• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.386-392
• /
• 2002

In this paper, we propose a novel blocking effect reduction method based on a rational B-spline. The blocking effect results from independent coding of each image block and becomes highly visible especially coded at very low bit rates. The proposed approach adopts a rational open uniform B-spline curve that used to produce a smooth curve through a set of control points. The pixels on the block boundary are treated as control points, and the weight values, which decide the shape of curve, are determined differentially by considering the distance the position of the pixels and that of the block boundary. The simulation results show that the proposed method has excellent performance for all pattern of the blocking effect with less computational complexity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.447-454
• /
• 2017

Using two large coast guard ships at sea, we created four encounter situations ($000^{\circ}$, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$) with high possibility of collision, from 3 NM up to 0.25 NM. As relative distance was gradually decreased, the subjects were measured at 0.25 NM intervals and perceived ship collision risk (PSCR) was determined by looking at the opponent ship. Characteristics were statistically analyzed using the obtained data. The purpose of this study was to analyze the characteristics of collision risk values obtained from twelve intervals, from 3 NM to 0.25 NM relative to encounter situations by curve fitting with appropriate polynomials, to determine the distance from which the change in perceived collision risk is greatest. As a result, an optimal regression equation for each distance interval was derived from each analysis direction. The greatest variation in average collision risk value was over the range 1.25 ~ 1 NM, and the collision risk value was largest at 1 NM. The maximum change in perceived collision risk was at 1 NM. These results can contribute to preventive guidelines to minimize human error in close proximity situations with a high probability of ship collision.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.51-57
• /
• 2010

Brittle microstructure created in a heat affected zone (HAZ) during the welding of low alloy steel can be eliminated by post-weld heat treatment (PWHT). If the PWHT is not possible during a repair welding, the controlled bead depositions of multi-pass welding should be applied to obtain tempering effect on the HAZ without PWHT. In order to anticipate and control the tempering effect during the temper bead welding, the definition of temperature curve obtained from the analytical solution was suggested in this research. Because the analytical solution for heat flow is expressed as a mathematical equation of weld parameters, it may be effective in anticipating the effect of each weld parameter on the tempering in HAZ during the successive bead depositions. The reheating effect by the successive bead layer on the brittle coarse grained HAZ formed by earlier bead deposition was estimated by comparing the overlapped distance between the temperature curves in the HAZ. Three layered weld specimens of SA508 base metal with A52 filler were prepared by controlling heat input ratio between layers. The tempering effect anticipated by using the overlapped distance between the temperature curves was verified by measuring the micro-hardness distribution in the HAZ of prepared specimens. The temperature curve obtained from analytical solution was expected as a good tool to find optimal temper bead welding conditions.

• 공원문화
• /
• s.26
• /
• pp.26-32
• /
• 1984

There have been few researches on the factors affecting forest recreation demand and demand for and value of forest recreation in Korea. This study has three main objectives as follows; First, to introduce the nature of recreation demand, the factors affecting forest recreation demand, and the methods of measuring demand for and benefits from forest recreation by reviewing related literatures. Secondly, to investigate the visitors' characteristics, patterns of recreation activities, and their attitudes for the recreation environments at the Deogyu National Park through interviewing them with the questionaire. Thirdly, to estimate the demand for and benefits of forest recreation at the National Park by Travel Cost Method. The survey was dealt by three trained interviewers at the enterance of the park for 5 days from September 26 to October 10, 1982. The 430 respondents were sampled randomly among 9,391 visitors with 4.6% of sampling rate. As the results, the study revealed that most of visitors to Deogyu National Park were from urban areas and belonged to the intermediate-upper income classes, and that most of them traveled more than 250 km or 4 hours to the site from their origins. And more respondents answered that the recreation environments of the cite were more or less better than other recreation areas. From the date of travel distances and participation rates of 13 cities or counties, the demand schedule of forest recreation at the National Park was established. The estimated equation of total experience demand curve is; Log $VR_i$ 2.6353 – 1.021 Log $D_i$ $R^2=0.9451$ where, $VR_i$ $(%\times1000)$ = Participation rate of the ith origin $D_i$ (km) = Travel distance from the ith origin From the total experience demand curve, the demand curve of recreation resources was built by adding travel cost in distance (km). The regression equation of the recreation resources at the Nation park is; Log V = 4.0304 – 0.8167 Log D $R^2=0.9060$ From the demand schedule of recreation resources, the recreational bendfits of Deogyu National Park was estimated. The estimated bendfits to a visitor from the forest is equivalent to the travel cost of 2,372 km. The study also found out that the demand for recreation resources was less elastic than the demand for the total recreation experience at the Deogyu National Park.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.5
• /
• pp.181-188
• /
• 2022

