed of the fragments in the field test was 137.7J and this could be the protective efficiency test by the multitude fragments in less than 0.031g of the M16A1. The panel inserted to the new demining suit has protection rate of 100% within the distance of 1m and sample II has protection rate of 100% only beyond the distance of 5m. The test showed that the protection rate on the protective suit of the existing garment was comparatively high, however, the protection rate of the sleeve part was very low. The new demining suit through the research demand some complementary measures to lower the temperatures in ear, average skin temperatures, and the temperatures-humidity inside the clothing for summer climate condition, It showed that 30 minutes of rest on the clothing was difficult to go back to the original condition. But in winter climate condition, there was no problem in the temperature, humidity, and comfort to go back to the original condition during the rest and was better in warmth.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.741-746
• /
• 2001

This paper presents an investigation of a vehicle-to-vehicle distance control using a Hardware-in-the-Loop Simulation(HiLS) system. Since vehicle tests are costly and time consuming, how to establish a efficient and low cost development tool is an important issue. The HiLS system consists of a stepper motor, an electronic vacuum booster, a controller unit and two computers which are used to form real time simulation and to save vehicle parameters and signals of actuator through a CAN(Controller Area Network). Adoption of a CAN for communication is a trend in the automotive industry. Since this environment is the same as that of a real vehicle, a distance control logic verified in laboratory can be easily transfered to a test vehicle.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.71-77
• /
• 2013

This Study aims at investigating actual condition on attending school road of children and analyzing empirically the characteristics of cognition and the influence of safety on school road. This study findings are as follows : 1) Walking alone to go to school is the highest rates among Commuting Mode, and Commuting distance to school is nearly doubles than range of school zone(300 m). 2) Among characteristics of urban spatial structure affecting on influence classify safety of school road, 'Commuting Distance' has been drawn to most influential variable. Especially, there are 4 types classified by commuting distance and it became obvious that the longer the distance, the lower the safety score(under 127 m=76.9 points, Over 451 m=58.3 points). 3) As a result of investigating the influence of Safety on attending school road, Vehicle commuting speed urder 127 m as internal of school zone, and Walking and crossing convenience over 451 m as external of school zone have a lot of influence on safety cognition on school road. Therefore Safety on school road should be considering the commuting distance to school among surrounding characteristics, needed for improvement plan and program based on real safety cognition of children.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.223-232
• /
• 2004

The change of pressure drop according to the change in the inlet concentration, pulse interval, and injection distance of pulse air jet type bag filters, and the effect of venturi installation are as follows. The pressure drop with the range of 30 to $50mmH_2O$ varies according to the injection distance with 30, 50, 70, 90sec and the inlet concentration of venture built-in fabric filters. For the lower concentration of 0.5g/㎥ and 1g/㎥, the pressure $drop(\DeltaP)$ was stable 60 to 90minutes after operation. For the higher concentration of 3g/㎥, as $\DeltaP$ continues to go up, pulse interval should be set shorter than 30 seconds. The pressure drop with the injection distance of 1l0mm, when inlet dust concentration is 0.5g/㎥ or 1g/㎥, is 1.3 to 2 lower than with the injection distance of 50, 160, and 220mm, which means that the inflow amount of the secondary air by the instant acceleration is large. The injection distance of 2g/㎥ and 3g/㎥ has the similar pressure distribution. The higher inlet concentration is, the more important pulse interval is than injection distance. The pressure drop has proved to be larger when inlet concentration is lower and injection distance closer, on condition that the venturi is installed. The change in the pressure drop was smallest when injection distance was 50mm, followed by 220mm, 160mm, and 110mm.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.62-68
• /
• 2016

Laser distance measuring systems are used in many fields with high precision. However, when measuring the reflector such as the mirror and the black color, a laser distance measuring system does not guarantee the measurement accuracy. In order to measure the shape of the cargo, this study proposes the radar distance measurement system. The radar distance measuring system is composed of a distance measuring unit with a 24 GHz antenna module, a signal processing and control board and the 1-axis tilting unit. And, this study developed a monitoring program to monitor the measured data. In order to evaluate performance of the developed system, the distance measurement tests are carried out. The distance error was about 6-15 cm. However, considering the size of the cargo, the precision is not a problem. And, cargo shape was measured by using the distance information measured by the 1-axis tilting unit. It could get a 2 dimension shape profile for the cargo stacked in a yard.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.644-648
• /
• 2016

In order to examine how the solid-liquid interface responds to temperature variation depending on the materials characteristics, i.e. faceted phase or nonfaceted phase, the moving solid-liquid interface of transparent organic material, as a model substance for metallic materials (pivalic acid, camphene, salol, and camphor-50wt% naphthalene) was observed in-situ. Plots of the interface movement distance against time were obtained. The solid-liquid interface of the nonfaceted phase is atomically rough; it migrates in continuous mode, giving smooth curves of the distance-time plot. This is the case for pivalic acid and camphene. It was expected that the faceted phases would show different types of curves of the distance-time plot because of the atomically smooth solid-liquid interface. However, salol (faceted phase) shows a curve of the distance-time plot as smooth as that of the nonfaceted phases. This indicates that the solid-liquid interface of salol migrates as continuously as that of the nonfaceted phases. This is in contrast with the case of naphthalene, one of the faceted phases, for which the solid-liquid interface migrates in "stop and go" mode, giving a stepwise curve of the distance-time plot.

