• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.233-248
• /
• 1991

The purpose of this study was to qunatatively analyze the stress patterns induced in the abutment, superstructure, supporting bone and to determine the deflection of abutment and superstructure by appling occlusal force to natural teeth supported fixed prostheses and implant-supported fixed prostheses. The analysis has been conducted by using the two dimensional finite element method. The implant and natural tooth-supported bridge has a first molar pontic supported by mandibular second bicuspid and implant posterior retainer, which were rigidly(Model A) or flexible(Model B). The natural teeth-supported bridge has a first molar pontic supported by mandibular second bicuspid and second molar, which were rigidly splinted together(Model C). 63.5kg(Load P1) of localized load on central fossa of first molar pontic and 24kg(Load P2) of distributed load on each occlusal surface were applied respectively. 1. The coronal portion of premolar pontic and posterior abutment in fixed partial denture deflected inferiorly in order of Model B, Model C and Model A under Load P1 and Load P2. 2. Mesial displacement of the coronal portion of premolar showed in Model A, Model B and Model C under Load P1, but mesial displacement of that in Model B and distal displacement of that in Model A and Model C showed under Load P2. 3. Mesial displacement of the coronal portion of the pontic and distal displacement of the coronal portion of posterior abutment showed in Model A, Model B and Model C under Load P1 and Load P2. Displacement in the case of Model B was greater than that of Model A and Model C. 4. In the case Model A under Load P1 and Load P2, high stress apically was concentrated in the mesiocervical portion of the posterior abutment than in the disto-cervical portion of the premolar. 5. In the case of Model B under Load P1 and Load P2 high stress was concentrated in the case of the premolar than in that of posterior abutment and high stress especially was concentrated in the connected portion of pontic and posterior abutment. 6. In the case of Model C under Load P1 and Load P2, high stress was concentrated in the distal area of the cornal portion of premolar and the mesial area of the coronal portion of posterior abutment, and stress pattern was anteroposterially symmetric around the pontic. 7. Load P1 and Load P2 compared, stress magnitude was different but stress pattern was similar in Model A, Model B and Model C. 8. Under Load P1 and P2, stress magnitude in the mesial distal portion and the portion of root apex of the posterior abutment was in order of Model B, Model A and Model C.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.290-300
• /
• 2016

Objective: This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods: Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results: An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions: The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

• Journal of Forest and Environmental Science
• /
• 제18권1호
• /
• pp.1-6
• /
• 2001

본 연구는 음나무의 증식을 위해 근삽을 이용하여 대량번식방법의 체계를 확립하고자 실시하였다. 조사된 결과는 다음과 같다. 1. 음나무의 근삽시 생장조절물질의 처리는 고농도보다 저농도가 효과적인 것으로 나타났으며, 생장조절물질 처리에 따른 부정아 발생율은 IBA, NAA 300mg/L 처리구에서 96.6%로 가장 높게 나타났으나 무처리 역시 90.0%로 높은 부정아 발생율을 나타내었다. 또한 엽의 특성(엽수, 엽신, 엽폭)은 무처리와 생장조절물질 처리간에 큰 차이를 나타내지 않았다. 2. 근의 방향에 따른 근삽은 가로근삽(100%)과 세로근삽 (92.5%) 이 모두 90% 이상의 부정아 발생율을 보여 두 처리 모두 높은 부정아 발생율을 나타내었고, 부정아 발생수 및 엽 특성(엽수, 엽병, 엽신 및 엽폭)에 있어서 세로근삽이 가로근삽보다 모두 높게 나타났다. 3. 바로묻기 한 것이 거꾸로묻기 한 것보다 부정아 발생율, 부정아 발생수 및 엽특성(엽수, 엽신, 엽폭)에서 높은 값을 나타냈으며, 거꾸로묻기 한 경우 세근의 발달이 없거나 미약하며, 부정아 발생의 경우 기극 부근에서 발생하여 지면으로 올라오는 경우를 나타냈다.

• 대한치과의사협회지
• /
• 제25권12호통권223호
• /
• pp.1145-1156
• /
• 1987

The purpose of this experimental study was to analyze the stress distribution from fixed partial dentures to the surrounding structures. This study was carried out on the experimental bridges with K-L blade, F.D.B.I.-11 type, F.D.B.I.-21 type, shape-memory metal blade and two-Apacerams as posterior abutment. The stress patterns and fringes were observed through the circular transmission polariscope. The results of this study were obtained as follows: 1. The stress was more concentrated to the roots apex than the implants. 2. In all blade implants, the stress was more concentrated to the distal side than the mesial side. 3. F.D.B.I.-11 type was more stress concentrated than the 21 type. 4. Shape-memory metal blade was the most effective for stress distribution. 5. Apacerams were more stress concentrated than the blde types and in the model of Apaceram with rubber-ring, anterior root was tipped distally.

• 대한치과의사협회지
• /
• 제50권6호
• /
• pp.322-328
• /
• 2012

Ectopic eruption of the permanent first molar is defined as the eruption of the tooth in an abnormal position or orientation. It may causes distal root resorption and premature exfoliation of the adjacent primary second molar and uncontrolled space loss is followed. Prolonged partial impaction of the permanent molar may also cause undetected caries or abscess formation of the neighbor teeth. The purpose of this paper is to provide a brief review regarding the etiology, classification, and different management techniques for correcting ectopic eruption of permanent first molar.

