• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.152-169
• /
• 2018

The purpose of this study was to analyze the effect of adjacentroads on the concentration of negative air ions in urban neighborhood park. The measured factors were negative air ion concentration, positive airion concentration, airtemperature,relative humidity, wind speed, green formation volume factor (GVZ) and distance from highway and general road. The mean negative air ion concentration was $206ea/cm^3$ and the positive air ion concentration was $416ea/cm^3$ in the influence zone of roads. On the other hand, the mean negative air ion was $339ea/cm^3$ and the positive air ion was $229ea/cm^3$ in the unaffected zone of roads, which are inner areas of the park. The difference of the negative air ion concentration according to the influence of the road was statistically significant. The negative air ion concentration model was presented by integrating the correlation analysis with the influence factors, and the explanatory power of the model was increased by adding the influence factor of the road.

• Journal of the Korean association of regional geographers
• /
• v.16 no.1
• /
• pp.59-75
• /
• 2010

This study analyzed on the recognition characteristics of high school students in Seoul about the factors influencing the land value. The results are as follows; First, when the factors influencing the land value was divided into 'the factors related with the publicly assessed land value' and 'the unrelated factors.' Students recognized that the former had more influence on the land value than the latter. Second, students recognized that 'the relative factors of land' had more influence on the land value than 'the absolute factors of land'. Third, as a result of checking how much five evaluation criterions influence on the recognition characteristics about the factors influencing the land value, the distance to major facilities had the most influence on the recognition, while the situation of land use had the weakest one. Among 13 factors, the distance from the convenience facilities was most influential and the shape of the land was least influential. Fourth, there was a gap between recognition of choosing the highest land value areas and the lowest land value areas and recognition of degree that the factor influencing the land value had an effect on the land value. Lastly, when the result of recognition about factors influencing the land value and the land value ranking was compared with the result of the co-relation between the land value and factors influencing the land value of the real region, either similar or different results were shown.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.4
• /
• pp.148-159
• /
• 2021

This study estimates the region of freshwater influence (ROFI) by Han River discharge in the Yeomha channel, Gyeonggi Bay. A 3-D numerical model, which is validated for reproducibility of variation in current velocity and salinity, is applied in Gyeonggi Bay. Distance of freshwater influence (DOFI) is defined as the distance from the entrance of Yeomha channel to the point where surface salinity is 28 psu. Model scenarios were constructed by dividing the Han River discharge into 10 categories (200~10,000 m³/s). The relation equation between freshwater discharge and DOFI was calculated based on performing a non-linear regression analysis. ROFI in Yeomha channel expands from the southern sea area of Ganghwa-do to the northern sea area of Yeongheung-do as the intensity of Han River discharge increases. The discharge and DOFI are a proportional relationship, and the increase rate of DOFI gradually decreases as discharge increases. Based on the relation equation calculated in this study, DOFI in the Yeomha channel can be estimated through the monthly mean Han River discharge. Accordingly, it will be possible to respond and predict problems related to damage to water quality and ecology due to rapid freshwater runoff.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.161-166
• /
• 2005

Purpose : Electron is used for the treatment of skin cancer, breast cancer, and head and neck cancer in clinic. Our study is performed to check the isodose distribution in source surface distance(SSD)and source bolus distance(SBD)setup, nipple influence to isodose distribution of electron, junctional area isodose variation of photon and electron field. Materials and Methods : The electron dose distribution measures the diameter for 20 cm hemisphere paraffin phantom 2 made. It inserted the film between 2 paraffin phantom and it investigated it got radiation and dose distribution curve. Results : The 8% of isodose difference is with the surface distance(SSD)and source bolus distance(SBD)setup. The electon when the nipple exists inside the field, as nipple size it cuts the bolus and when it puts out and there is a possibility of getting the dose distribution which is homogeneous. When in the junction of electron and photon it uses the bolus it uses in the electron field whole, there is a possibility of getting the dose distribution which is homogeneous. Conclusion : The dose distribution decrease from the SBD setup. To reduce the influence of nipple, corresponding volume of bolus should be removed. And bolus covering all the electron field reduced hot and cold spot of junctional area of photon. In the future becomes the research which sees an effective electron therapy.

• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.17-27
• /
• 2010

With the development of modern society, there have been great technical advances, and the meaning, shape, and type of preservation objects have also become diverse. However, the legislation of executives established in 1961 has nt yet been revised realistically. Thatses administrative problems related to the usge and storage of explosives. In this study, the cases of civilian's question and thought that had been submitted to the government agency were surveyed. In order to analyze the effects of preservation object, ENPro3.1, which is a simulation program to analyze the sound pressure, was used to estimate the blast pressure when a magazine containing preservation objects exploded. With the damage due to the blast pressure, the problem with the safe distance depending on the preservation object levels was investigated. From the investigation, the blast pressures in the two cases with the artificial structures at the real distance 309 m and without the artificial structures at the legitimate standard space distance 440 m, were found to be 123 dB(L) and 138 dB(L), respectively. That means the influence of blast pressure in shorter distance with artificial structures is 15 dB(L) lower than longer distance without them. Therefore, it is recommended to apply the preservation distance based on the engineering analysis with a consideration of surrounding environment.

• Korean Journal of Organic Agriculture
• /
• v.14 no.2
• /
• pp.179-189
• /
• 2006

After examining the difference in the photosynthesis rate of corn according to the planting distance, the distance of $40{\times}40cm$ showed the lowest rate by 23 days after transplanting (May 31); however, there was no significant difference in the photosynthesis rate due to increased salt tolerance in the plant as time went by. As for the difference in growth features of a plant, the planting distance of $40{\times}40cm$ showed a growing disorder due to the influence of salt by 23 days after trans-plantation (May 31); however, there was a desirable growth as time went by. For the difference in the salt content within a plant, the planting distance of $40{\times}40cm$ tended to be higher than other planting distances, and the K+ content is much higher than other kinds of salt after examining the difference in salt absorption. As for the correlation between saline components within a plant, there was a significant negative correlation among $K^{+},\;Ca^{2+},\;and\;Na^{+}$ while there was a significant positive correlation among $Mg^{2+},\;Ca^{2+}$, and Na+. After examining the effectiveness of salt removal from soil according to com cultivation, the planting distance of $30{\times}30cm$ showed a remarkable decrease by 37 days, compared with 23 days, after transplantation in $K^{+}$ by 28%, $Ca^{2+}$ by 36.6%, $Mg^{2+}$ by 30.6%, and $Na^{+}$ by 22.9%. And the salt content is higher in surface soil than in subsoil.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.273-279
• /
• 2004

Recently, newly developed single high-intensity LED curing lights for composite resins are claimed to have a higher intensity than previous LED curing lights and to results in optimal properties and short curing time. The purpose of this study was to determine the curing effectiveness of the curing units and to evaluate the relationship between the degree of polymerization and distance from curing light tip end to resin surface. One composite resin was tested(Filtek Z250). Thin film specimens were cured with a LED curing unit(Elipar Freelight 2, 10s), Plasma Arc curing unit(Flipo, 6s), Halogen curing light(XL3000, 20s) at four curing light tip to the resin surface(0mm, 2mm, 4mm, 6mm). Degree of conversion of composite resins were determined by a Fourier Transform Infrared Spectrometer(FTIR). From the present study, the following results were obtained. 1. In all curing units, relative light intensity was significantly decreased according to the increase of distance of light tip to the resin surface(p<0.05). LED curing units showed a higher percentile decrease in intensity than other curing units. 2. In all curing units, degree of conversion was decreased as increase of the distance but no statistically significant difference(p>0.05) except between 4mm and 6mm(p<0.05). 3. When comparing degree of conversion of light curing units at each distance(0mm, 2mm, 4mm, 6mm), LED curing light had a higher degree of conversion than plasma arc and halogen curing lights at 0, 2, 4mm(p<0.05). At 6mm, there was a no significant difference among the curing units(p>0.05).

