• 한국표면공학회지
• /
• 제50권4호
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.559-571
• /
• 2006

The overall objective of this research was to find out the interrelation of coagulant and organic matter during rapid mixing process and to identify the change of organic matter by mixing condition and to evaluate the effect of coagulation pH. During the coagulation, substantial changes in dissolved organics must be occurred by coagulation due to the simultaneous formation of microflocs and NOM precipitates. Increase in the organic removal efficiency should be mainly caused by the removal of microflocs formed during coagulant injection. That is, during the mixing period, substantial amount of dissolved organics were transformed into microflocs due to the simultaneous formation of microflocs and NOM precipitates. The results also showed that 40 to 80% of dissolved organic matter was converted into particulate material after rapid mixing process of coagulation. During the rapid mixing period, for purewater, formation of dissolved Al(III) (monomer and polymer) constant by rapid mixing condition, but for raw water, the species of Al hydrolysis showed different result. During the rapid mixing period, for high coagulant dose, Al-ferron reaction increases rapidly. At A/D(Adsorption and Destabilization) and sweep condition, both $Al(OH)_3(s)$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.128-136
• /
• 2004

The overall objective of this research was to find out the role of rapid mixing conditions in the species of hydrolyzed Al(III) formed by different Al(III) coagulants. When an Al(III) salt is added to water, monomers, polymers, or solid precipitates may form. Different Al(III) coagulants (alum and PACl) show to have different Al species distribution over a rapid mixing condition. During the rapid mixing period, for alum, formation of dissolved Al(III) (monomer and polymer) increases, but for PACl, precipitates of $Al(OH)_{3(s)}$. increases rapidly. Also, for alum, higher mixing speed favoured Al(III) polymers formation over precipitates of $Al(OH)_{3(s)}$ but for PACl, higher mixing speed formed more precipitates of $Al(OH)_{3(s)}$. At A/D and sweep condition, both $Al(OH)_{3(s)}$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1084-1089
• /
• 2010

This study elucidates the formation mechanism of SnO plate observed during the precipitation reaction of a $SnCl_2$ aqueous solution. $Sn_{21}Cl_{16}(OH)_{14}O_6$ and $Sn_6O_4(OH)_4$ precipitates was formed at pH=3~5 and at pH=11, respectively. When the pH was in the range of 11.5~12.5, the $Sn_6O_4(OH)_4$ precipitates dissolved into $HSnO_2{^-}[Sn_6O_4(OH)_4+4OH^-={6HSnO_2{^-}+2H^+]$ and dissolved $HSnO_2{^-}$ ions reprecipitated to SnO plate $[HSnO_2{^-}+H^+=SnO+H_2O]$. The $Sn_6O_4(OH)_4$ precipitates completely transformed into SnO plate through a repeated process of dissolution-precipitation in the range of pH=11.5~12.5.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.73-80
• /
• 2013

Fine suspended solids from coal mine drainage were treated in the treating plant, using two different pilot-scale inclined clarifiers: radial and lamella types. Suspended solids in the mine drainage were monitored along with other geochemical factors, and metal contents. Fe and Mn are the main chemical components in the drainage, which exist predominantly as total metal forms, whereas dissolved portion is negligible. The raw mine drainage is subject to physical and chemical treatment using $CaCO_3$ and NaOH, therefore the suspended solids are thought to be composed of Fe and Mn precipitates, possibly $Fe(OH)_3$, along with carbonate precipitates. The elemental composition of precipitates are confirmed by SEM-EDS analysis. As nearly all the dissolved ions were precipitated in the primary process by $CaCO_3$, no further aeration or prolonged oxygenation are of necessity in this plant. Adoption of inclined clarifier proved to be effective in treating fine suspended solids in the current plant. Successful application of the inclined clarifier will also be beneficial to improve the current treating process by excluding the current application of chemical agent in the first stage. The final effluents from the pilot plant meet the national standards and the low dissolved Fe and Mn contents are expected not to cause secondary precipitation after discharge.

• 대한환경공학회지
• /
• 제37권11호
• /
• pp.597-606
• /
• 2015

KOH가 용해된 메탄올 및 에탄올 용액의 탄산화를 통해 Potassium methyl carbonate (PMC) 및 Potassium ethyl carbonate (PEC) 침전물을 합성하여 $CO_2$를 고정화하고 침전물의 특성 연구를 수행하였다. PMC 및 PEC는 $CO_2$의 화학 흡수 반응에 의해 고체 침전물로 합성되고 이를 위해 소비된 $CO_2$양은 각 이론 값의 97.90% 및 99.58%이며 탄산화 중 상당량의 물리 흡수도 일어난다. 합성된 침전물은 PMC 및 PEC와 $KHCO_3$의 중량 비율이 약 5:5 및 8:2인 혼합물이며 침전물들은 물에 용해되어 알코올이 재생되고 최종 $KHCO_3$가 회수됨에 따라 본 공정은 효율적인 하나의 CCS 또는 CCU 기술로 활용될 가능성이 있다.

