• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.257-258
• /
• 2006

This paper presents the displacement sensor based on astigmatic method that has a small measurement range. The sensor has the characteristic that the measuring range is changed easily by exchanging a objective lens or distance between a objective lens and a collimator lens. The measuring range and resolution is evaluated by a laser interferometer.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.711-717
• /
• 2007

Location information will become increasingly important for future Pervasive Computing applications. Location tracking system of a moving device can be classified into two types of architectures: an active mobile architecture and a passive mobile architecture. In the former, a mobile device actively transmits signals for estimating distances to listeners. In the latter, a mobile device listens signals from beacons passively. Although the passive architecture such as Cricket location system is inexpensive, easy to set up, and safe, it is less precise than the active one. In this paper, we present a passive location system using Cricket Mote sensors which use RF and ultrasonic signals to estimate distances. In order to improve accuracy of the passive system, the transmission speed of ultrasound was compensated according to air temperature at the moment. Upper and lower bounds of a distance estimation were set up through measuring minimum and maximum distances that ultrasonic signal can reach to. Distance estimations beyond the upper and the lower bounds were filtered off as errors in our scheme. With collecting distance estimation data at various locations and comparing each distance estimation with real distance respectively, we proposed an equation to compensate the deviation at each point. Equations for proposed algorithm were derived to calculate relative coordinates of a moving device. At indoor and outdoor tests, average location error and average location tracking period were 3.5 cm and 0.5 second, respectively, which outperformed Cricket location system of MIT.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.1-5
• /
• 2008

There is a need to enlarge the mother glass substrate in OLED to raise its productivity and to realize OLED TV. On the other hand, some difficulties may arise regarding the deflection of a large glass substrate during its handling operation due to its thinness $(0.5\sim0.7t)$, which is not even enough to allow it to stand its own mass. This thesis proposes a conceptual plan for the application of the clamping- and bending-end conditions to the glass substrate handler. To verify proposed plan, the non-contact 3 dimensional measuring instrument is developed. The composition of the 3 dimensional measuring instrument measures shape of the product using X-Y stage robot and laser distance sensor. X-Y stage robot and laser distance sensor are controlled by LabVIEW language. To calibrate measuring instrument, the direction conversion of the Euler angle was used. In order to confirm deflection of the glass substrate, the experiment was carried out at the bending end boundary condition and the proposed effect was verified.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.103-109
• /
• 2015

This paper introduces a multi-purpose smart fusion sensor. Normally, this type of sensor can contribute to energy savings specifically related to lighting and heating/air conditioning systems by detecting individuals in an office building. If a fire occurs, the sensor can provide information regarding the presence and location of residents in the building to a management center. The system consists of four sensors: a thermopile sensor for detecting heat energy, an ultrasonic sensor for measuring the distance of objects from the sensor, a fire detection sensor, and a passive infrared sensor for detecting temperature change. The system has a wireless communication module to provide the management center with control information for lighting and heating/air conditioning systems. We have also demonstrated the usefulness of the proposed system by applying it to a real environment.

• 융합보안논문지
• /
• 제6권3호
• /
• pp.37-47
• /
• 2006

본 논문에서는 필립스사의 지자기센서를 블루투스 통신시스템에 연결하여 방위각을 $5^{\circ}$ 단위로 전후 방향으로 기울기 각도를 변화시켜 $360^{\circ}$를 측정하였다. 측정된 방위값은 100M 이내에서 이동하면서 측정값을 블루투스 통신시스템으로 전송하여 측정값을 분석하였다. 블루투스를 이용하여 전파 장애가 없는 평지에서 직선거리 100M 이내에서 방위 측정값은 에러 없이 전송할 수 있었다. 지자기센서를 수평을 유지하면 98%의 신뢰를 가지는 방위측정값을 얻었다. 본 연구를 바탕으로 기울기를 가지는 지형을 이동하는 이동형 지능로봇에 장착 정확도가 향상된 방위 측정값을 전송하여 이동형 로봇의 방위추적을 할 수 있다.