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.318-326
• /
• 2013

The effect of finger joint location and distance from joint to joint one another on 3 point mid-concentration bending strength properties was investigated in this experiment. Resorcinol-phenol formaldehyde (RPF) and aqueous vinyl urethane (AVU) was used to domestic Pinus densiflora Sieb. et Zucc and imported Picea sitchensis Carr. that have been cut to different width of 0.15 mm between finger tip and root width and the distance from loading point to finger joint was 0, 30, 40, 50, 60 mm. The effect was not found on the location and distance of finger joint for bending modulus of elasticity, while the efficiency of bending strength property increased proportionally as the location of finger joint from the load point and the distance between finger joint increased. No influence was shown by finger joint location and distance beyond 3 times of specimen thickness, since similar values were shown between the solid wood and no destruction occurred materials.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.41-48
• /
• 2014

Purpose - This study aims to investigate a solution to reduce the negative reactions arising from the performance of duties or the job distress of workers in the service industry, because human resource statistics regarding workers in the service sector have been unreported, while concerns regarding exposure to emotional exertion and poor working conditions have been continuously increasing. Research design, data, and methodology - This study specifically focused on workers in highway service areas. It differs from previous studies because it involves the perspective of the person-organization fit and regards workers' cognition of leaders through the psychological distance toward the leader and the contact frequency between workers and leaders within the framework of the leader-individual fit. Moreover, this study highlights the role of the self-leadership of workers as an important factor that becomes manifested in the individual-level fit to the organization. Hence, this study investigates whether the positive role of the above factors, in turn, could reduce job distress. Workers from highway service areas in Gyeonggi-do province provided data; 141 valid questionnaires are collected. SPSS 19.0 and AMOS 19.0 were used to test the reliability and validity of constructs. Simple regression, multiple regression, and 3 step mediation tests were used to test the hypotheses after the correlation tests. Results - Results indicated that leader-member contact frequency and psychological distance have negative effects on job distress but positive effects on self-leadership. A mediation test revealed that self-leadership, in the relationships between contact frequency and job distress and between psychological distance and job distress, resulted in partial mediation and full mediation, respectively. Conclusions - The result can be understood through two different possible explanations. First, service area workers generally possess a positive perspective toward their leaders. This can be interpreted to mean that increased contact frequency and psychological distance would be considered as supports from the leader, rather than intrusive controls or management schemes. Therefore, the management in highway service areas should invest efforts in increasing contact frequency as well as maximizing psychological similarities by adopting the viewpoints of workers in terms of moral and ethical management, to reduce the workers' job distress. The results relating to self-leadership also indicate that increased contact frequency must be accompanied by intentions for the effective promotion of workers' self-leadership. It also signifies the necessity of a strategic approach by leaders to induce workers to perceive "in-group"ness as suggested both by the similarity-attraction theory and by the social identity theory. In addition, the results of the mediation test of self-leadership indicate that because workers' self-leadership activates upon increased contact frequency by the leader, it should not be a means of control and should not be utilized only from the perspective of management. It is also suggested that strategies such as transfer of authority could have a positive effect in promoting the expansion of self-influence from workers.

• Journal of Gastric Cancer
• /
• v.6 no.4
• /
• pp.277-283
• /
• 2006

Purpose: The way in which the resection margin distance for gastric cancer patients who undergo a gastric resection influences the recurrence rate, aspects of recurrence, and the prognosis according to the characteristic of the tumor is not known. We aim to find a standard for tailor-made treatment after selecting patients in this point of view who need a more sufficient resection margin. Materials and Methods: A retrospective study was done on 1,472 patients who underwent a gastrectomy due to gastric cancer at our hospital from 1992 to 2005. The median follow-up period was 37 months. Results: There were no significant differences in the recurrence rate, the aspects of recurrence, and the 5-year survival rate between early gastric cancer (EGC) patients with a resection margin distance of less than 2 cm compared with EGC patients with a resection margin distance of greater than 2 cm. However, significant differences in the survival rate were found in advanced gastric cancer (AGC) patients when the patients were classified into groups with resection margin distances less than or greater than 3 cm (P=0.02). Significant differences were noted especially in cases of diffuse histologic-type tumors located in the lower third of the stomach and in cases with Borrmann type-3 and -4 tumors. Conclusion: The distance between the tumor resection margin and the proximal gastric resection margin has no significant influence on the survival rate in EGC patients if the resection margin is negative. However, to improve a patient's survival rate, it is important to guarantee a resection margin of more than 3 cm in AGC patients, especially when the tumor is a diffuse histologic type located in the lower third of the stomach or a Borrmann type 3 and 4.