• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.1-11
• /
• 2017

In this paper, design requirements of the large radar were investigated, and development was performed through the analysis and design. Large radar should be designed by bearing the 75 knot wind force and $20kg/m^2$ ice mass as operating conditions in order to meet structural stability, and driving torque and bearing load were calculated for securing the driving stability. Thermal dissipation analysis was performed considering TRM and DC-DC Converter's limitation temperature by $50^{\circ}C$ ambient temperature condition in order to attain thermal stability, and PSD and shock analysis were carried out by using MIL-STD-810G vibration and shock specification in order to transport and installation of the large radar. As a result, all components of large radar could secure the structural stability more than 2.8 factor of safety, and driving stability was also secured with adequate bearing fatigue life. Thermal stability was attained by allowable max temperature 88.7 C of the TRM, and structural stability for transportation and installation of the large radar was also secured more than 5 factor of safety. After it was transported and installed to the radar site, operating capability was finally verified by rotating the large radar.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.81-81
• /
• 2009

Non-sintered Alumina films were fabricated via inkjet printing processes without a high temperature sintering process. The packing density of these inkjet-printed alumina films measured around 60%. Polymer resin was infiltrated thru these non-sintered films in order to fill out the 40% of voids constituting the rest of the inkjet-printed films. The concept of inkjet-printed Alumina-Resin hybrid materials was designed in order to be applicable to the ceramic package substrates for 3D-system module integration which may possibly substitute LTCC-based 3D module integration. So, the dielectric properties of these inkjet-printed $Al_2O_3$ hybridmaterialsareofourgreatinterest. We have measured dielectric constant and dissipation factor of the inkjet-printed $Al_2O_3$-resinhybridfilmsbyvaryingtheamountofresininfiltratedthruthe$Al_2O_3$films.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.155-160
• /
• 1994

PZT ceramics substituted by La3+ and Nd3+ were fabricated according to the formula: [Pb1-x(La or Nd)x][Zr0.58Ti0.42]1-x/4$\square$x/4O3(x=0.00, 0.02, 0.05, 0.08, 0.15, 0.20). The crystal structure and microstructure were investigated by XRD and SEM. It was observed that the phase transitions among rhombohedral, tetragonal, and cubic symmetry occured as the substitutional quantity increased. Dielectric constant, dissipation factor and piezoelectric coefficient (d33), of each sample were measured. The dielectric properties were changed as the substitutional quanity of rare earth ion increased. These changes could be explained by crystal structure and compositional fluctuaction. Its d33 was higher at tetragonal region near to phase boundry between rhombohedral and tetragonal, which was explained by reorientation of domain wall.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1487-1489
• /
• 1998

In this paper, thin films of PI were fabricated VDPM of dry processes which are easy to control the film's thickness and hard to pollute due to volatile solvents. From FT-lR, PAA thin films fabricated by VDP were changed to PI thin films by thermal curing. From SEM, AFM and Ellipsometer experimental, as the higher curing temperatures the films thickness decreases and reflectance increases. Therefore, Pl could be fabricated stable by increasing curing temperature. The relative permitivity and dissipation loss factor were 3.7 and 0.008. Also, the resistivity was about $1.05{\times}10^{15}{\Omega}cm$ at $30^{\circ}C$.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1229-1234
• /
• 2008

In this work, ultra high-voltage (17 - 50 kV AC), reliable 80 pF mica capacitors for partial discharge system application were investigated. Mica was used as the dielectric of the capacitors. Using the conservative design rule, over 3 individual $50\;{\mu}m$ thick mica sheets with a size of 30mm{\times}35mm were used with lead foils to form a parallel capacitor element and 20 mica sheets were interleaved with lead foils to form a series stack of parallel capacitor element to meet the requirements of the capacitors. The dimensions of the fabricated 80 pF capacitors for 17 kV AC and 50 kV AC were $90\;mm{\times}90\;mm$ and $95\;mm{\times}180\;mm$, respectively. The high-frequency characteristics of the capacitance (C) and dissipation factor (D) of the developed capacitors were measured using a capacitance meter. The developed capacitors exhibited C of 79.5 - 87.5 pF, had D of 0.001% over the frequency ranges of 150 kHz to 50 MHz, had a self-resonant frequency of 65 MHz, and showed results comparable to those measured for the capacitors prepared recently by $Adwel^{Tm}$. The developed capacitors also showed excellent characteristics for thermal shock test and temperature cycling test.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.80-87
• /
• 2008

This paper investigated into the impact characteristics of the stainless sheet with thickness of 0.7 mm on the stretching boundary condition through three-dimensional finite element analysis. High speed tensile tests were carried out to obtain strain-stress relationships with the effects of the strain rate. The FE analysis was performed by the ABAQUS explicit code. In order to improve an accuracy of the FE analysis, the hyper-elastic model and the damping factor were introduced. Through the comparison of the results of the FE analyses and those of the impact tests, a proper FE model was obtained. The results of the FE analyses showed that the absorption rate of energy maintains almost 82.5-83.5% irrespective of the impact energy level and the diameter of the impact head. From the results of FE analyses, variations of stress, strain, dissipation energy, strain energy density, and local deformation characteristics in the stainless sheet during the collision and the rebound of the impact head were quantitatively examined. In addition, it was shown that the fracture of the specimen occurs when the plastic strain is 0.42 and the maximum value of the plastic dissipation energy of the specimen is nearly 1.83 J.

