• 한국전자파학회논문지
• /
• 제9권3호
• /
• pp.359-368
• /
• 1998

낙뢰뿐만 아니라 유도뢰에 의해서 발생되는 과도과전압에 대한 첨단전자장비의 보호대책이 중요 과제 중의 하나로 대두되었다. 본 논분에서는 낙뢰에 의해 발생된 수직전계와 수평자계를 측정하고 분석하였다. 낙뢰에 의해 발생한 전계와 자계 파형은 최초 피크 다음에 이어지는 수 개의 후속 피크틀을 가지며, 이들 피크값은 시간의 경과와 더불어 감소하는 형상으로 나타났다. 원거리 낙뢰에 의해 방사된 전계파형은 자계 파형과 거의 흡사하였다. 낙뢰에 의해서 발생한 전계 파형의 1O~90 % 상승시간은 정극성은 $4.65\mu\textrm{s}$, 부극성에서는 $3.29\mu\textrm{s}$이었으며, 또한 정.부극성의 낙뢰 모두 자계의 파미 (波尾)부분의 영점교차시간은 전계 파형에 비해서 훨씬 길게 나타났다.

• 한국전자파학회논문지
• /
• 제9권1호
• /
• pp.60-71
• /
• 1998

마이크로셀룰라 이동 무선 시스템의 전파환경은 레일라이, 라이시안 페이딩과 경로손실, 로그노말 새도우잉 동의 영향을 받는다. 이러한 복합적 환경에서 L개의 라이시안 간섭 사이에서 수신된 라이시안 신호와 로그노말 새도우영의 영향을 고려하여 재사용거리와 cluster 사이즈, 신호대 간섭의 전력비, 임계비(protection ratio) RI 둥 여러 파라미터에 대한 특성을 outage 확률을 이용하여 분석하였다. 또한 본 논문에서 이용한 outage 확률로 레일라이 신호와 단일 라이시안 간섭, 라이시안 신호와 레일라이 간섭, 라이시안 신호와 라이시안 간섭 둥에 대해 연구하였다. 이론 전개와 시뮬레이션 결과를 통해 로그노말 새도우드 라이시안 채널의 특성을 효과적으로 분석하였다.

• 한국지반환경공학회 논문집
• /
• 제13권8호
• /
• pp.35-43
• /
• 2012

널말뚝을 해안지역이나 도심지역에 건설하는 경우 주변에 위치한 횡방향 재하 말뚝의 영향권 내에 존재하게 되는 경우가 발생하게 되지만, 기존 설계방법에서는 이러한 영향에 대하여 고려하고 있지 않다. 본 연구를 통해 말뚝에 횡방향 하중이 재하되는 경우 근접한 널말뚝에 미치는 영향을 정량적으로 예측할 수 있는 방법을 제안하고자 한다. 상용프로그램인 ABAQUS를 이용하여 3차원 유한요소 모델을 만들었으며 지반 구성모델로는 Drucker-Prager 모델, 널말뚝과 말뚝은 선형탄성으로 거동하도록 모사하였다. 널말뚝의 휨강성, 말뚝과 널말뚝 간의 거리, 굴착깊이, 그리고 지반의 탄성계수 등 총 4가지 변수들을 사용하여 횡방향 재하 말뚝이 주변 널말뚝에 미치는 영향을 분석해 보았다. 수치해석 결과를 이용하여 널말뚝에 발생하는 최대 횡방향 변위 및 휨모멘트를 측정할 수 있는 간단한 식을 제시하였다.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.366-373
• /
• 2015

Sol-gel binder was prepared by hydrolysis and condensation reaction using boehmite sol and methyltrimethoxysilane as a function of aging-time. The coating slurry was composed of a plate-shape alumina in the sol-gel binder for the EPD process, in which particles dispersed in the slurry were deposited on the electrode under an electric field due to the surface charge. We studied the effects of three parameters: the content of boehmite, the aging time, and the applied voltage, on the physical, thermal, and electrical properties of the hybrid composite films by EPD. The amount of boehmite was 10 ~ 20 wt% and the aging time was 0.5 ~ 72, with a fixed amount of plate-shape alumina of 10 wt%. The condition of applied voltage was 5 ~ 30 V with a distance of 2 cm between the electrode during the EPD process. We confirmed that a structure of hybrid composite films of well-ordered plate alumina was deposited on the substrate when the film was prepared using a sol-gel binder composed of 15 wt% boehmite with 1 hr aging time and EPD at 10 V. The process shows a weight loss of 7% at $500^{\circ}C$ in TGA and a breakdown voltage of 8 kV at $87{\mu}m$.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.991-996
• /
• 2017

인간의 보행에서 안정적인 디딤을 가능하게 하는 동작특성은 보행 일주기의 60%를 차지하는 긴 디딤국면이다. 본 연구에서는 이러한 보행패턴을 자전거의 크랭크 구동장치에 반영하여 직립자세에서 안정적으로 구동할 수 있는 자전거를 설계하고자 한다. 크랭크의 회전속도를 디딤국면에서는 느리게 되돌림국면에서는 빠르게 움직이도록 급속귀환 기구를 크랭크 구동시스템에 적용하였다. 이 급속귀환 크랭크기구의 설계변수를 정의하고 설계변수의 변화가 크랭크의 거동에 미치는 영향을 시뮬레이션 하였다. 또한 실험장치를 제작한 후 탑승자의 구동동작을 분석한 결과 보행패턴을 접목한 크랭크는 사용자 무게중심 안정화에 기여하는 것으로 나타났다. 향후 보행패턴을 접목한 크랭크는 서서 타는 자전거의 구동시스템에 접목 가능할 것으로 보인다.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1350-1357
• /
• 2012

