• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.715-722
• /
• 2014

Effects of coagulation types on flocculation were investigated by using a photometric dispersion analyzer (PDA) as an on-line monitoring technique in this study. Nakdong River water were used and alum and ferric chloride were used as coagulants. The aim of this study is to compare the coagulation characteristics of alum and ferric chloride by a photometric dispersion analyzer (PDA). Floc growing rates ($R_v$) in three different water temperatures ($4^{\circ}C$, $16^{\circ}C$ and $30^{\circ}C$) and coagulants doses (0.15 mM, 0.20 mM and 0.25 mM as Al, Fe) were measured. The floc growing rate ($R_v$) by alum was 1.8~2.8 times higher than that of ferric chloride during rapid mixing period, however, for 0.15 mM~0.25 mM coagulant doses the floc growing rate ($R_v$) by ferric chloride was 1.1~2.3 times higher than that of alum in the slow mixing period at $16^{\circ}C$ water temperature. Reasonable coagulant doses of alum and ferric chloride for turbidity removal were 0.1 mM (as Al) and 0.2 mM (as Fe), respectively, and the removal efficiency of those coagulant doses showed 94% for alum and 97% for ferric chloride. The appropriate coagulant dose of alum and ferric chloride for removing dissolved organic carbon (DOC) showed about 0.3 mM (as Al, Fe) and at this dosage, DOC removal efficiencies were 36% and 44%, and ferric chloride was superior to the alum for removal of the DOC in water.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.70-77
• /
• 2001

This paper present a fuzzy mxlel of describing reacton features for ozon contactor in advanced water treatn-ent systems. Input and output variables are chosen by considenng the object of ozon processing and several parameters related to management of water quahty. Dissolved organic carbon concentration, $UV_{254}$ absorptIon and $KM_NO_4$ consumption are proposed as common variables in input and outp.lt variables. Furthermore own concentration, raw water's temperature and contact time are suggested as input variables, Membership hmctions for input variables have triangular type share and the grades in each lrembership function are determined by investigating process data gathered at pilot planl The decision parts of fuzzy model have linear combination form of input variables and coefficients included in such linear equations are computedd with process clata in the sense of least square error Also fuzzy trodel suggested in this paper is partitioned by 3 independent fuzzy rnxlels using the characteristics of having no interactions armng output variables. As a result, such fuzzy mxlel has rrerits in computation and comprehension. According to simulatIon results, fuzzy moIel's outputs give almost similar data to process output under same input conditions.

• Journal of the Korean association of regional geographers
• /
• v.14 no.2
• /
• pp.114-125
• /
• 2008

Colored dissolved organic matter(CDOM) is an important component of ocean color that can be used as an invaluable tool in water quality and ocean color studies. With the largest source of coastal CDOM appearing to be from freshwater discharge into the ocean, coastal predictive models will do much to refine our knowledge about major processes that control CDOM distributions in coastal waters and provide a better insight into the global carbon cycle. This study aims at developing a GIS-based watershed-scale predictive model of CDOM distributions in Neponset river watersheds that can be used to appraise our understanding of CDOM sources and distributions in coastal waters and predict the response of CDOM concentration to changes in land use patterns. Weighting factors are developed for CDOM freshwater sources after extensive groundtruthing from various landuse types in the watershed. This model makes use of a publicly available DEM(Digital elevation model) as the base data for analysis. Stream networks, discharge, and land use data are used from public repositories while sub- watershed delineation, pour-points, and land use parcels are generated using Spatial Analysis of ArcGIS 9.2 to estimate the CDOM loading from various sources to the lower tributaries of rivers. The Neponset Watershed in eastern Massachusetts is selected as the site for development of the model.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.2
• /
• pp.19-26
• /
• 1991

This study has been constructed to establish the formation of the VC layer on various steels by immersion in fused borax bath containing Fe-V powder. The result obtained from the experiment are as follows. (1) The carbide is supposed to grow on the front surface of the carbide layers by the reaction between carbide-forming elements dissolved in the fused borax and carbon atoms successively supplied through the layer from the matrix. (2) The growth rate of the carbide layers was controlled by the diffusion rate of C in the carbide layer and C content in the matrix. (3) Carbide layer formed on the surface of the specimen is VC layer and the hardness of this layer is above $H_v$ 3000.

