• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.169-173
• /
• 2010

Because of power consumption increase, global warming, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. In this paper, E field calculation and experiment were processed to identify the influence of the shape of end shield and gap distance. It is expected that the results of FEM simulation and experiments could be the basic data to develop VI. the results of FEM simulation and experiments are as following. Firstly, maximum E fields were compared by means of finite element method as a function of the shape of end shield. 3 types of models were used to analyze maximum E field of each model and the influence of shape of shield could be identified. As a result, proposed L type shield could reduce the maximum E field by 20%. Secondly, the influence of the gap distance between end shields on E field was analyzed. As the gap distance become short the gap distance between inner walls of ceramic also become short. And the maximum E field concentrated on inner wall of ceramic finally increased. Thirdly, the experiment was conducted by fabricating each prototype. As a result, no creepage occurred in shieldless model. In other words, creepage occurred in the shield-installed models. And creepage inception voltages were different from each other because of the difference of maximum E field. Fourthly, The equation that shows relation between calculated E field and measured creepage inception voltage was proposed as a result of FEM analysis and experiment. It is concluded that when designing VI this equation could be important data to reduce time and cost by identifying indirectly the optimal gap distance and the shape of shield required to prevent creepage.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.76-87
• /
• 1998

The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

• 한국IT서비스학회지
• /
• 제19권5호
• /
• pp.107-124
• /
• 2020

Due to spread of covid-19, which began in December 2019, the usage of online distance learning has expanded within colleges. However, because of the lack of readiness for running online distance learning, professors and students had to experience a lot of inconvenience. In the near future, the usage of online distance learnig is expected to more expand, thus, it seems that there should be a strategies for sustainable online learning operations. This study aims to investigate which factors have impact on the continuance intention to usage of online distance learning of airline department students, focused on Post-Acceptance Model. For the empirical analysis, this study utilized a structural equation model after collecting 136 survey data. The results is as follow; First, user interface has positive impact on confirmation and confirmation has positive impact on satisfaction of online distance learning. Seconds, confirmation has positive impact on perceived usefulness, flow and social presence. Third, social presence has positive impact on satisfaction of online distance learning, but perceived usefulness and flow didn't have statistically meaningful impact on satisfaction. Finally, statisfaction of online distance learning has huge positive impact on continuance intention to usage. It is expected that the implications of this study enable colleges effectively to run online distance learning in preparation for the post-covid 19 era.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.886-898
• /
• 1995

One of the ways to measure the distance in the computer vision is to use the focus and defocus. There are two methods in this way. The first method is caculating the distance from the focused images in a point (MMDFP: the method measuring the distance to the focal plane). The second method is to measure the distance from the difference of the camera parameters, in other words, the apertures of the focal planes, of two images with having the different parameters (MMDCI: the method to measure the distance by comparing two images). The problem of the existing methods in MMDFP is to decide the thresholding vaue on detecting the most optimally focused object in the defocused image. In this case, it could be solved by comparing only the error energy in 3x3 window between two images. In MMDCI, the difficulty is the influence of the deflection effect. Therefor, to minimize its influence, we utilize two differently focused images instead of different aperture images in this paper. At the first, the amount of defocusing between two images is measured through the introduction of regularization and then the distance from the camera to the objects is caculated by the new equation measuring the distance. In the results of simulation, we see the fact to be able to measure the distance from two differently defocused images, and for our approach to be robuster than the method using the different aperture in the noisy image.

• 대한전자공학회논문지SP
• /
• 제37권6호
• /
• pp.38-47
• /
• 2000

Bhattacharyya distance는 패턴 분류 문제에 있어서 클래스간 분리도 측정의 수단으로 사용되어 왔으며 특징 추출 시 유용한 정보를 제공한다. 본 논문에서는 최근 발표된 Bhattacharyya distance를 이용한 에러 예측 기법을 이용하여 예측된 분류 에러가 최소가 되는 특정 벡터를 추출하는 방법에 대하여 제안한다. 제안한 특징 추출 기법은 최적화 알고리즘인 전체탐색 및 순차탐색 방법의 적용 시 분류 에러를 직접 구하지 않고 Bhattacharyya distance를 이용하여 분류 에러를 예측하므로 고차원 데이터의 경우 고속의 특징 추출이 가능하며, 에러 예측 성질을 이용하여 패턴 분류 시 필요한 최소 특징 벡터의 수를 예측할 수 있는 장점이 있다.