• 수산해양교육연구
• /
• 제21권4호
• /
• pp.586-591
• /
• 2009

The marine traffic accidents go on increasing owing to the increment of marine traffic capacity, and the solutions about these matters are vigorously considering by many researchers. When the watch officer navigates to the narrow channel, bend or an area obscured by an intervening obstruction and around the harbour limit he must follow the planned track. The watch officer can safely navigate along the course laid down only when he alters his course in advance before the new course distance earlier than the course alternation point. If we call this point to be changed in advance a turning bearing, the turning bearing is decided according to the direction and the range from the clearing objects. The turning bearing helps the watch officer to determine whether the ship is at wheel-over position or not. The author in this paper suggest how to make and use a curve graph which is decided according to the direction and the distance from the clearing objects. If the watch officer utilize this curve graph he can judge swiftly and precisely whether his ship is at the wheel - over position or not.

• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.155-162
• /
• 2004

In order to account for a price variation of apartment that places near a newly constructed subway station, a spatial hedonic model was developed to examine spacial characteristics that affect a purchasing price of an apartment using a White Estimator. In particular, the paper aims to examine various effects of subway 7 construction on an apartment price in Seoul Metropolitan Area. As explanatory variables, an apartment size, distance to a closest subway station, distance to the Central Business District (CBD) of Seoul, the number of years after building, and a lagged variable of the apartment purchasing price were used. The lagged variable plays a role of representing a spatial weighted average of previous prices of other apartments that locate within 3 km from the apartment. For a precise study, an entire sample was divided into two sets, southern area and southwestern area of Seoul, and two different spatial hedonic models were estimated. Not only before and after analysis, but also with and without analysis were conducted to compare with different effects of the spatial characteristics of two areas. The results show that before the construction of the subway 7, the prices of the apartments in the southern area were more sensitive to the apartment size, the distance to a closest subway station, the distance to the CBD, and the prices of the other apartments locating within 3km rather than those in the southwestern area. After the construction, on contrast, it is found that the apartment purchasing prices in the southwestern area are more sensitive than those in the southern area due to people's expectation regarding a new development around the subway station. In addition, the prices of the apartments locating closely with a transfer station are more likely to go up by increase in the apartment size, the distance to the station, and the prices of the other apartments within 3 km. Compared with the negative effects of the distance to the station on the prices in the other models, the positive effect of the distance to the transfer station might be caused by the characteristics of commercial area in which people are not likely to live.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.113-119
• /
• 2002

A target adaptive guidance(TAG) algorithm is proposed employing the near-zone signal that can be measured from an infrared seeker. The guidance order is composed of a conventional PNG command and an additional command to be calculable from an additional LOS rate between a hot point of target and a required intercept point. The characteristic of the near-zone signal is similar to that of LOS rate that is inversely proportional to the square of time-to-go. Hence the proposed scheme can be applied to real systems with no estimator for time-to-go. From analysis results on the miss distance with perfect missile and perfect seeker, it follows that the proposed TAG algorithm guarantees missile to be ideally guided to the required intercept point. And it is less affected by the TAG start time and a proportional navigation ratio than other TAG schemes using a LOS rate such as a step bias or a ramp bias.

• 한국항해항만학회지
• /
• 제43권5호
• /
• pp.281-288
• /
• 2019

In this paper, we implemented a mobile application of location-based augmented reality that combines self-sensing technology and various safety information using technological advancements of the smartphone. Vessel navigation is a suitable area for augmented reality because it requires accurate knowledge of the distance and location of destinations, danger zones, AtoN, and adjacent vessels. Current smartphone applications only provide 2D images and location information. Such applications do not include information about the surrounding environment, and as a result, they can only function using their own sensing information and surrounding information into a location-based augmented reality. If you provide a variety of sensor information embedded in the smartphone to 'BadaGO', the implemented application through this study, 'BadaGO' can provide safe navigation information to the user device in real time with a variety of its own formed information. The user has a high practicality and applicability of a small ship that is supplied with safe navigation information in a changing marine environment only by providing information through the application on the smartphone.