• 공업화학
• /
• 제17권5호
• /
• pp.539-546
• /
• 2006

전도성 고분자인 polyethylenedioxythiophene (PEDOT)을 권취형 알루미늄 콘덴서의 고체 전해질 및 음극으로 적용하기 위하여 PEDOT 중합공정 및 절연지 탄화공정 연구를 수행하였다. 단량체로 ethylenedioxythiophene (EDOT), 산화제로 ferric-p-toluenesulfonate를 사용하였다. 권취된 미세 다공성 알루미늄 에칭박 피트 내부에 균일한 PEDOT 전해질 층을 생성하기 위하여 콘덴서 소자를 열처리하여 탄화함으로써 절연지의 섬유조직을 조절하고 이를 통해 중합액의 절연지 집중현상을 억제하여 에칭 피트 내부로의 중합액 함침이 용이하도록 하였다. 탄화온도, 탄화시간에 따라 콘덴서의 용량, 손실, 등가직렬저항, 내열특성이 좌우되었다. 절연지의 두께, 밀도는 탄화공정의 중요한 변수이며 이들 변수에 따라 콘덴서의 특성이 영향을 받는 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.142-147
• /
• 2007

A series of styrene-butadiene-styrene/aluminium (SBR/Al) composites have been compounded with different weight ratios of Al. The prepared SBR-Al systems have been characterized for different mechanical properties such as tensile strength, tensile modulus and surface hardness have improved with the increase in content of Al in SBR matrix. This may is because of the increase in polymer-filler interaction. The electrical properties such as volume conductivity, surface resistivity, dielectric constant, dissipation factor (tan delta), and break down voltage of SBR/Al composites have been measured with reference to volume fraction $(V_{f}),$ frequency and temperature. The resistance of the SBR-Al composites is found to be ohmic. The voltage-current (V-I) characteristics for SBR-Al also exhibit a linear relationship indicating the ohmic behavior.

• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.194-199
• /
• 2009

본 논문에서는 부분방전 시스템 응용을 위한 특 고압 80 pF (17kV AC) 마이카 커패시터를 연구하였다. 그리고 커패시터를 설계하기 위한 프로그램이 직병렬 파라미터를 추출하도록 개발되었다. 마이카는 커패시터의 유전체로 사용되었다. 30mm$\times$35mm 크키의 50$\mu$m 두께 마이카 시트가 병렬 커패시터 요소를 형성하도록 연박과 사용되었다. 20개의 마이카 시트는 커패시터의 요구에 맞추어 병렬 커패시터 요소의 직렬 스택을 형성하도록 연박으로 분리되었다. 17kV AC에 대한 제작된 80pF 커패시터의 크기는 90mm$\times$90mm이다. 제작된 커패시터에 대한 커패시턴스(C)와 손실률(D)의 고주파수 특성은 커패시턴스 메타를 사용하여 측정되었다. 제작된 커패시터는 150kHz$\sim$50MHz 주파수 범위에서 79.5pF의 커패시턴스와 0.001%의 손실률을 갖고, 65MHz에서 자기공진주파수를 가진다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.638-644
• /
• 2019

본 연구에서는 전산유체역학 해석을 이용하여 알루미늄 피라미드 트러스 심재 샌드위치의 열유동 특성을 분석하였다. 규칙적 다공질 금속인 피라미드 트러스 코어를 샌드위치 구조물에 채용할 경우 공기 매질이 자유롭게 유입, 유출될 수 있는 개방형 코어인 점을 고려하여 하중을 지지할 수 있는 구조성능과 함께 방열체로서 다기능성을 구현할 수 있는 구조가 된다. 따라서, 유입되는 공기의 속도변화, 설계변수인 트러스각에 따른 압력강하와 열전달 메카니즘을 확인하기 위해 ANSYS/Fluent를 이용하여 수치해석을 실시하였다. 해석모델에 사용된 샌드위치 패널은 알루미늄으로 이루어져 있으며, 샌드위치 패널의 위 면재와 아래 면재 사이에는 15개의 피라미드 트러스 유닛셀이 반복되고 있다. 폭 방향으로는 무한히 넓은 유닛셀을 모사하기 위해 대칭조건을 지정하였으며, 입구에는 균일한 속도분포를 경계조건으로 입력하였다. 해석결과 입구부와 첫 유닛셀까지의 구간에서 입구영향이 관찰되었으며, 입구영향을 배제하고 마찰계수와 누셀수를 분석하였다. 공기의 속도가 증가할수록 마찰계수는 감소하였으며, 누셀수는 증가하는 경향을 보인다. 한편, V=1m/s에서 5m/s에서의 마찰계수와 누셀수 변화가 확연하였으며, 이는 층류에서 난류로 유동패턴이 변하기 때문에 거시적으로 열전도보다 대류열전달의 비중이 커졌기 때문이다. 또한, 설계변수인 트러스각에 대해서는 의미가 있을 정도의 마찰계수와 누셀수의 변화는 관찰되지 않았다. 따라서, 트러스각이 강도, 강성 등 구조성능에 민감한 점을 감안하면 다기능성을 염두에 둔 알루미늄 피라미드트러스 심재 설계 시 설계변수의 변화는 구조성능에 더 민감할 것으로 판단된다.