• Journal of Life Science
• /
• v.7 no.2
• /
• pp.107-111
• /
• 1997

To remove dissolved $NH_{4}$$^{+}$ in the aquaculture system, one ammonia oxidizing bacterium, Nitrsomonas sp. PK1, was isolated from samples collected in many aquacultural place and sludges of waste water. The stationary phase of this atrain was reached after 9 days, and the maximum $NO_{2}$ production was shown from 3 days to 9 days. In the selective medium, 0.1% of glucose was the good carbon source for growth. However, the $NO_{2}$productivity was repressed by the addition of glucose to the medium. When $Zn^{++}$ ion was supplemented to the medium, growth and the $NO_{2}$ productivity was increased, 10mM of $ZnCl_{2}$ was the optimal concentration for growth and 1 mM of $ZnCl_{2}$ was the optimal concentration for the production of $NO_{2}$, respectively.

• Journal of fish pathology
• /
• v.34 no.2
• /
• pp.255-259
• /
• 2021

This is the first report describing acute mass mortality occurred in juvenile olive flounder (Paralichthys olivaceus) caused by gas bubble disease (GBD). A total of 610 fish (average weight = 35 g), which were more than half of the fish acclimated at 17℃ in an aquarium, were killed within two days of acclimation. The dead and moribund fish showed excessively opened opercula and mouths, and occasionally, severe exophthalmia. Through microscopic observation, numerous gas emboli were found in the gills of the dead and live fish, while the fish were not infected with any microbial pathogens. The dissolved oxygen (DO) saturation level of the rearing water and seawater nearby the facility reached 145% and 286%, respectively, whereas other water quality parameters (such as salinity, pH, and chemical oxygen demand) were normal. The extreme saturation rate of seawater in the shore nearby seemed to be due to an enormous algal bloom that occurred there. Through molecular identification based on 18S rDNA sequences, the most dominant algal species was most closely related to Ulva californica (99.87% sequence identity) followed by U. prolifera, U. linza, and U. curvata (99.81%). Therefore, it can be concluded that supersaturated seawater due to mass algal bloom caused gas bubble disease in the olive flounder, leading to mass mortality. After technical adjustment, such as increased aeration, lowered water circulation rate, and inlet water filtration using micro-pore carbon filters, the DO level became normal, no further mortality occurred and the status of the fish was stabilized.

• Journal of Pharmacopuncture
• /
• v.22 no.1
• /
• pp.41-48
• /
• 2019

Objective: The aim of the study was to evaluate the hepatoprotective activity of the bark extract (Ethanol: Water) in the ratio of (3:1) of Rhizophora mucronata (BERM) by intoxicating the $HepG_2$ cell lines with different toxicants viz, $CCL_4$, Ethanol and Paracetamol with different concentrations of the extract were used. The $HepG_2$ cell lines were subjected to MTT Assay for studying the cytotoxicity. Methods: $HepG_2$ cells were plated using 96 well plate in 10% bovine serum, exposed to different toxicants viz, 2% $CCl_4$, 60% Ethanol and 14 mM Paracetamol respectively. The various test concentrations (18.85, 37.5, 75, 150 and $300{\mu}g/ml$) of bark extract of Rhizophora mucronata was added and incubated for 24 hours. Medium was removed after incubation period and 0.5 mg/ml MTT(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) was added and again incubated for 4 hours at 37oC. Then MTT was removed the crystals was dissolved in DMSO and absorbance was measured at 570 nm. Results: The result showed that dose dependent increase in percentage of viability at the doses of 18.85, 37.5, 75, 150, $300{\mu}g/ml$. Te results for the $CCl_4$ intoxicated, at $300{\mu}g/ml$ of the concentration of the extract, the % of viable cells was found out to be 99.6%, for Ethanol intoxicated, 97.67%, and Paracetamol induced, 75.37%, IC50 was $21.53{\mu}g/ml$, $12.61{\mu}g/ml$ and $21.42{\mu}g/ml$ respectively. Conclusion: Thus, we conclude that, the extract possesses defensive effect against different toxicants and can be used as an alternate drug for hepatotoxicity.