• 한국안광학회지
• /
• 제18권4호
• /
• pp.495-501
• /
• 2013

목적: 본 연구는 망원경과 바이프리즘(biprism)을 이용하여 골퍼로부터 깃대까지의 거리를 정확히 측정할 수 있는 골프 거리측정기를 개발하기 위한 것이다. 방법: 망원경내부에 이동 가능한 바이프리즘을 포함시켜 골프거리측정기를 제작하였으며. 20~200 m 거리에서 제작된 거리측정기의 정확도를 분석하였다. 결과: 바이프리즘의 위치에 따라 거리를 계산할 수 있는 방정식을 유도하였으며 개발된 골프거리측정기를 이용하여 성공적으로 거리를 측정할 수 있었다. 2 ${\Delta}$의 바이프리즘이 짧은 거리의 측정에서는 유용했지만 먼 거리의 측정에서는 정확도가 떨어지는 것으로 나타났으며 먼 거리의 측정에는 0.5 ${\Delta}$이 더 유용한 것으로 나타났다. 먼 거리를 측정하기 위하여 바이프리즘이 대물렌즈의 초점부근으로 접근할 때 상이 나빠지는 현상이 나타났으며, 이러한 약점을 보완하기 위하여 다층형 바이프리즘을 개발하였다. 결론: 바이프리즘을 이용하여 손떨림에 구애받지 않고 거리를 잘 측정할 수 있었으며 유도한 거리계산 방정식이 유용함을 확인하였다. 먼 거리를 측정하기 위하여 바이프리즘이 대물렌즈의 초점부근으로 접근했을 때 새로이 고안된 다층형 바이프리즘이 일반적인 바이프리즘보다 유용하다는 것을 확인하였다.

• 교육시설
• /
• 제3권1호
• /
• pp.19-30
• /
• 1996

Integrated Services Digital Networks (ISDNs) and Broadband ISDN provide high speed data transmission capabilities and therefore, it is now possible to communicate with multimedia information including graphic, motion image, data and audio. Among several new services utilizing multimedia communication networks, distance education service which aims to overcome time and space restrictions between teachers and learners is now heavily focused in many countries. In this paper, several factors which affect to the effectiveness of distance education are surveyed and facilities for organizing distance education classrooms which utilize high speed multimedia communication network are studied in detail. Also, some points are suggested for organizing successful distance equation system based on the multimedia communication technology.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.652-665
• /
• 2019

Analytical solutions of the reactant concentration inside porous spherical catalytic particles were obtained from unsteady reaction-diffusion equation by applying eigenfunction expansion method. Various surface concentrations as exponentially decaying or oscillating function were considered as boundary conditions to solve the unsteady partial differential equation as a function of radial distance and time. Dirac delta function was also used for the instantaneous injection of the reactant as the surface boundary condition to calculate average reactant concentration inside the particles as a function of time by Laplace transform. Besides spherical morphology, other geometries of particles, such as cylinder or slab, were considered to obtain the solution of the reaction-diffusion equation, and the results were compared with the solution in spherical coordinate. The concentration inside the particles based on calculation was compared with the bulk concentration of the reactant molecules measured by photocatalytic decomposition as a function of time.

• Journal of Photoscience
• /
• 제8권1호
• /
• pp.33-37
• /
• 2001

Picosecond absorption spectroscopy has been employed in the study of the solvent dynamics of 1, 2, 4, 5-tetracyanobenzene/biphenyl derivative radical ion pairs, and the resulting rates of radical ion pair separation are faster in acetonitrile than in dichloromethane. In an effort to account quantitatively for such solvent effect on the rate of radical ion pair separation, an equation for the rate of radical ion pair separation is introduced, in which the rate depends exponentially on the electrostatic interaction energy in the radical ion pair. In our analysis of the types of electrostatic interaction energy based on the conducting spheres in dielectric continuum was chosen, and the rate equation employing this electrostatic energy provided information on the distance on the distance of radical ion pair separation and solvation energy of the radical ion pair, thereby providing quantitative explanation for the observed solvent effect on the rate of radical ion pair sepaaration.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.264-270
• /
• 2006

In this research, volume reduction of activated sludge using electrolysis was studied to find an optimum condition using lab scale experiments. Wasted sludge was treated by electrolysis with controlling current density, chloride concentration, electrode distance, and reaction time. Volume of return sludge was reduced by 9.79% in average while maximum was 16.7%. Sludge volume reduction efficiency was affected by current density and reaction time. It was reversely proportional to the electrode distance. Especially current density was effective on the system performance significantly. Electric conductivity, salinity and COD were increased by electrolysis implying sludge disintegrated and converted to COD in part. An empirical equation for total solid removal efficiency by electrolysis was proposed by multiple linear regression analysis as: $TS_{rem}$(%) = 5.534 ${\times}$ current density (A/l) + 0.178 ${\times}$ reaction time (m) + 2.758.