• The Journal of the Acoustical Society of Korea
• /
• 제15권1E호
• /
• pp.29-33
• /
• 1996

A categorization for cluster is necessary when an unsupervised classfication is used for remote sensing image classification. It is desirable that this method is performed automatically, because manual categorization is a highly time consuming process. In this paper, several automatic determination methods were proposed and evaluated. They are four methods. a) maximum number method : which assigns the tharget cluster to the category which occupies the largest area of that cluster b) maximum percentage method : which assigns the target cluster to the category which shows the maximum percentage within the category in that cluster. c) minmun distance method : which assigns the target cluster to the category having minmum distance with that cluster d) element ratio matching method : which assigns local regions to the category having the most similar element ratio of that region From the results of the experiments, it was certified that the result of minimum distance method was almost the same as the result made by a human operator.

• 한국측량학회지
• /
• 제9권1호
• /
• pp.55-61
• /
• 1991

수평각 관측에 있어서 관측값에 미치는 영향은 우연오차인 시준오차 및 읽기오차 뿐만 아니라 구심오차도 이에 수반된다. 따라서 본 연구에서는 위의 오차중 구심오차가 관측값에 미치는 영향을 검토하기 위하여 구심오차의 이론식 및 평가식을 유도하고 이를 이용 관찰 시험관측을 통하여 고찰해보았다. 본 연구결과 구심오차는 시준거리, 관측각, 편심거리 및 편심각을 알므로서 산출되고, 3배각수로 관측함이 오차가 작아 실용적이며, 또한 기기의 성능에 따라 시준거리 및 관측각을 이용하여 그 평가가 가능하다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.601-603
• /
• 2004

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT -2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of $20\%$ over the mission lifetime of 3 years with the functions of programmable gain! offset and onboard image data compression/storage. MSC instrument has one(1) channel for panchromatic Imaging and four(4) channel for multi-spectral Imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the configuration, the interface of MSC hardware and the MSC operation concept are described. And the method of the MSC calibration are described and the design of MSC calibration operation to measure the change of MSC after Launch & Early Operation(LEOP) and normal mission operations are discussed and analyzed.

• 대한지구과학교육학회지
• /
• 제5권1호
• /
• pp.1-7
• /
• 2012

The purpose of this study was to restore So-ganui(小簡儀), which is a unique astronomical instrument during Sejong period, so that its educational application can be sought. To achieve it, researcher researched the observation principle of our ancestors and the structure of So-ganui, and then restored So-ganui. The result is as following. First, So-ganui is the astronomical observation instrument which can not only measure the position of the celestial bodies in terms of function but also find out the height and distance of topography, and get the time. Second, restoration So-ganui is suitable for the students to learn as an inquiry activity of the observation information in the science curriculum and it would be used as the learning materials for the proper understanding of the science and measurement principle of our ancestors. This study would contribute to raising the level of pride in our scientific culture for the students and succeed the heritage of the science and culture.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.615-618
• /
• 2016

This paper proposes a method to estimate vertical interaction force to the end of the surgical instrument by measuring reaction force at the part supporting the trocar. Relation between the force to the trocar and the interaction force is derived using the beam theory. The vertical interaction force is modeled as a function of the reaction force to the trocar and the distance between the drape plate and the trocar. Experimental results show that error is induced by the asymmetric shape of the trocar tip because contact position between the instrument and the trocar tip is changed depending on the direction of the interaction force. The theoretical relation, therefore, is compensated and reduced. Average $L_2$ relative error of the estimated force in the x-direction and the y-direction is 5.81 % and 5.99 %, respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.

• 대한원격탐사학회지
• /
• 제22권4호
• /
• pp.255-264
• /
• 2006

2002년 3월에 발사 된 GRACE (Gravity Recovery and Climate Experiment)는 미국과 독일 합작으로 개발된 최초의 지구중력장 측정 전용 위성으로 동일한 궤도를 비행하는 두 개의 위성 사이 거리 변화를 측정하여 지구 중력장을 추정하는 사업이다. 위성 발사 후 이전 보다 수 십배 정확한 지구중력장 모델을 생성하였으며, 지구중력장 변화도 30일마다 추정하고 있다. GRACE 위성의 핵심 관측기인 위성간 거리 측정기의 원리에 대해 소개하고, 운용 결과 및 성능에 대해 소개 하였다. 발사 전 성능 분석 단계에서 고려되지 못했던 거리측정기 오차 요인에 대해 분석하고, 향후 연구 방향을 제시 하였다.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.126-134
• /
• 1997

In this study, We made visual inspection system using Vision Board. It is consist of an illuminator (a fluorescent lamp), image input device (CCD (Charge-Coupled Device) camera), image processing system(Vision Board(FARAMVB-02)), image output device (video monitor, printer), and a measuring instrument(TELMN1000). Length measurement by visual inspection system make use of 100mm guage block(instead of calculating distance between a camera and a object). It measured horizontal and vertical length factor from 400mm to 650mm by increasing 50mm. In this place, measured horizontal and vertical length factor made use of length measure- ment of a injection. A measuring instrument used to ompare a measured length of a injection visual inspection system with it. In conclusion, length measurement of a injection compared a measuring instrument with visual inspecion system using length factor of 100mm gauge block. We find that maximum error of length is 0.55mm when it compar with the measuring value of two devices(FARAMVB-02, TELMN1000). Program of visual inspection system is made up Borland C++3.1.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.588-590
• /
• 2006

Recently, many on-line approaches to instrument channel surveillance (drift monitoring and fault detection) have been reported worldwide. On-line monitoring (OLM) method evaluates instrument channel performance by assessing its consistency with other plant indications through parametric or non-parametric models. The heart of an OLM system is the model giving an estimate of the true process parameter value against individual measurements. This model gives process parameter estimate calculated as a function of other plant measurements which can be used to identify small sensor drifts that would require the sensor to be manually calibrated or replaced. This paper describes an improvement of auto-associative kernel regression by introducing a correlation coefficient weighting on kernel distances. The prediction performance of the developed method is compared with conventional auto-associative kernel regression.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.273-276
• /
• 1997

Seeing is an intelligent act. Retina is the most important part among the components of eye which is comprised of iris, pupil, lens, optic disk, and so forth. Because retina acts like a photo receiver to detect light from every object, if damaged, animals have a severe problem to live along with themselves and sometimes they lose their sight. In the ophthalmology, doctors use special instrument to see exact retina image of object and operate the surgery by rotating focus control knob. In this study, a basic test is done to achieve the auto focus control instrument. Specially made sledge and attenuator are installed on the optic bed to change the distance and laser power between the first reflective mirror and the second one. Control panel which is compiled by Visual C t t to control stepping motors ,laser power and photodiode are implemented with ADA-board.