• 치과방사선
• /
• 제2권1호
• /
• pp.41-46
• /
• 1972

The author had measured the alveolar bone level of periodontal disease on 50 cases of orthopantomogram to detect the degree of alveolar bone resorption of both sexes of Korean. The results were obtained as follows; 1. Alveolar bone resorption of mesial and distal portion was similiar in same patient. 2. The order of alveolar bone resorption was mandibular anterior region, posterior region, canine and premolar region of both jaws. 3. The degree of alveolar bone destruction was severe in shorter root length than longer. 4. The degree of alveolar bone resorption was severe in forth decades.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.41-46
• /
• 1976

The purpose of the current study was to investigate histologic changes in the alveolar bone of the lower molar region subsequent to the loss of their opposite molars, and to characterize chemical alterations by utilization of histochemical procedures. Twenty five rats(Sprague Dawley), approximately 150-200gm body weight, were used in this experiment. In the treated animals, upper molars were removed. The animals were decapitated by groups at the following intervals after teeth removals: 10th, 20th, 50th, 70th and 100th day. The normal, untreated rats were used as controls. The molar region of lower jaw, including the intact alvelar bone and teeth was dissected and specimens were decalcified in 3% formic acid. After the tissues were fully decalcified, the specimens were embedded in celloidin and sectioned in mesiodistal plane. These sections were stained in the following staining methods. Mallory azan stain and hematoxylin-eosin stain were utilized for structural evaluation. Polysaccharides were demonstrated by means of the PAS reaction. Acidmucopolysaccharides were studied by means of the colloidal iron stain. Alloxan-Schiff reaction was used for protein. The results were as follows: 1) In the control animals, bone resorption was noted in the distal alveolar bone proper and bone apposition was shown in the mesial alveolar bone proper. But in the treated animals, bone apposition was observed on the mesial and distal walls of the alveolus and osteoclastic activity was not noted in any walls. 2) Bone apposition was most prominent from the 10th to 20th day after treatment. 3) Appositional growth of cementum along the surface of root was prominent from the 50th to 70th day after treatment. 4) In the area where osteoblastic activity was apparent, osteoblasts were stained strongly in the PAS and alloxan-Schiff reaction. A plastic resorption line showed strong alloxan-Schiff reaction. 5) In the colloidal iron stain, the alveolar wall adjacent to the cementum apposition area was stained more strongly than the other areas.

• 동의생리병리학회지
• /
• 제22권4호
• /
• pp.896-902
• /
• 2008

Yukmijihwang-tang(YM) is used in Oriental medicine for treatments of diverse systemic symptoms including neurological dosorders. The present study was performed to examine potential effects of YM on growth-promoting activity of injured sciatic nerve axons. YM treatment in the injured sciatic nerve induced enhanced distal elongation of injured axons when measured 3 and 7 days after injury. Retrograde tracing of sciatic nerve axons showed YM-mediated increases in the number of DiI-labeled dorsal root ganglion (DRG) sensory neurons and spinal cord motor neurons at 3 days after injury. Hoechst nuclear staining showed that non-neuronal cell population was largely elevated by YM treatment in distal nerve area undergoing axonal regeneration. Furthermore, phospho-Erk1/2 protein levels were upregulated by YM treatment in the injured nerve area. These data suggest that YM may play a role in facilitated axonal regeneration in injured peripheral nerves. Further investigations of individual herbal components would be useful to explore effective molecular components and develop therapeutic strategies.

• Journal of Korean Neurosurgical Society
• /
• 제60권6호
• /
• pp.738-748
• /
• 2017

Objective : We present our experience of microvascular decompression (MVD) for glossopharyngeal neuralgia (GPN) and evaluate the postoperative outcomes in accordance with four different operative techniques during MVD. Methods : In total, 30 patients with intractable primary typical GPN who underwent MVD without rhizotomy and were followed for more than 2 years were included in the analysis. Each MVD was performed using one of four different surgical techniques : interposition of Teflon pieces, transposition of offending vessels using Teflon pieces, transposition of offending vessels using a fibrin-glue-coated Teflon sling, and removal of offending veins. Results : The posterior inferior cerebellar artery was responsible for neurovascular compression in 27 of 30 (90%) patients, either by itself or in combination with other vessels. The location of compression on the glossopharyngeal nerve varied; the root entry zone (REZ) only (63.3%) was most common, followed by both the REZ and distal portion (26.7%) and the distal portion alone (10.0%). In terms of detailed surgical techniques during MVD, the offending vessels were transposed in 24 (80%) patients, either using additional insulation, offered by Teflon pieces (15 patients), or using a fibrin glue-coated Teflon sling (9 patients). Simple insertion of Teflon pieces and removal of a small vein were also performed in five and one patient, respectively. During the 2 years following MVD, 29 of 30 (96.7%) patients were asymptomatic or experienced only occasional pain that did not require medication. Temporary hemodynamic instability occurred in two patients during MVD, and seven patients experienced transient postoperative complications. Neither persistent morbidity nor mortality was reported. Conclusion : This study demonstrates that MVD without rhizotomy is a safe and effective treatment option for GPN.

• 대한치과교정학회지
• /
• 제45권1호
• /
• pp.20-28
• /
• 2015

Objective: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. Methods: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. Results: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. Conclusions: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable.