• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.709-719
• /
• 1994

The aim of this investigation was to identify which suing is more suitable for uprighting of the 30 degree inclined lower second molar in different situations. Between four different molar uprighting springs which were A, B, C type and T-loop spring, the author tested T-loop suing as a control material and the other springs were experimental group. Each spring was fabricated from .017' $\times$ .025' TMA wire and preactivated with 40 degree tip-back bend. Stabilizing unit included from the lower right central incisor to the lower right second premolar which were made by acrylic resin. The photoelastic overview of the lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature than the mesial of the lower second molar when A type uprighting spring was applied, which can be used as a space regainer. 2. Higher level compression was presented at the mesial root apex area than the distal of the lower second molar in B type uprighting spring, which can be used as a space closer. 3. Areas of higher compression and tension were observed about the mesial and distal root of the lower second moalr than A and B type in C type uprighting spring, which can be used as a partial space regainer.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.16.1-16.9
• /
• 2018

Objectives: Understanding the reason for an unsuccessful non-surgical endodontic treatment outcome, as well as the complex anatomy of the root canal system, is very important. This study examined the cross-sectional root canal structure of mandibular first molars confirmed to have failed non-surgical root canal treatment using digital images obtained during intentional replantation surgery, as well as the causative factors of the failed conventional endodontic treatments. Materials and Methods: This study evaluated 115 mandibular first molars. Digital photographic images of the resected surface were taken at the apical 3 mm level and examined. The discolored dentin area around the root canal was investigated by measuring the total surface area, the treated areas as determined by the endodontic filling material, and the discolored dentin area. Results: Forty 2-rooted teeth showed discolored root dentin in both the mesial and distal roots. Compared to the original filled area, significant expansion of root dentin discoloration was observed. Moreover, the mesial roots were significantly more discolored than the distal roots. Of the 115 molars, 92 had 2 roots. Among the mesial roots of the 2-rooted teeth, 95.7% of the roots had 2 canals and 79.4% had partial/complete isthmuses and/or accessory canals. Conclusions: Dentin discoloration that was not visible on periapical radiographs and cone-beam computed tomography was frequently found in mandibular first molars that failed endodontic treatment. The complex anatomy of the mesial roots of the mandibular first molars is another reason for the failure of conventional endodontic treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.203-224
• /
• 1992

The purpose of this study was to evaluate the stress distribution developed in supporting structures by distal extension removable partial denture with 4-types of direct retainer. The direct retainers examined were Akers clasp, RPI clasp, RPA clasp and RPL clasp in bilateral & unilateral free end case. 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate the compressive stress at measuring points. The results were as follows. 1. In bilateral free end case, RPI clasp exhibited the similar stress distribution on distal and mesial alveolar crest but Akers clasp exhibited higher stress concentration on distal alveolar crest than mesial alveolar crest. 2. In bilateral free end case, RPA clasp and RPL clasp exhibited the similar stress distribution on distal and mesial alveolar crest and RPL clasp exhibited higher stress concentration on buccal alveolar crest than lingual alveolar crest. 3. Akers clasp produced high stress concentration on residual alveolar ridge distally, but RPI clasp, RPA clasp and RPL clasp produced even stress distribution on residual alveolar ridge. 4. Removable partial denture in unilateral free end case exerted higher stress on abutment tooth root apex than bilateral distal extension removable partial denture.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.139-145
• /
• 1982

Eighty four human maxillary second premolars were injected with china. ink, decalcified, cleared and used in study, in vitro, to determine the number of root canals, the frequency and location of lateral canals, the frequency and location of transverse ansatomoses, the curvature of root canals, the location of apical foramens, and the frequency of apical deltas. The results were as follows: 1. Most of the teeth demonstrated one canals, but the only tooth was found to have two canal. 2. Of the 101 canals studied, 85.1% of the canals were found to have lateral canals and these ramifications were usually located in the apical third of the root. 3. Of the two root canals in one root, 25.4% of the canals were found to have transverse anastomoses and were usually located in the middle third of the root 4. 33.3% of apical foramens were located directly on the root apex and 66.7% of them laterally, and 46.5% of canals showed distal curvature.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.139-144
• /
• 1981

