• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.585-593
• /
• 2006

The effect of the shape of the side wall on vaporization and fuel mixture were investigated for the impinging spray of a direct injection(DI) gasoline engine under a variety of conditions using the LIEF technique. The characteristics of the impinging spray were investigated under various configurations of piston cavities. To simulate the effect of piston cavity configurations and injection timing in an actual DI gasoline engine, the parameters were horizontal distance from the spray axis to side wall and vertical distance from nozzle tip to impingement plate. Prior to investigating the side wall effect, experiments on free and impinging sprays for flat plates were conducted and these results were compared with those of the side wall impinging spray. For each condition, the impingement plate was located at three different vertical distances(Z=46.7, 58.4, and 70 mm) below the injector tip and the rectangular side wall was installed at three different radial distances(R=15, 20, and 25 mm) from the spray axis. Radial propagation velocity from spray axis along impinging plate became higher with increasing ambient temperature. When the ambient pressure was increased, propagation speed reduced. High ambient pressures tended to prevent the impinging spray from the propagating radially and kept the fuel concentration higher near the spray axis. Regardless of ambient pressure and temperature fully developed vortices were generated near the side wall with nearly identical distributions, however there were discrepancies in the early development process. A relationship between the impingement distance(Z) and the distance from the side wall to the spray axis(R) was demonstrated in this study when R=20 and 25 mm and Z=46.7 and 58.4 mm. Fuel recirculation was achieved by adequate side wall distance. Fuel mixture stratification, an adequate piston cavity with a shorter impingement distance from the injector tip to the piston head should be required in the central direct injection system.

• Journal of Information Technology Applications and Management
• /
• v.21 no.2
• /
• pp.149-165
• /
• 2014

This paper has studied whether cultural factors have an effect on privacy concern of Internet users in Korea and China. The result has shown that power distance, individualism, uncertainty avoidance, and long-term orientation are positively related to privacy concern, while masculinity is negatively related to privacy concern. This study has also found some similarities and differences between the two countries. First, privacy concern of Korean Internet users is significantly higher than that of Chinese users. Second, individualism and uncertainty avoidance significantly affect privacy concern in both Korea and China, although individualism in Korea has stronger effect than that in China. Third, long term orientation has a significant effect in only Korea while power distance is significant only in China. These results suggest that an online company doing businesses in multiple countries should have country-specific privacy policies to deal with the privacy concern of Internet users in different countries.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_1
• /
• pp.297-306
• /
• 2024

This study identified the power distance tendency of firefighters. Power distance propensity is one of the important organizational and cultural factors that influence the development of the organization. There is a big difference in the attitude of the members of the organization to perform their work according to the tendency of the distance of power. As a result of the main study, the overall level of power distance propensity of the subjects was 2.55 points on average. In particular, there was a significant difference in the propensity of power distance according to class (p<0.05). In the future, it is necessary to study the effect of job characteristics according to the rank of firefighters on the propensity to distance power. It is expected to form a positive organizational culture of the firefighting organization by utilizing the power distance tendency of the members of the organization.

• Geomechanics and Engineering
• /
• v.17 no.5
• /
• pp.413-420
• /
• 2019

The changes in earth pressure and ground settlement due to underground excavation near an existing retaining wall were studied experimentally according to the separation distance between the underground excavation and the retaining wall. In addition, this study attempted to experimentally prove that the arching phenomenon occurred during the construction of the underground space. A model tank having 120 cm in length, 160 cm in height, and 40 cm in width was manufactured to simulate underground excavation through the use of five separated base wall bodies. The variation of earth pressure on the retaining wall was measured according to the underground excavation phase through the use of 10 separated right wall bodies. The results showed that the earth pressure on the retaining wall was changed by the lowering of the first base bottom wall; however, the earth pressure was not changed significantly by the lowering of the third base bottom wall, since the third base wall had sufficient separation distance from the retaining wall. Lowering of the first base wall induced a decrease in the earth pressure in the lower part of the retaining wall; in contrast, lowering of the first base wall induced an increase in the earth pressure in the middle part of the retaining wall, proving the arching effect experimentally. It is necessary to consider the changes in earth pressure on the retaining wall in designing earth retaining structures for sections where the arching effect occurs.

• Corrosion Science and Technology
• /
• v.21 no.5
• /
• pp.327-339
• /
• 2022

The water-jet technique started by Bridgman can cut metal and alloys without harmful gas and fume. However, while this technique is convenient to cut metals and alloys, in the case of coated pipe, water jet induces the degradation of coatings on the pipes, and may facilitate structural failure, leakage, and loss of products. While there are many reports on the effect of water jet on cut metals and the damage of metallic materials, research on the effect of water impingement on the epoxy coatings has been little studied. In this work, we therefore control the velocity of water jet, distance between nozzle and specimen, and water temperature, and discuss the effect of water impingement on the epoxy coatings. Increasing water velocity and water temperature and reducing nozzle distance increased the degradation rates of three epoxy coatings were increased. Among three test parameters - water velocity, nozzle distance and water temperature, water temperature was relatively effective to increase the degradation rate of epoxy coatings.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.19-28
• /
• 1999

