• Clean Technology
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2023

The amount of hydrogen adsorbed in arrays of single walled carbon nanotubes (SWNTs) was studied as a function of nanotube diameter and distance between the nearest-neighbor nanotubes on square arrangements using a grand canonical Monte Carlo simulation. The influence of the geometry of a triangle array with the same diameters and distances was also studied. Hydrogen-carbon and hydrogen-hydrogen interactions were modeled with Lennard-Jones potentials for short range interactions and electrostatic interactions were added for hydrogen-hydrogen pairs to consider quantum contributions at low temperatures. At 194.5 K, Type I isotherms for large-diameter SWNTs and Type IV isotherms without hysteresis between adsorption and desorption processes for wider tube separations were observed. At 200 bars, the gravimetric hydrogen storage capacity of the SWNTs was reached or exceeded the US Department of Energy (DOE) target, but the volumetric capacity was about 70% of the DOE target. At 77 K, a two-step adsorption was observed, corresponding to a monolayer formation step followed by a condensation step. Hydrogen was adsorbed first to the inner surface of the nanotubes, then to the outer surface, intratubular space and the interstitial channels between the nanotube bundles. The simulation indicated that SWNTs of various diameters and distances in a wide range of configurations exceeded the DOE gravimetric and volumetric targets at under 1 bar.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.4
• /
• pp.71-83
• /
• 2010

In this study, the volume of shoreline retreat at sea-cliffs in the Taean peninsula(West Coast of Korea) was estimated and their erosion and seasonal landforms characteristics changes were investigated through multi-temporal aerial photographs and field survey. Based on the analysis of aerial photographs through ortho-correction, the results show that the length of shoreline and erosion area increase as erosion at sea-cliffs occurs in Pado-li and Dundu-li. To obtain the seasonal quantitative landforms changes and retreat of sea-cliffs, we marked top, middle, and bottom datum-points, from which the distance to the nearest bedrock was repeatedly measured. In these regions, the retreat of sea-cliffs gradually increases in spring to summer, but gradually decreases in autumn. In particular, the typhoon that has a great influence on the Korean peninsula in July to September in summer would drastically increase the retreat of sea-cliffs in comparison with other seasons. As the outcrop of sea-cliffs repeats freezing and thawing in winter, the retreat of sea-cliffs increases a little due to active mechanical weathering. To know the erosion and seasonal landforms changes of sea-cliffs, we took pictures of them in every month and then analyze their condition. The retreat of sea-cliffs was repeatedly occurred by the circulation of the erosion of sea-cliff base, landslides, the formation of slope sediment debris and their erosion, in that order.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.124-132
• /
• 2023

When the building becomes high, the number of households increases and they are adjacent to the elevator. So, frequency of use of elevators will increase. Elevator noise is bound to increase in the future. However, there are currently no legal standards for elevator noise or measurement and evaluation methods that can clearly measure elevator noise in Korea. Although some methods for measuring elevator noise are presented in KS F ISO 16032, this standard is not a standard established for elevator noise. It is a standard that integrates the overall measurement method of building equipment and equipment, and the position of the microphone is selected by the experimenter during measurement. Elevator noise is characterized by a low sound pressure level as the noise in the mid-low frequency band is important. However, even today, complaints from residents about elevator noise are increasing. In this study, the position of the microphone that can most sensitively pick up the elevator noise when measuring the elevator noise was studied. According to the distance from the wall and the height from the floor, a total of 9 microphone positions were measured and analyzed. As a result of the experiment, it was confirmed that the elevator noise has a very high influence in the 63 Hz band. The measured value at the center point was identified as a factor that lowered the overall elevator noise level value.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.325-333
• /
• 2023

This study compared and analyzed the microbial composition and physicochemical characteristics of kimchi (gimjang kimchi) and mukeunji (aged kimchi). Commercial kimchi and mukeunji products were purchased through an online market. After an analysis of physicochemical characteristics, the pH of the mukeunji samples was found to be lower and the acidity higher than in the kimchi samples. There was no significant difference in salinity between kimchi and mukeunji, but the sugar content was higher in the kimchi samples. The phylogenetic diversity index, which incorporates phylogenetic difference between species, was significantly higher in mukeunji than in the kimchi. The most dominant order in both groups was Lactobacillales, but several lactic acid bacteria, such as the Pediococcus and Lactobacillus species, which may be more acid tolerant or more competitive, are relatively predominant in mukeunji. Beta set-significance analysis based on two different distance metric results revealed that microbial distributions of population were different at the statistical confidence level (p<0.001). We investigated the effect of respective species on total microbial community using the LEfSe (linear discriminant analysis effect size) mechanism. According to the results of LEfSe testing, a relatively higher abundance of Weissella kandleri in kimchi and a higher abundance of Pediococcus inopinatus in mukeunji have the greatest influence on the differences in microbial structure between the two groups.

• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.150-160
• /
• 2022

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning. Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position. Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning. Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.669-676
• /
• 2023

This study analyzed the relationship between major parameters and numerical analysis results according to various excavations conducted around the urban railway, application of machine learning techniques and verified the scope of influence of the adjacent excavation on the existing urban railway box structure and the appropriateness of the safety area. This study targeted the actual negotiated adjacent excavation works and box structures around the urban railway, and the analysis was conducted on the most representative two-line box structures. The analysis confirmed that the difference in depth of urban railway, excavation depth of adjacent excavation, and depth of underground water level are important parameters, and the difference in excavation depth of adjacent excavation is the parameter that affects the behavior of underground box structures and is an important requirement for setting safety areas. In particular, the deeper the depth of the adjacent excavation work, the greater the effect on the deflection of the underground box structure, and the horizontal separation distance, one of the important requirements for determining the management grade of the existing adjacent excavation work, is relatively small.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1019-1023
• /
• 2006

The slope information based on DEM is very useful for urban planning, landscape, road design and water resource areas such as rainfall-runoff and soil erosion estimation. The resolution of slope, which is from DEM, can be variously decided by an application fields and the kinds of modeling method. In particular, the more decreased resolution makes the more decreased slope value because of the increased horizontal distance. This study presents slope evaluation method by aggregation method based on discharge and Manning's velocity equation to advance the loss of slope information in according to the resolution, and then applied it to calculate topographic factors of soil erosion model. As a result, conventional method shows 34.8% errors but aggregation method shows 12.6% errors. This study selected up-, middle-, and downstream region in watershed and analyzed the capability of aggregation method in order to estimate the influence of topographic characteristics. As a result of estimation, aggregation method shows more advanced results than conventional method. Therefore, the slope evaluation method by aggregation method can improve efficiently the loss of slope information in according to the variation of resolution in water resource area such as rainfall-runoff model.

• Korean Journal of Exercise Nutrition
• /
• v.16 no.2
• /
• pp.65-71
• /
• 2012

Oxygen is the final acceptor of electron transport from fat and carbohydrate oxidation, which is the rate-limiting factor for cellular ATP production. Under altitude hypoxia condition, energy reliance on anaerobic glycolysis increases to compensate for the shortfall caused by reduced fatty acid oxidation [1]. Therefore, training at altitude is expected to strongly influence the human metabolic system, and has the potential to be designed as a non-pharmacological or recreational intervention regimen for correcting diabetes or related metabolic problems. However, most people cannot accommodate high altitude exposure above 4500 M due to acute mountain sickness (AMS) and insulin resistance corresponding to a increased levels of the stress hormones cortisol and catecholamine [2]. Thus, less stringent conditions were evaluated to determine whether glucose tolerance and insulin sensitivity could be improved by moderate altitude exposure (below 4000 M). In 2003, we and another group in Austria reported that short-term moderate altitude exposure plus endurance-related physical activity significantly improves glucose tolerance (not fasting glucose) in humans [3,4], which is associated with the improvement in the whole-body insulin sensitivity [5]. With daily hiking at an altitude of approximately 4000 M, glucose tolerance can still be improved but fasting glucose was slightly elevated. Individuals vary widely in their response to altitude challenge. In particular, the improvement in glucose tolerance and insulin sensitivity by prolonged altitude hiking activity is not apparent in those individuals with low baseline DHEA-S concentration [6]. In addition, hematopoietic adaptation against altitude hypoxia can also be impaired in individuals with low DHEA-S. In short-lived mammals like rodents, the DHEA-S level is barely detectable since their adrenal cortex does not appear to produce this steroid [7]. In this model, exercise training recovery under prolonged hypoxia exposure (14-15% oxygen, 8 h per day for 6 weeks) can still improve insulin sensitivity, secondary to an effective suppression of adiposity [8]. Genetically obese rats exhibit hyperinsulinemia (sign of insulin resistance) with up-regulated baseline levels of AMP-activated protein kinase and AS160 phosphorylation in skeletal muscle compared to lean rats. After prolonged hypoxia training, this abnormality can be reversed concomitant with an approximately 50% increase in GLUT4 protein expression. Additionally, prolonged moderate hypoxia training results in decreased diffusion distance of muscle fiber (reduced cross-sectional area) without affecting muscle weight. In humans, moderate hypoxia increases postprandial blood distribution towards skeletal muscle during a training recovery. This physiological response plays a role in the redistribution of fuel storage among important energy storage sites and may explain its potent effect on changing body composition. Conclusion: Prolonged moderate altitude hypoxia (rangingfrom 1700 to 2400 M), but not acute high attitude hypoxia (above 4000 M), can effectively improve insulin sensitivity and glucose tolerance for humans and antagonizes the obese phenotype in animals with a genetic defect. In humans, the magnitude of the improvementvaries widely and correlates with baseline plasma DHEA-S levels. Compared to training at sea-level, training at altitude effectively decreases fat mass in parallel with increased muscle mass. This change may be associated with increased perfusion of insulin and fuel towards skeletal muscle that favors muscle competing postprandial fuel in circulation against adipose tissues.

• Communications of Mathematical Education
• /
• v.37 no.4
• /
• pp.635-652
• /
• 2023

This study conducts a comprehensive analysis of the curricular progression of the concepts and learning sequences of 'lines', specifically, 'line segments', 'straight lines', and 'rays', at the elementary school level. By examining mathematics curricula and textbooks, spanning from 2nd to 7th and 2007, 2009, 2015, and up to 2022 revised version, the study investigates the timing and methods of introducing these essential geometric concepts. It also explores the sequential delivery of instruction and the key focal points of pedagogy. Through the analysis of shifts in the timing and definitions, it becomes evident that these concepts of lines have predominantly been integrated as integral components of two-dimensional plane figures. This includes their role in defining the sides of polygons and the angles formed by lines. This perspective underscores the importance of providing ample opportunities for students to explore these basic geometric entities. Furthermore, the definitions of line segments, straight lines, and rays, their interrelations with points, and the relationships established between different types of lines significantly influence the development of these core concepts. Lastly, the study emphasizes the significance of introducing fundamental mathematical concepts, such as the notion of straight lines as the shortest distance in line segments and the concept of lines extending infinitely (infiniteness) in straight lines and rays. These ideas serve as foundational elements of mathematical thinking, emphasizing the necessity for students to grasp concretely these concepts through visualization and experiences in their daily surroundings. This progression aligns with a shift towards the comprehension of Euclidean geometry. This research suggests a comprehensive reassessment of how line concepts are introduced and taught, with a particular focus on connecting real-life exploratory experiences to the foundational principles of geometry, thereby enhancing the quality of mathematics education.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.102-109
• /
• 2023

In realizing a hydrogen society, it is important to secure the safety of the hydrogen refueling station, which is the facility where consumers can easily meet hydrogen. The hydrogen refueling station consists of compressed gas facilities that store high-pressure hydrogen, and there is a risk that the high-pressure compressed gas facility will rupture due to a fire explosion due to hydrogen leakage in the facility or the influence of surrounding fires. Accordingly, the Korea Gas Safety Corporation is making every effort to find out risk factors from the installation stage, reflect them in the design, and secure safety through legal inspection. In this study, a TNT explosion demonstration test using a protection wall was conducted to confirm the safety effect of the protection wall installed at the hydrogen refueling station, and the empirical test results were compared and verified using FLACS-CFD, a CFD program. As a result of the empirical test and CFD analysis, it was confirmed that the effect of reducing the explosion over-pressure at the rear end of the protection wall decreased from 50% to up to 90% depending on the location, but the effect decreased when it exceeded a certain distance. The results of the empirical test and computer analysis for verifying the safety of the protection wall will be used in proposals for optimizing the protection wall standards in the future.