Eighty four human maxillary first premolars were injected with china ink, decalcified, cleared and used in study, in vitro, to determine the number of root canals, the frequency and location of lateral canals, the frequency and location of transverse anastomoses, the curvature of root canals, the location of apical foramens, and the frequency of apical deltas. The results were as follows: 1. Most of the teeth demonstrated two canals, but 20.2% of the teeth were found to have one canal. 2. Of the 151 canals studied, 38.4% of the canals were found to have lateral canals and these ramifications were usually located in the apical third of the root. 3. Of the two root canals in one root, 35.7% of the canals were found to have transverse anastomoses and were usually located in the middle third of the root. 4. 15.2% of apical foramens were located directly on the root apex and 84.8% of them laterally, and 52.3% of canals showed distal curvature.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.99-102
• /
• 1989

Thirty mandibular first molars were fixed, decalcified, washed and embedded in paraffin to observe the root canal size and morphology at apical 5mm area. The results were as follows 1. The 55% of mesial canals were single-canaled at apical 5mm area, but 95% of distal canals were single-canaled. 2. The morphology of canal at apical 5mm area were varied, most of them were round or ovoid and 8-shaped. 8-shapes of them were long, slender or long, thick. 3. The size of mesial canal was $1.8{\pm}0.2$, $0.6{\pm}0.1mm$, but that of distal canal was $1.0{\pm}0.2$, $0.6{\pm}0.1mm$ each.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.675-694
• /
• 2000

The purpose of this study was to investigate the displacement of and the stress distribution on the prosthesis, abutment, and its supporting tissues under functional load, and the effect of alteration in root length of 2nd abutment. The 3-dimensional finite element method was used and the finite element models were prepared in which the abutments of left mandibular 5 unit axed partial denture were canine, the 1st pre-molar and the 2nd molar, and the root lengths of canines were as follows. Model I : Root length of canine was 2mm longer than the 1st premolar Model II : Root length of canine was 2mm shorter than the 1st premolar Static compressive force of 300N was applied to connector between 2nd premolar & 1st molar, and then von Mises stress, displacement and reaction force were obtained. The results were as follows : 1. In fixed partial denture, prosthesis under load on pontic was rotated around mesio-distal long axis of it from longual side to buccal, and simultaneously bended in buccal and gingival direction with mesial end deformed in gingival direction and distolingual end in occlusal. 2. Clinical crowns of abutments were bended in the same directions with those in which prosthesis deforms. Due to that, roots of anterior abutments were twisted in counterclockwise with concentration of shear stress on distal or distobuccal sides of their cervices, and that of posterior was in clockwise with concentration of shear stress on mesiobuccal side of it in the same level with anterior abutments. 3. In case that root length of the 2nd abutment was longer than that of the 1st abutment, its displacement and reaction force which means the force tooth exerts on the surrounding periodontal tissues were smaller but shear stress on itself was larger than in the case root length of 2nd abutment was shorter.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.1
• /
• pp.25-35
• /
• 2020

The purpose of this study is to evaluate the morphological characteristics of the roots and roots canals of primary molar teeth using Cone-Beam Computed Tomography (CBCT). A total of 68 CBCT images of children aged 4 - 5 years was used for this study. A total of 160 molar teeth were analyzed. Various parameters such as the number of roots and canals, length of root and root canal, and the angulation and shape of the roots were analyzed. All maxillary primary molars had 3 roots. The presence of 2 root canals in 1 root was only observed in the mesiobuccal root of maxillary primary second molars. Most mandibular primary molars had 2 roots, and most mesial roots had 2 root canals. Concerning the length of the roots, the palatal root of the maxillary primary molar was found to be longest whereas the distobuccal root was shortest. In mandibular primary molars, the mesial root was longer than the distal root. In maxillary primary molars, the palatal root had the greatest angulation whereas the distal root has the greatest in mandibular molars. The root and root canals of maxillary primary molars were more curved in shape whereas mandibular primary molars were straight.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.115-121
• /
• 1990

Forty extracted human mandibular second molars with C-shaped canal were chosen to study the anatomy of the root canal. The experimental teeth were injected with china ink, decalcified and cleared with Winter green oil, in vitro, to study the number of root, root canal, canal per root, frequency and location of lateral canal and transverse anastomosis. 1. All teedth had one root. 2. Mesial roots with two canals were 25%, and mesial roots with one canal were 75%. All distal roots had one canal. 3. In the roots with two canals, the common apical foramen appeared in 20% and the separte apical foramen appeared in 80%. 4. The frequence of lateral canal was 33.3% and the most frequent region was middle 1/3. 5. All teeth had the transverse anastomosis in all region of the roots.