This survey is to investigate the effect of plants and waterscape facilities on the thermal indoor environment and to provide basic data for proper plant cultivation to enhance indoor landscape. The survey of the measure of comfort on the indoor environment for the residents of Taegu shows that the measure of comfort on the thermal-environment, which consist of temperature and humidity, has more negative responses than the measure on lighting . are . sound environment, which consists of air freshness, lighting condition and sound environment. The experiments on the effect of the amount of leaves and the distance of plants on the indoor thermal-environment are made. The experimental results illustrate that, as the capacity of a plant becomes greater and the distance from the plant shorter, the falling effect of temperature and the rising effect of humidity on the top of the plant are taken higher than on the side of the plant. When the same amount of leaves is set up, the distance range of the rising effect of humidity becomes wider than that of the falling effect of temperature. The investigation of the effect of waterscape facilities on the indoor thermal-environment shows that temperature and humidity of the space with installed waterscape facilities are lower and higher than without facilities, respectively.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.25-31
• /
• 2020

Boiling Liquid Expanding Vapor Explosion(BLEVE) can cause not only economic damage to the plant but also serious casualties. LPG accidents account for 89.6 percent of all accidents caused by gas leaks in Korea over the past nine years, while casualties from accidents also account for 73 percent of all accidents, according to statistics from the Korea Gas Safety Corporation. In addition, a potential explosion and a fire accident from one LPG storage tank may affect the nearby storage tanks, causing secondary and tertiary damage (domino effect). The safety distance standards for LPG used by LPG workplaces, charging stations, and homes in Korea have become stricter following the explosion of LPG charging stations in Bucheon. The safety distance regulation is divided into regulations based on the distance damage and the risk including frequency. This study suggests two approaches to optimizing the safety distance based on the just consequence and risk including frequencies. Using the Phast 7.2 Risk Assessment software by DNV GL, the explosion overpressure and heat radiation were derived according to the distance caused by BLEVE in the worst-case scenario, and accident and damage probability were derived by considering the probit function and domino effect. In addition, the safety distance between LPG tanks or LPG charging stations was derived to minimize damage effects by utilizing these measures.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.2
• /
• pp.132-141
• /
• 2022

The purpose of this study is to investigate the effect of science classes using elementary school distance science classes on science academic achievement and creative personality. The research group and non-research group were selected for 6th grade elementary school students. After 10 weeks of experimental treatment, science classes were conducted with the contents of the elementary school science section, 'Changes of the seasons'. In the three domains of 'knowledge', 'inquiry', and 'attitude', which are sub-domains of science academic achievement, as a result of the pre-post test, there was a positive effect in 'inquiry' and 'attitude', which are sub-domains of science academic achievement. However, it was found that there was no positive effect in 'knowledge', a sub-domain of academic achievement. However, it was found that there was a positive effect in the overall test result of academic achievement. Therefore, it is interpreted that science classes using elementary school distance science classes had an effect on academic achievement. There was a significant effect in the sub-domains of the creative personality test, 'persistence/obsession', 'self-confidence', 'humor', 'imagination', 'openness', 'adventure', and 'independence'. However, it was found that there was no effect in the sub-domain 'curiosity'. The overall test results of the creative personality test showed a significant effect. Therefore, it is interpreted that science classes using elementary school distance science classes are effective in cultivating creative personality. Students' perceptions of science classes using elementary school distance science classes also showed positive responses.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.221-227
• /
• 2017

To apply a square-shaped beam homogenizer to laser shock peening, it should be designed with a long working distance and by considering metal targets with various shapes and textures. For long working distances, a square-shaped beam homogenizer with a long depth of focus is required. In the range of working distance, the laser beam is required to have not only high efficiency but high uniformity, in other words, a good peening quality is guaranteed. In this study, we defined this range as the working distance for laser shock peening. We have simulated the effect of some parameters on the working distance. The parameters include the focal length of the condenser lens, pitch size of the array lens, and plasma threshold of the metal. The simulation was performed through numerical analysis by considering the diffraction effect.

• Research in Community and Public Health Nursing
• /
• v.33 no.3
• /
• pp.312-320
• /
• 2022

Purpose: This study was performed to explore the effect of the delivery format on teaching presence, learning presence, and learning outcomes in distance learning of nursing students. Methods: A descriptive survey was conducted to understand teaching presence, learning presence, and learning outcomes depending on the delivery format of distance learning. Quota sampling methodology was used to recruit 295 nursing students from all over the country, and data collection was done from July 27 to September 10, 2020. The first delivery format for distance learning was synchronous learning in which communication between the instructor and students occurred simultaneously. The second delivery format was asynchronous learning in which prerecorded videos were provided and communication did not occur simultaneously. Results: In synchronous learning, teaching presence (especially direct facilitation) and learning presence (especially emotional expression) had a statistical significance that was higher than in asynchronous learning. However, in learning outcomes, there was no statistically significant difference. There were significant positive correlations between teaching presence, learning presence, and learning outcomes, and there were significant positive correlations. Conclusion: It can be suggested that learning outcomes can be improved if presence is improved in the distance learning environment based on the results of this study. It is necessary to add contact with nursing students and instructors to improve teaching presence in the asynchronous learning, and it is necessary to help students express their emotions to improve learning presence.