• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.135-143
• /
• 2018

Objectives: There have been many studies on exposure assessment of workers at companies using asbestos as a raw material and at sites of the removal of materials containing asbestos. However, no research has been carried out on the asbestos exposure of workers in industries involving asbestos-containing waste, such as workers at collection and transportation service companies, mid-treatment companies(solidification of asbestos-containing waste), and landfill sites. The objective of this study was to assess the asbestos exposure concentrations of workers in industries handling waste containing asbestos. Methods: For this study, we carried out field investigations at 15 companies: seven collection and transportation service companies, three mid-treatment companies, and five final treatment companies(landfill sites). We took both personal and area samples. Results: The range of asbestos exposure levels of workers handing asbestos-containing wastes at collection, mid-treatment, and landfill companies were 0.000 fibers/cc-0.009 fibers/cc, 0.000 fibers/cc-0.038 fibers/cc, and 0.000 fibers/cc-0.024 fibers/cc, respectively. Conclusions: The asbestos exposure levels of workers at mid-treatment companies were higher than those at collection and transportation companies and at final treatment companies. In the case of collection and transportation workers, the possibility of exposure to levels exceeding those found in the present study is not particularly high considering the characteristics of the work. However, in the case of intermediate or final disposal workers, it is considered that there is a possibility of exposure to levels above those found in this study.

• Environmental and Resource Economics Review
• /
• v.12 no.2
• /
• pp.347-382
• /
• 2003

The paper presents available options that Korea can adopt in an effort to promote eco-industrial development in a near future. What is missing and the reasons why Korea is behind the other countries in the area are: 1) Lack of holistic view and the integrated approach toward economy and environment in policy implementation, 2) Lack of understanding, among entrepreneurs, of the concept of productivity per input resource, and the fact that not only labor and capital productivity but also the total productivity enhancement is vital for industry's competitive edge; There has been no driving force in the market to develop economies of system integration to turn industrial wastes to valuable input resources, 3) Unsupportive regulatory system regarding the trade of by products, and 4) Lack of financing and incentive mechanism. 5) Lack of information forum. Regulatory reform should be taken for the direction that in effect increase the price of disposal and motivate firms to seek symbiotic relationship with other firms, and facilitate trade by-product between firms. Financing and incentive mechanism should be introduced in order for the industry to find easy access to the opportunities for organizing the network to transform wastes in negative value to the value added resources. Also information network should be established to provide a market for by-product exchange and public education to improve industry's environmental performance.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.4
• /
• pp.41-51
• /
• 2016

This The purpose of this study is to evaluate user satisfaction with village bathhouses, selected from a two-year pilot project of common facilities for senior in rural areas from 2014 to 2015. A survey was conducted using a questionnaire to evaluate user satisfaction, and 135 questionnaires were collected from 18 common meal facilities. User satisfaction was evaluated in five categories with a five-point scale: location and spatial composition; emotions and intimacy; safety; nutrition; and maintenance and management. The results are as follows. First, when overall user satisfaction was evaluated on a five-point scale, the average score stood at 4.24 out of five points and 90.03 out of 100 points. These findings suggest that users were generally satisfied with the common meal facilities. Among five categories, scores except safety stood at four points or higher, indicating higher user satisfaction. Second, communal meal in rural areas have been carried out already but the environment for communal meal like cooking equipment, wastewater disposal, and space have been poor. However, the environment is improved through this pilot project, which has a positive effect to user satisfaction. Third, space planning for barrier-free or sanitary in storage of food containers are not adequate, which is necessary to detailed planning and concrete guideline.

• Journal of Environmental Impact Assessment
• /
• v.11 no.1
• /
• pp.25-36
• /
• 2002

The purpose of this study is to assess the environmental carrying capacity of Chongju City for the environmental management and the urban growth management. The urban environmental carrying capacity assessment of the city by the index of ecological footprint(EF), shows that the ecosystem of the city has been overloaded and most of the deficiencies has come from outside of the city. The EF index, the area of land per capita required for production and consumption in the city, was 1.731 ha per capita in 1989 and 1.901 ha per capita in 1999. On the other side, the ecologically productive land is 0.0175 ha per capita. It means that every citizen owes 1.88 ha per capita to the ecosystem in 1999. The land consumption of the city has increased by 0.1705 ha per capita during the last 10 years. The capacity of infrastructure and the service supply estimated by the Onishi model does not exceed the demand of the city in 1999. But the rapidly increasing population and fast urban growth need the expansion of the capacity. The water supply capacity of the city appears to be sufficient in 1999, but the water supply demand will increase in the future. The capacity of sewage treatment facilities seems to be sufficient, but the higher level of sewage treatment facilities should be adopted for the improvement of water quality as the generation of sewage will increase and its characteristics will also make the wastewater treatment difficult. Due to the decrease of solid waste generated, the land fill capacity for solid waste disposal is not insufficient at present, but the capacity will be saturated in the near future. Therefore, the scientific management system of solid wastes should be introduced. The air quality of the city meets both the national air quality standard and WHO recommendation standard, but the strong regulation and control of automobile emission gas such as CO, $CO_2$, NOx and HC is required for clean air.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.134-148
• /
• 2008