• 센서학회지
• /
• 제23권1호
• /
• pp.46-50
• /
• 2014

In this paper, we report a novel algorithm based on phase displacement, which supplements conventional TOF methods for distance measurement using an ultrasonic wave. The proposed algorithm roughly measures the distance between the transmission part and the receiving part by using the initial TOF. Thereafter, the precise distance is determined by measuring the phase displacement value between the synchronizing transmission signal and the signal obtained at the receiving end. A distance measurement experiment using a micrometer was performed to verify the accuracy of the ultrasonic wave sensor system. We found that the mean errors from the one adopting the distance measurement algorithm based on phase displacement varied from a minimum of 0.03 mm to a maximum of 0.09 mm. In addition, the standard deviation varied from a minimum of 0.04 mm to a maximum of 0.07 mm, thus giving a precision of ${\pm}0.1$ mm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.70-74
• /
• 1998

This paper describes a method for recognition of two-dimensional position of an object by use of aerial ultra-sonic sensor and signal processing technique, which would become a help for blind person or self-mobile robot. First, we have developed a method for measuring the time difference between the transmitted and the received burst wave by use of one ultrasonic transmitter and three receivers. Secondly, a new method is developed for measuring the distance to an object by use of M-sequence correlation method. Thirdly, a measurement method to obtain the position of an object is described by use of phase-arrayed ultrasonic sensor, which gives us a wide-range position determination in a short time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.5-53
• /
• 2001

In continuous galvanizing process at steel making plant, coating weight on the surface of strip that pass through air knife is controlled by the pressure at the chamber of air knife and the gap between the nozzle of air knife and strip. The pressure can be easily measured and controlled. But it is difficult to measure the distance between Air knife nozzle and strip, and also difficult to decide how much distance air knife move. Because, the gap between nozzle and strip varies with the height of air knife, intermesh of stabilizing roll and welding of strips that have different thickness. In this research, we developed a gap sensor that can measure the relative distance between Air knife nozzle and strip. And several tests are performed to find optimal condition for application at real plant. We performed test in which the possibility of the sensor to apply ...

• 한국광학회지
• /
• 제32권2호
• /
• pp.79-85
• /
• 2021

본 논문에서는 빔 확산각 최소화를 통해 장거리에서 측정이 가능하도록 한 ToF 레이저 거리센서 광학계 설계에 대한 연구를 진행하였다. 거리센서는 장거리 측정 시 거리가 멀어질수록 레이저 빔의 확산각으로 인해 물체 표면에 도달하는 빔의 광량이 급격히 저하되며, 이로 인해 센서에 수신되는 광량도 감소되어 측정이 되지 않거나 측정 오차가 발생하게 된다. 일반적으로 빔 확산각을 최소화하는 광학계로 실린더 렌즈가 사용된다. 그러나 실린더 렌즈를 이용한 광학계는 광학계 크기가 커지는 문제뿐만 아니라 조립 공차의 어려움으로 인해 성능이 저하된다는 문제점이 있어 최근 비구면 렌즈를 사용하는 추세가 증가하고 있다. 따라서 본 연구에서는 실린더 렌즈를 이용한 광학계와 비구면 렌즈를 이용한 광학계의 광효율과 조립공차를 비교 분석하고자 한다.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.15-24
• /
• 2007

본 연구에서는 여러 지점의 온도를 동시에 측정할 수 있는 두 가지 온도 모니터링 기법을 소개하고 있다. 그 하나는 고유주소를 가지고 있는 온도센서로 구성된 온도센서 배열 케이블을 이용하는 기법이며, 다른 하나는 광섬유 센서를 이용하여 분포 온도를 측정하는 기법이다. 이 두 기법의 차이점은 다음과 같이 요약될 수 있다. 온도센서 배열 케이블은 온도센서가 위치하는 정확한 지점의 온도를 측정하게 된다. 그에 대한 온도 측정의 정밀도 및 분해능은 그 온도 센서의 성능에 따라 결정된다. 한편, 광섬유 센서는 레이저 펄스가 광섬유를 따라 보내질 때 생성되는 Raman 역산란파를 분석함으로써 온도를 측정하기 때문에 분포 개념의 온도를 측정하게 된다. 그에 대한 온도 분해능은 측정거리, 측정시간 및 온도측정 거리분해능에 따라 결정된다. 본 논문은 두 가지 온도 모니터링 시스템의 장단점을 비교함으로써 기술적이고 경제적인 측면에서 그의 응용분야를 면밀히 검토하는 데 그 목적이 있다. 이를 위해 두 기법을 이용한 다양한 실험을 실시하였다. 그 결과를 검토해 보면 온도센서 배열 케이블은 300m 범위 내의 지하수 흐름, 지열 분포 및 그라우팅 효과 검증에 적합할 것으로 판단되며 광섬유 센서는 상대적으로 긴 거리에 걸친 분포 온도에 대한 정보가 필요한 파이프 파인 감시, 터널 화재 감시 및 전력선 모니터링과 같은 분야에서 효율적으로 활용될 것이 기대된다.