In this paper, we proposed of the results of the noise level and appropriate conversation distance by applying the noise characteristics generated during treatment at a dental clinic to the NR-curve and PSIL. As a result of analyzing the noise characteristics during treatment at a dental clinic, it was analyzed that the noise level exceeded 60dB(A), which is the health preservation limit value caused by noise, and the noise level increased as the frequency increased. the result of evaluation applying it to the NR curve, some treatment exceeded the workplace noise standard, and as a result of analyzing the level of conversational disturbance between the worker and the patient, it is desirable to have the conversation at a distance of less than 1M for accurate communication. In order to improve the quality of medical service in dental clinic and to reduce dental fear, it is judged that soundproofing protective equipment is provided to workers, and soundproofing measures are needed for noise sources (treatment devices used in treatment) and sound sources (patients and workers).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2516-2523
• /
• 2013

Noise occurred when medical treatment in dental clinic will affect the patients. This study was measured the noise level and frequency in case of medical examination and also has evaluated the degree of indoor noise using the NR-curve, NRN and a distance to conversation between worker and patients using the PSIL. It shows that noise level was 69.3~81.5dB(A) and frequency was very high (more than 4K(Hz)) and analysis by NR-curve showed that it was exceed the noise permit level and distance to conversation was less than 1meter by PSIL. To remedy a fear of noise in patients and provide a conversational satisfaction, it's considered that choosing the low noise-vib. equipment, using the masking effect and set the room to explain. So It is possible to improve their competitiveness.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.55.2-56
• /
• 2021

The progenitor of Type Ia supernovae (SNe Ia) is mainly believed to be a close binary system of acarbon-oxygen white dwarf (CO WD) and non-degenerate companion (single degenerate) or another WD (double degenerate). However, it is unclear which system is more prevalent. Here, we present a high cadence optical/Near-IR light curve of normal but slightly faint type Ia SN 2019ein from IMSNG project. We fit the early light curve (t <+8.3 days from the first detection) with various models to find the shock-heated cooling emission from SN ejecta-companion interaction. No significant shock-heated cooling emission is found, from which we constrain the progenitor star size as the following. The upper limit (R_upper,*) of the companion size in R-band is ~0.2R_⊙ when forcing the first light time (t_fl) to have one value and ~0.9R_⊙ when using the mean value of tfl from the fitting in each band. Assuming the source of the I-band curve is almost powered from the radioactive decay, we obtained R_upper,*~1.2R_⊙. The early B-V color curve is in agreement with the model color curve of the 2M_⊙ main sequence companion. These results allow us to at least rule out large stars like red giants as a companion star of the binary progenitor system of this supernova. B-R and V-R color do not show any significant signs of a red bump, which shows a thin helium shell (MHe<0.1M_⊙) for the sub-Mch WD (double detonation model). In addition, we estimated the distance to NGC 5353 as 37.098±0.028Mpc.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.25-33
• /
• 2000

This study represents three-dimensional turbulent flow characteristics around an axial fan measured at the operating point ${\varphi}=0.32$, which is equivalent to the maximum flowrate region, by using three-dimensional fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fog is used for laser particles in this study. Mean velocity profiles around an axial fan along the downstream radial distance show that the streamwise and the tangential components exist as a predominant velocity and have the maximum value at the radial distance ratio 0.8, while the radial component has a small scale distribution and its flow direction is inward except a part of blade tip. The turbulent intensity profiles show that the radial component exists the most greatly. And also the turbulent kinetic energy shows about 60% as a maximum value at the radial distance ratio 0.9. Moreover, the Reynolds shear stresses do not exist at upstream flow, but the streamwise and the radial components of them show about 20% as a maximum value at the radial distance ratio 0.9 at downstream flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1395-1405
• /
• 1996

The purpose of this experimental research is to investigate the local heat transfer characteristics in the upward free water jet impinged on a downward flat plate of uniform heat flux. The inner shape of rectangular nozzle used was sine curve type and its contraction ratio of inlet to outlet area was five. Experimental parameters considered were Reynolds number, nozzle exit-flat plate distance, and level of supplementary water. Local Nusselt number was influenced by Reynolds number, Prandtl number, supplementary water level, and distance between the nozzle exit and flat plate. Within the impingement region, the Nusselt number has a maximum value on the nozzle center axis and decreases monotonically outward from center. Outside of the impingement region, on the other hand, the Nusselt number has a secondary peak near the position where the distance from nozzle center reaches four times the nozzle width. However if nozzle exit velocity exceeds 6.2 m/s, the secondary peak appears also in the impingement region. The empirical equation for the stagnation heat transfer is a function of Prandtl, Reynolds, and axial distance from the nozzle exit. The optimum level of supplementary water to augment the heat transfer rate at stagnation point was found to be twice the nozzle width.