Medical system for personal health management recently changes its paradigm from hospital service to self home care based on ubiquitous technology for healthcare anywhere at any time. The present study developed a wireless bio-signal measurement system for patients to self manage pulmonary disease and benign prostate hyperplasia(BPH), both of which are chronic diseases with increasing frequency in modern society. Velocity-type respiratory air flow transducer adapted to develop respiratory module for pulmonary disease management was simplified in structure to measure uni-directional flow since most important diagnostic parameters are evaluated on the expiratory flow signal only. Standard weight measurement technique was introduced to obtain urinary flow signal for BPH management. Three load cell signals were acquired for averaging to minimize noise, followed by accuracy evaluation. Transmission and receiver modules were also developed with user program for wireless communication. Averaged relative errors were 2.05 and 1.02% for respiratory volume and maximal flow rate, respectively, and the relative error was 2.17% for urinary volume, demonstrating that both modules enabled very accurate measurements. Wireless communication distance was verified within 15m, long enough for home care application. The present system allows the user to select a necessary measurement module on a particular health demand and to immediately provide the self-test results, thus better quality health care would be possible.

• 정보처리학회논문지B
• /
• 제16B권1호
• /
• pp.47-54
• /
• 2009

측정점으로부터의 3차원 객체 자동인식은 컴퓨터비전, 지능형로봇 등의 분야에서 주요 연구주제이다. 본 논문에서 저자는 측정오차가 포함되어 있으며 정렬되지 않은 대용량 3차원 측정점으로부터 객체를 자동적으로 추출하며 그 형상계수를 추정하는 소프트웨어 기술에 대한 소개를 하고자 한다. 해당 소프트웨어는 기능적으로 상호 연결된 형상모델 제시, 측정점 분할, 형상모델 맞춤의 세 부분으로 이루어졌으며 최단거리 최소제곱법(ODF)이 핵심요소이다. ODF는 형상모델과 측정점 사이의 최단거리의 제곱합을 최소화하는 형상모델 계수를 추정한다. 무작위로 선정된 부분 측정점에 대한 임시 형상모델로서 이차 곡면이 ODF에 의하여 구하여지면 우리는 이로부터 3차원 객체를 자동적으로 추출하는 과정인 최종 형상모델 제시, 측정점 분할, 형상모델 맞춤에 필요한 초기값을 제공할 수 있다. 소개된 소프트웨어 기술을 실제 3차원 측정점에 적용함으로써 그의 성능을 확인하고자 한다.

• 대한방사선치료학회지
• /
• 제10권1호
• /
• pp.11-22
• /
• 1998

The absolute absorbed dose can be determined according to the measurement conditions ; measurement material, detector, energy and calibration protocols. The purpose of this study is to compare the absolute absorbed dose due to the differences of measurement condition and calibration protocols for photon beams. Dosimetric measurements were performed with a farmer type PTW and NEL ionization chambers in water, solid water, and polystyrene phantoms using 6MV photon beams from Siemens linear accelerator. Measurements were made along the central axis of $10{\times}10cm$ field size for constant target to surface distance of 100cm for water, solid water and polystyrene phantom. Theoretical absorbed dose intercomparisons between TG21 and IAEA protocol were performed for various measurement combinations on phantom, ion chamber, and electrometer. There were no significant differences of absorbed dose value between TG2l and IAEA protocol. The differences between two protocols are within $1\%\;while\;the\;average\;value\;of\;IAEA\;protocol\;was\;0.5\%$ smaller than TG2l protocol. For the purpose of comparison, all the relative absorbed dose were nomalized to NEL ion chamber with Keithley electrometer and water phantom, The average differences are within $1\%,\;but\;individual\;discrepancies\;are\;in\;the\;range\;of\;-2.5\%\;to\;1.2\%$ depending upon the choice of measurement combination. The largest discrepancy of $-25\%$ was observed when NEL ion chamber with Keithley electrometer is used in solid water phantom. The main cause for this discrepancy is due to the use of same parameters of stopping power, absorption coefficient, etc. as used in water phantom. It should be mentioned that the solid water phantom is not recommended for absolute dose calibration as the alternative of water, since absorbed dose show some dependency on phantom material other than water. In conclusion, the trend of variation was not much dependent on calibration protocol. However, It shows that absorbed dose could be affected by phantom material other than water.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.469-472
• /
• 2008

In this paper, we discuss the recent trends on the passive UHF RFID tag chip design techniques and several important system parameters. We also summarize link budget studies on both conventional and modem UHF RFID communications. The paper highlights the reverse link limited case, which has known to be the minor concern if reader continuous wave (CW) can reach the tag in sufficient level. This makes sense when the tag sensitivity is rather high (over 10-12${\mu}W$); however, since the tag chip fabrication technologies have been developed by time, the tag chip threshold levels are now less-dominant in determining link margin. If the tag limitation can be alleviated, the forward link limited case can be resolved; thus, we rather focus on the path-loss problem. Since the path-losses are still exist in both forward and reverse links, and it can be doubled while CW travels the reader-tag-reader path because forward link and reverse link are on the same distance. Consider if reader receiver sensitivity is very high in the worst case. In this case, weaken tag response (i.e., backscatters) cannot reach the level that reader receiver can process tag data; bit-error rate can be higher. Overall, backscatter levels should be high enough so that reader receiver can correctly function. After discussing link budget, we carried out practical measurements on fading effects between two circularly polarized UHF RFID antennas in a small scale area.