• Ocean and Polar Research
• /
• v.41 no.2
• /
• pp.47-61
• /
• 2019

The Dokdo coast is known for its high biodiversity. However, few studies have examined the biodiversity and macrobenthic community on the subtidal soft-bottom. Therefore, we collected macrobenthos (> 1 mm) using a Smith-McIntyre grab ($0.1m^2$) at 15 stations along the Dokdo coast in September 2016. The sediments consisted of badly sorted (1.7) coarse sand with gravel and the mean sediment grain size was $-0.4{\phi}$. In total, 177 macrobenthic species were collected; their mean density was $1,566ind./m^2$. The number of species and density of macrobenthic fauna decreased significantly with the mean grain size. The dominant species were the amphipods Melita denticulata (16.5%) and Melita shimizui (5.5%), polychaete Salvatoria clavata (5.4%), bivalve Glycymeris aspersa (4.4%), and ophiuroid Ophionereis dubia (4.3%). The dominant macrobenthos species on the subtidal soft-bottom differed from the coastal areas of the East Sea, suggesting that the difference in the sediment grain size affected the macrobenthos. Cluster analysis was performed to divide the study area into four groups, and environmental factors which correlated with species composition and distribution in the study area were the combination of the four parameters of salinity, dissolved oxygen, total organic carbon and depth. A future seasonal investigation is needed to understand the species composition and characteristics of the Dokdo macrobenthos.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.389-399
• /
• 2019

The calcium carbonate saturation state in the Ulleung Basin of East Sea was calculated using bottle data set of pH, dissolved inorganic carbon and total alkalinity obtained from the year 1999, 2014, 2017, and 2018 cruise. In the 2010s calcium carbonate saturation state was significantly lowered at all depth compared to the 1999 reference state. Accordingly calcite saturation horizon and aragonite saturation horizon shoaled to 500 m and 200 m, respectively. A key chemical species for the calcium carbonate saturation state, carbonate ion showed distinctive profile between upper and deep waters: it is moderately high (${\sim}175{\mu}mol\;kg^{-1}$) in upper waters and very low (< ${\sim}50{\mu}mol\;kg^{-1}$) in the deep waters. However the decreasing trend of carbonate ion concentration was pronounced in the upper water than deep waters, suggesting atmospheric $CO_2$ penetration is largely confined to the upper waters in the 2000s.

• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.204-209
• /
• 2021

Corrosion failure analysis of the flow plate, which is one of the accessories of the plate heat exchanger in a district heating system, was performed. The flow plate is made of 316 stainless steel, and water at different temperatures in the flow plate exchanges heat in a non-contact manner. The flow plate samples in which water mixing issues occurred were collected. Corrosion-induced pits, oxides, and contaminants were observed at locations where two plates are regularly in contact. The EDS analysis of the surface oxides and contaminants revealed that they were composed of carbon, silicon, and magnesium, which came from chemical adhesives. The IC/ICP analyses showed that the concentration of chloride ions was 30 ~ 40 ppm, which was not sufficient to cause corrosion of stainless steel. In the crevice, a local decrease in dissolved oxygen occurs along with an increase in chloride ions, thus forming an acidic environment. These environments destroyed the passive film of stainless steel, resulting in pits. Moreover, contaminants formed a narrower gap between the two metal plates and inhibited the diffusion of ions, thereby accelerating crevice corrosion.