• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1178-1184
• /
• 2006

This study was carried out to investigate the effect of ethanol extract of antler velvet (EAV) on common serum chemistry panels and histopathological change in rats exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Administration of TCDD ($50{\mu}g/kg$ body weight) induced significant decrease in platelet count (p<0.01), creatine phosphokinase (CPK, p<0.01), lactatate dehydrogenase (LDH, p<0.05) and glucose (p<0.05) levels and increase in hemoglobin (p<0.05), aspartate aminotransferase (AST, p<0.01), alanine amino transferase (ALT, p<0.05) and lipase activities (p<0.05), and blood urea nitrogen (BUN, p<0.05), triglyceride (p<0.01) and low density lipoptotein cholesterol (LDL-C, p<0.05) levels. However, pretreatment of EAV at daily dose of 20 mg/kg b.w. from 1 wk before TCDD exposure for 5 wks attenuated the abnormality of the overall serum chemistry panels but statistical difference between TE and TA groups was observed only in testicular weight (p<0.01), LDH activity (p<0.05), glucose (p<0.05) and lipase activity (p<0.01). In addition, TCDD induced significant histopathological changes including swelling, fatty metamorphosis, and vacuolar degeneration in liver; edema in proximal and distal convoluted tubules, and glomerulus in kidney; severe atrophy of red purple and appearance of significant number of macrophage in spleen; prominent atrophy and decrease in immune cells in thymus. On the other hand, administration of EAV attenuated histopathological damage induced by TCDD. These results further suggest that administration of EAV attenuates TCDD induced testicular, liver, pancreatic, hematopoietic and nephrotic toxicities in rats.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.213-222
• /
• 2018

Metasediment-hosted Pb-Zn mineralized zone has been found in Dyusembay of Kazakhstan. Its petrological properties, metal index, alteration index and redox-sensitivity are compared with those of SEDEX type deposit. Mineralization is developed along foliation of host rock (graphitic phyllite) and controlled by folds and faults; major ore minerals including pyrite, pyrrhotite, sphalerite, and galena are disseminated or interlayered with fine-grained quartz. The margin of the mineralized zone is metamorphosed accompanying sericite and chlorite. Hydrothermal brecciation and Pb-Zn mineralization formed in quartz-calcite stockworks are confirmed at the around of Maytyubin granitoid intrusions. The mineralization is classified into three types according to those of occurrence, paragenesis, chemical composition and isotopic characteristics. Type 1 whose fine-grained pyrite, pyrrhotite and sphalerite are formed in parallel yet discontinuous to well-developed foliations of the host rock; its geochemistry is similar to those of the earlier stage in SEDEX-type mineralization. In case of type 2, the ore minerals of which are concentrated being parallel to a foliation by regional metamorphism, and most of them associated with quartz and muscovite (${\pm}$ biotite) paragenetically. Type 3 is formed in the hydrothermal breccia zone whose ore minerals are controlled by foliation and breccia and developed in quartz ${\pm}$ calcite veins having a form such as stratification, stockwork or veinlets. Host rocks in the mineralized zone indicate homogeneous metamorphic grade and there is no specific alteration zonation. Also, all types (type 1, type 2, and type 3) represent similar REEs patterns, it can be interpreted that these are originated from a same source. Sulphides occurred in mineralized zone indicate a limited range of sulphur isotope values (type 2, ${\delta}^{34}S=-13.3{\sim}-11.7$‰; type 3, ${\delta}^{34}S=-13.9{\sim}-8.2$‰), and a result of geothermometry presents different temperature ranges: type 2($251{\pm}38^{\circ}C{\sim}277{\pm}40^{\circ}C$); type 3($360{\pm}2^{\circ}C$ to $537{\pm}29^{\circ}C$). It is estimated to be due to the effect of metamorphism and Maytyubin granitoid intrusions, respectively. In addition, ternary chart of thorium, scandium, and zircon for discrimination of tectonic setting and redox sensitivity using V/Mo values indicate that hydrothermal sediments put on reduction environment after precipitation, before being affected by metamorphism and intrusion activity. Geochemical data are plotted on a distal trend of SEDEX-type with discrimination plot using SEDEX index. As a result, petrological-geochemical properties demonstrate that Dyusembay Pb-Zn mineralized zone is comparable to distal-type of SEDEX deposit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.307-314
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of immobilization of the recombinant human bone morphogenetic protein 2 (rhBMP-2) on anodized titaum implants coated with heparin to enhance the vertical alveolar ridge augmentation in the supraalveolar peri-implant defect region. Materials and methods: 18 pure titanium implants (7.0 mm in length, 3.5 mm in diameter) were manufactured for this study. All implants were anodized and designed insertion reference line marked with laser at the apical 2.5 mm from the fixture platform. Implantation of 6 noncoated anodized implants (Control group), 6 anodized implants physically adsorbed with rhBMP-2 by dip and dry method (BMP group) and 6 anodized implants chemically immobilized 3,4-dihydroxyphenylalanine (DOPA)-heparin/ rhBMP-2 (Hep-BMP group) was performed in the both mandibular of three male adult beagle dogs using split-mouth design. Radiologic examinations were performed immediately after implant placement and 4 and 8 weeks after implant placement. The amount of mesio-distal bone augmentation was evaluated by measuring the vertical distance from the platform to the marginal bone. Statistical analysis was performed using one-way analysis of variance (SPSS version 18.0) and multiple comparison analysis of The Kruskal-Wallis test and the Mann-Whitney U test. Statistical significance was established at the 5% significant level. Results: At the 4 weeks vertical alveolar ridge augmentation of Control group, BMP group and Hep-BMP group is $0.09{\pm}0.22mm$, $1.02{\pm}0.72mm$, and $1.29{\pm}0.51mm$, At the 8 weeks $0.11{\pm}1.26mm$, $1.11{\pm}0.58mm$, $1.59{\pm}0.79mm$ according to radiographic observations. The two experimental groups showed a significantly increasing in vertical bone height compared with the control group (P<.05). However, there is no significant difference between the BMP group and Hep-BMP group (P>.05). Conclusion: The rhBMP-2 coated implants were enhanced the vertical bone growth in the supraalveolar peri-implant defect area. However, there is no significant difference between chemically and physically coating method.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.335-347
• /
• 1997