• Applied Microscopy
• /
• 제23권2호
• /
• pp.1-10
• /
• 1993

The effect of electrolyte on the extraction replicas of the precipiates in 3% Si steel was investigated. Three Kinds of electrolyte, 2% Nital solution (2% nitric acid+methanol; acid solution),, Sodium Citrate solution (5% sodiumcitrate+1% KBr+0.5KI+$H_{2}O$; aqueous neutral solution) and 10% AA solution (10% acetylacetone+ 1% tetramethylammoniumchloride+methanol; non-aqueous neutral solution), were compared. The preciptiates in 3% Si steel were dissolved in 2% Nital, but they were not dissolved in the Sodium Citrate and 10% AA solution. In Sodium Citrate solution, however, large second artifacts were introduced during sample preparation. Therefore 10% AA solution was found to be most useful for the preparation of extraction replica. The electrolysis condition of a matrix and precipitates were also checked by the measurement of potential-current curve in 10% AA solution. The matrix was electrolyzed at -400mV with respect to SCE(Saturated Calomel Electrode). In contrats precipitates were electrolyzed above 300mV. Precipitates were respected to be stable in 10% AA solution in the range of $-380mV{\sim}-300mV$ usually used to prepare extraction replicas.

• 한국광물학회지
• /
• 제18권2호
• /
• pp.117-125
• /
• 2005

산업체에서 사용하고 있는 칠러 냉각 장치에는 침전물이나 부유물이 많이 발생한다. 칠러 냉각장치에 마그네슘을 적용시켰을 때 나타나는 냉각수와 침전물 및 부유물의 변화를 연구하기 위하여 ICP-AES, IC, XRD, SEM 분석을 실시하였다. 칠러 냉각장치에 Mg를 적용할 경우 대부분의 용해 성분이 감소하는 경향을 보여주고 있어 냉각수의 수질이 상당히 개선되었다. 또한 유기물 형태로 존재하던 부유물이나 침전물이 거의 생성되지 않아 유기물 생성을 억제시키는 효과도 있는 것으로 판단된다.

• 열처리공학회지
• /
• 제21권3호
• /
• pp.150-156
• /
• 2008

The effects of austenitizing temperature in a range of $1000{\sim}1150^{\circ}C$ on the corrosion resistance in 420J2 stainless steel tempered at $150^{\circ}C$ were investigated by an electrochemical uniform corrosion test in a solution of 0.5M $H_2S0_4$. Pitting test and DL-EPR test for intergranular corrosion were carried out in a solution of 3.5% NaCl and 0.5M $H_2S0_4$ + 0.01 M KSCN respectively. In uniform corrosion test, specimens austenitized below $1100^{\circ}C$ showed similar corrosion current density and passive current density, whereas specimens austenitized at $1150^{\circ}C$ showed a little higher values. Pitting potential slightly increased with an increase of austenitizing temperature. The degree of sensitization, DOS, also slightly increased with an increase of austenitizing temperature, reaching the highest degree at $1150^{\circ}C$. It was expected that the increase of DOS was due to the larger grain size rather than the dissolved precipitates in the matrix.

• 한국광물학회지
• /
• 제16권1호
• /
• pp.107-123
• /
• 2003

본 연구는 0가 철 (ZVI)의 설치위치와 전극의 배열에 따른 다양한 조합의 전기적 투수성 반응벽을 대상으로 트리클로로에틸렌의 탈염소화 반응에 의한 정화시 ZVI의 부식에 기인하는 광물상침전물에 대해 알아보고, 이에 대한 조절 요소를 알아보고자 한다. 광물학적 연구 결과, 지하수 유입부의 ZVI 시료는 상대적으로 많은 레피도크로사이트, 훼리하이드라이트 혹은 철 수산화물과 (phospho)siderite가 산출되는 반면, 용출부의 ZVI 시료는 아카가나이트, 자철석/마그헤마이트, 그리고 중간 산물인 green rust (CR) I 과 CR II가 산출되었다. 이러한 광물 조합의 변화는 용존 산소 및 pH의 상승에 주로 기인한 것으로 나타났다. 또한 전기적 투수성 반응벽 내에 산출되는 광물상 침전물들의 조절 요소들은 (1) pH, (2) 용존산소, (3) 철의 부식시 중간 산물, (4) 음이온 종류 등으로 밝혀졌다.