Browse > Article

Effect of Austenitizing Temperatures on Corrosion Resistance of 420J2 Stainless Steel  

Kim, H.J. (Division of Materials Science & Engineering, Pukyong University)
Jung, B.H. (Division of Materials Science & Engineering, Pukyong University)
Publication Information
Journal of the Korean Society for Heat Treatment / v.21, no.3, 2008 , pp. 150-156 More about this Journal
Abstract
The effects of austenitizing temperature in a range of $1000{\sim}1150^{\circ}C$ on the corrosion resistance in 420J2 stainless steel tempered at $150^{\circ}C$ were investigated by an electrochemical uniform corrosion test in a solution of 0.5M $H_2S0_4$. Pitting test and DL-EPR test for intergranular corrosion were carried out in a solution of 3.5% NaCl and 0.5M $H_2S0_4$ + 0.01 M KSCN respectively. In uniform corrosion test, specimens austenitized below $1100^{\circ}C$ showed similar corrosion current density and passive current density, whereas specimens austenitized at $1150^{\circ}C$ showed a little higher values. Pitting potential slightly increased with an increase of austenitizing temperature. The degree of sensitization, DOS, also slightly increased with an increase of austenitizing temperature, reaching the highest degree at $1150^{\circ}C$. It was expected that the increase of DOS was due to the larger grain size rather than the dissolved precipitates in the matrix.
Keywords
Austenitizing temperature; 420J2 stainless steel; Uniform corrosion test; Pitting test; DL-EPR test for intergranular corrosion; Dissolved precipitates;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Masayoshi haswgawa et al. : Corrosion, 40 (1984) 371   DOI   ScienceOn
2 Y. H. Kim et al. : J. Corros Sci. Soc. of korea, 21 (1992) 111-119
3 李鶴烈 : 金屬腐蝕工學, 淵鏡文化社 (1995) 90-94
4 Y. S. Choi et al. : Materials letters, MLBLUE-07285 (2006) 1-4
5 K. M. Moon : J. Corros. Sci. Soc. of Korea, 18 (1989) 3-11
6 N. Alonso-Falleiros and M. Magri et al. : Corrosion, 55 (1999) 769-778   DOI
7 H. P Kim et al. : J. Corros Sci. Soc of Korea, 27 (1998) 53-64
8 J. J. Hauser et al. : Trans. of the ASM, 54 (1961) 514-525
9 中野平, 橫山忠正, 川谷洋司 : 鐵と鋼, 62 (1979) 1239
10 B. H. Jung et al. : J. of Korean Society for Heat Treatment, 17 (2004) 29-35
11 長谷川正義 : 스테인리스鋼 便覽, 世和 (1992) 36- 46
12 D. H. Mesa, A. Toro and A. Sinatora et al. : Wear, 255 (2003) 139-145   DOI   ScienceOn
13 J. H. G. Monypenny : Stainless Iron and Steel, 2 (1954) 33
14 日本鐵鋼協會編 : 鋼의 熱處理, 機電硏究社 (1979) 563-568
15 ASM International Handbook Committee : Stainless Steel, ASM International Materials Park (1996) 17- 18
16 Y. G. Kim et al. : J. of Korean Society for Heat Treatment, 5 (1992) 111-121
17 Y. S. Park : Master's thesis, Pukyong University (1995)
18 日本熱處理技術協會編 : 特殊鋼の熱處理, 日刊工業, No. 4, (1970) 225
19 Novak, P. et al. : Corrosion, 31 (1975) 344   DOI   ScienceOn