Vitamin D is known to exert its action by activating DNA and RBA within target cells to produce proteins and enzymes that can be used in bone resorption process. Particularly, the active form of vitmain D, 1,25-dihydroxycholecalciferol $[1,25-(OH)_2D_3]$, is considered to be one of the most potent stimulators of osteoclatic acitivity in vitro. The purpose of this study was to evaluate the effect of 1,25-Dihydroxyvitamin $D_3$ on the avtivity of periodotal ligament cells and, the experimental tooth movement. Human periodontal ligament cells were collected from the first premolar tooth extracted for the orthodontic treatment, and were incubated in the environment of $37^{\circ}C$, 5% $CO_2$ and 95% humidity. Microtitration(MIT) assay was done at 10, 25, 50 and 100ng/ml of 1,25-Dihydroxyvitamin $D_3$. 21 Sprague-Daft rats were divided into a control gmup(3), and experimental groups(18) where 100g of force from helical spring was applied across the maxillary incisors 1,25-Dihydroxyvitamin $D_3$ was injected into periodontal ligament at the mesial or distal surface of maxillary incisors so that we can compare the control side and the experimental side. Expreimental groups were sac rifled at 12, 24, 36, 48, 72hours and 7 days after force application, respectively. And the obtained tissues were evaluated histologically. The observed results were as follows. 1. The activity of periodontal ligament cells in l0ng/ml or 25ng/ml of 1,25-Dihydroxyvitamin $D_3$ 1,25-Dihydroxyvitamin $D_3$ was not significantly different to the control at the cultivation of 1, 2 and 3 days. 2. The activity of periodontal ligament cells was significantly increased at 3 days in 50 ng/ml of 1,25-Dihydroxyvitamin $D_3$ and 2, 3 days in 100g/ml of 1,25-Dihydroxyvitamin $D_3$. 3. Up to 7 days after force application, there was no difference in osteoblastic activity, tearing of periodontal ligament and proliferation of capillary at tension side between 1,25-Dihydroxyvitamin $D_3$ injection side and the control side. 4. The osteoclastic activity and the resorption of alveolar bone was greater in 1,25-Dihydroxyvitamin $D_3$ injection side than the control side at 36 hours after force application.

• Korean Journal of Veterinary Research
• /
• v.41 no.3
• /
• pp.429-436
• /
• 2001

The present study was performed to investigate the effect of iohexol-ethanol mixture and barium-ethanol mixture on the induction of transcatheter renal artery embolization in healthy 18 dogs, which were divided into two groups of 9 dogs and the 9 dogs were divided into 3 subgroups of 3 dogs. The renal artery embolization was undertaken unilaterally with the dose of 1.5, 2.0, and 3.0 ml/kg iohexol-ehtanol mixture and with the dose of 0.2, 0.4, and 0.8 ml/kg barium-ethanol mixture. And serum chemistry on 0, 1,3, 7, and 14 days, intravenous pyelography on 7days, angiography on 14 days, and histopathology on 14 days were evaluated. Serum BUN and creatinine concentration of two groups with iohexol-ethanol mixture and barium-ethanol mixture administration were mildly increased a t 1 day after injection of embolic materials and then returned to baseline. No significant changes in BUN and creatinine levels occurred in any of dogs. In all dogs with the dose of 1.5 ml/kg iohexol-ethanol mixture, the renal arteries were not embolized. All dogs with the dose of 3.0 ml/kg died. In all dogs with the dose of 2.10 ml/kg, the treated arteries were completely occluded. In barium-ethanol mixture administered group, the renal artery in one dog with the dose of 0.2 ml/kg was not embolized. In all dogs with the dose of 0.8 ml/kg, the renal arteries were completely embolized, but loac overembolization occured in two dogs. All animals with the dose of 0.4 ml/kg had effective embolization and no evidence of radiopaque barium opacity in systemic arteries distal to the renal-artery was found. All embolized kidneys were shrunk and decreased in size in gross examination and were shown diffuse necrosis in histopathologic examination. In the present study, renal arteries were embolized with the dose of 2.0 ml/kg iohexol-ethanol mixture or 0.4 ml/kg barium-ethanol mixture. And it is considered that the dose had a satisfactory embolic effect.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.29-38
• /
• 2009

Statement of problem: A casting connection technique is widely used for repair, correction and addition to base metal framework. However, a casting connection technique may increase the risk of failure in clinical situations when high stresses exist. Purpose: The purpose of this study was to investigate the mechanical retentive groove design comparatively to increase the joint strength by using the three-dimensional finite element analysis model of a 3-unit fixed partial denture. Material and methods: Ten finite element models were constructed. (Model A: One retentive groove, Model B: Two retentive grooves, Model C: Three retentive grooves, Model D: Four retentive grooves, Model E: One horizontal groove and two vertical grooves, Model F: Two horizontal grooves and one vertical groove, Model G: One groove with the enlarged dimension, Model H: Two grooves with the enlarged dimension, Model I: One groove with the increased height, Model J: One groove with the increased width of base). The vertical force was applied to the mesial and the distal fossa to the casting connection of mandibular first molar. Results: The main factors, affecting joint strength of casting connection were both the retention between the primary cast and the secondary cast and the thickness of the primary cast remaining after preparing retentive groove. The increase of retentive force, according to the numbers and the dimension of retentive groove had an effect on distributing stress. However, in some cases, the increase of retentive force resulted in the increase of stress by reducing thickness of the primary cast in the connection area. Conclusion: The design of retentive groove that limits number of retentive groove for metal thickness and increases the depth of retentive groove for retention is highly recommended.

• Radiation Oncology Journal
• /
• v.25 no.3
• /
• pp.177-184
• /
• 2007

Purpose: To evaluate the palliative effect of endobronchial brachytherapy (EBB) for patients with lung cancer that previously received external beam radiotherapy (EBRT). Materials and Methods: From July 1992 to May 2003, 29 patients with a recurrent or persistent lung cancer were treated with palliative EBB at our institute. EBB consisted of three fractions (once a week) of a dose of 5 Gy using the high dose-rate remote afterloader. Symptomatic improvement was assessed subjectively, and patients were divided into two groups according to whether symptoms were improved or not. Factors such as age, performance status, duration from EBRT to EBB and the location of the tumor were compared between the improved and unimproved groups of patients. Results: Overall symptomatic improvement was found in 27 out of 52 symptoms (52%). Improvement as to the type of symptoms was seen in 41 %, 50%, 82% and 33% of patients with cough, dyspnea, hemoptysis, and obstructive pneumonia respectively. The rate of improvement of hemoptysis was more than that of cough (p<0.05). The median time to symptom relapse was 5 months. The improved patient group (n=17, 59%) had a better performance status and longer duration from EBRT to EBB than the unimproved patient group (p<0.05). Lesions located in the distal trachea and/or main bronchus were found more frequently in the improved group of patients than in the unimproved group of patients, but the difference was not statistically significant (p=0.06). Fatal complications developed in two patients (7%), which were a hemoptysis and bronchopleural fistula respectively. Conclusion: Symptom improvement was found in 60% of patients after EBB and improvement was maintained for 5 months. Palliative EBB, even when EBRT was given previously, can be effective for a patient that has an endobronchial symptom, such as hemoptysis, and for a patient with good performance and a long duration from previous EBRT to EBB.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.1-11
• /
• 2004

Predicting the arch length discrepancy by simply comparing the available arch perimeter with tooth materials is merely a 2-dimensional analysis of the teeth movement. However, the real teeth movement takes place 3-dimensionally and is affected by various factors such as, the arch fen the curve of Spee and the axis of the incisors. The purpose of this study is to clarify the relationship between the decrease in the arch perimeter and the horizontal positional change of the incisors after extraction of the 1st bicuspids, for more analytic evaluation of the arch length discrepancy at pre-treatment model analysis stage. In addition to that to evaluate the effect of the curve of Spee, teeth axis to the basal plane, and the incisional crowding to the treatment outcome. All patients were treated at the department of orthodontics, dental hospital, Yonsei university. Inclusion criteria for patients selection were as follows. $\cdot$ Angle classification I malocclusion with bialveolar protrusion $\cdot$ Extraction of 4 1st bicuspids $\cdot$ No tooth anomaly or prosthesis $\cdot$ No abnormal attrition $\cdot$ No ectopically erupted teeth $\cdot$ Angle classification I canine and molar relationship $\cdot$ Less than 3mm of crowding Model analysis of the above patients was performed and the following conclusions were obtained. 1. When the intercanine distance was maintained, the available space for the distal movement of the mandibular incisors after the extraction of the 4 1st bicuspids was larger than the space provided by the extraction of the 4 1st bicuspids. However the difference was less than 1mm. The more tapered the anterior arch form, the larger the difference. 2. Compared to the situation in which the intercanine distance was maintained, when the intercanine distance was expanded to meet the width of the Posterior teeth, the incisors could move about 3mm more distally. 3. The positional difference of the incisal tip was insignificant whether the central incisors were moved by tipping or bodily movement. 4. When the anterior crowding was solved without changing the intercanine distance, the larger the anterior arch length was, the more the anterior movement of the incisors. 5. When the curve of Spee was levelled, the increase in the arch perimeter was less than half of the deepest curve of Spee.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.127-142
• /
• 2000

This study have been carried out to find out the mechnical effect of Multiloop Edgewise Arch Wire(MEAW) making use of the finite element method. The tip back bend of MEAW taken in this analysis is $5^{\circ},\;10{\circ}\;and\;15{\circ}$. In addition, Class II or up & down elastic is applied to find out stress distribution and their values in PDL. A adult male of normal occlusion was selected to create the models of teeth and PDL. And the model of MEAW was also created using commercial finite element code (ANSYS version 5.2). The MEAW is forcibly engaged with a class II or up & down elastic, to determine the initial stress generated in PDL. Comparing the compressive and tensile stress at each reference-planes, following results are obtained. 1. When a MEAW of $5^{\circ},\;10{\circ}\;15{\circ}$ tip back bend was engaged with Class II or up & down elastic, the distribution of compressive, tensile stress in entire PDL is similar in each case. 2. The values of compressive and tensile stress in PDL is higher in $15{\circ}$ tip back bend case than in $10{\circ}\;or\;15{\circ}$ tip back bend case. 3. In the distal PDL of 1st and 2nd molar, compressive stress appears. The compressive area is more wide and its values is higher in PDL of 2nd molar than those in 1st molar. The compressive area and its values become more wide and higher according to the increase of the tip back bend. 4. The values of compressive stress are comparatively smaIIer in PDL of molars than those in premolars. 5. Comparing class II and up & down elastic case, tensile stress values in anterior teeth PDL are smaller md their distribution is more wide in up & down elastic case than class If elastic case. On another hand, there is no difference in distribution and stress values in PDL of posterior teeth between two cases. 6. Comparing the tensile area in PDL of anterior teeth, tensile stress values are maximum in PDL of canine.

• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.9-14
• /
• 2009

Insulin-like growth factor 2 (IGF2) is the first identified imprinted gene, which is paternally expressed in multiple mammalian species. A paternally expressed QTL for muscle growth and backfat thickness (BFT) has previously been identified near the IGF2 locus on the distal tip of pig chromosome 2 (SSC2p). Therefore the IGF2 gene is considered an economically important candidate gene for pig industry. Herein, this study explored genetic variation of IGF2 for in3-G3072A, in7-G162C and a new SNP in intron7 (C1589T) in Korean native pig (KNP) and commercial pig breeds, and detected their linkage disequilibrium within these breeds. Furthermore we investigated the effect of in3-G3072A on IGF2 gene expression in post-natal muscle and backfat tissues. The real-time quantitative PCR results showed that animals inherited allele G from a KNP sire had significant higher IGF2 gene expression in backfat tissue than those inherited allele A from a Yorkshire sire, however opposite situation in muscle. These results demonstrated the allele 3072G is associated with a higher IGF2 gene expression in fat tissues, but low gene expression in muscle tissues when compared with the 3072A allele. These results suggest that KNP with lower muscle mass and higher fat deposition might be associated with a higher frequency of the 3072G allele, and selecting KNP based on IGF2 genotypes could result in an economic benefit to KNP producers.