The state of in situ stress is an important factor in considering the suitability of a site as a geological repository for nuclear waste. In this study, three-dimensional distinct numerical analysis was conducted to investigate the effect of deformation zones on the state of stress in the Oskarshamn area, which is one of two candidate sites in Sweden. A discontinuum numerical model was constructed by explicitly representing the numerous deformation zones identified from site investigation and far-field tectonic stress was applied in the constructed model. The numerical model successfully captured the variation of measured stress often observed in the rock mass containing large-scale fractures, which shows that numerical analysis can be an effective tool in improving the understanding of the state of stresses. Discrepancies between measured and modelled stress are attributed to the inconsistent quality of measured stress, uncertainty in geological geometry. and input data for fractures.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.8
• /
• pp.1045-1059
• /
• 2021

Various abiotic stressors like drought, salinity, temperature, and heavy metals are major environmental stresses that affect agricultural productivity and crop yields all over the world. Continuous changes in climatic conditions put selective pressure on the microbial ecosystem to produce exopolysaccharides. Apart from soil aggregation, exopolysaccharide (EPS) production also helps in increasing water permeability, nutrient uptake by roots, soil stability, soil fertility, plant biomass, chlorophyll content, root and shoot length, and surface area of leaves while also helping maintain metabolic and physiological activities during drought stress. EPS-producing microbes can impart salt tolerance to plants by binding to sodium ions in the soil and preventing these ions from reaching the stem, thereby decreasing sodium absorption from the soil and increasing nutrient uptake by the roots. Biofilm formation in high-salinity soils increases cell viability, enhances soil fertility, and promotes plant growth and development. The third environmental stressor is presence of heavy metals in the soil due to improper industrial waste disposal practices that are toxic for plants. EPS production by soil bacteria can result in the biomineralization of metal ions, thereby imparting metal stress tolerance to plants. Finally, high temperatures can also affect agricultural productivity by decreasing plant metabolism, seedling growth, and seed germination. The present review discusses the role of exopolysaccharide-producing plant growth-promoting bacteria in modulating plant growth and development in plants and alleviating extreme abiotic stress condition. The review suggests exploring the potential of EPS-producing bacteria for multiple abiotic stress management strategies.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2019

Purpose: Clinical laboratory in hospital has taken a great role in protection of chronic disease. as well as diagnosis and treatment, And laboratory layout has been considered by the management and laboratory section more than the function and workflow. Methods: So this study figures out the workflows of laboratory sections in the recently upgraded Laboratory Medicine, and searches the functional relationships and spatial block diagram between each disciplines as follows. Literature review and expert adviser has been conducted. Results: 1) Laboratory type of Laboratory Medicine is divided into routine and specialized laboratory according to the workflow by automated or specialized test. 2) The general workflow consists of specimen collection, specimen classification, test by discipline, test report, and specimen disposal. 3) Though the function of each laboratory section is very complicated and specific, the characteristics and the workflow can be shown in detail by each lab through [Figure 4], [Figure 5], [Figure 6], [Figure 7], and [Figure 8]. 4) Functional relationship diagram can be displayed to the adjacency and relation between each laboratory and support spaces. 5) The spatial block diagram could be presented as shown in [Figure 10], in which the emergency lab lay in front side, routine lab in the central open area, and specialized lab in the behind side. Implications: This study can be used as a useful data in planning and designing a Laboratory Medicine Department.

• Knowledge Management Research
• /
• v.22 no.2
• /
• pp.209-225
• /
• 2021

Product Lifecycle Management is a well-defined management method consisting of 8 knowledge areas. Since the 4th industrial revolution is closely related to smart factories, the importance of product lifecycle management, which effectively manages the entire process from product idea generation to disposal, is emerging. This study analyzed the current and future applications of the knowledge domain of product life cycle management from the perspective of the 4th industrial revolution for experts in the field of product life cycle management. The expert's perception was analyzed from the current point of view and the future point of view to see how the product life cycle management knowledge area is applied in the field. The current and future application degree of the knowledge domain of product life cycle management was analyzed, and whether there was a difference between the knowledge domains in terms of the level of application was analyzed. Based on the analyzed results, its meaning and future flow are presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.24-35
• /
• 2021

Due to increasing awareness on the treatment of end-of-use/life products, disassembly has been a fast-growing research area of interest for many researchers over recent decades. This paper introduces a novel lot-sizing problem that has not been studied in the literature, which is the service-parts lot-sizing with disassembly option. The disassembly option implies that the demands of service parts can be fulfilled by newly manufactured parts, but also by disassembled parts. The disassembled parts are the ones recovered after the disassembly of end-of-use/life products. The objective of the considered problem is to maximize the total profit, i.e., the revenue of selling the service parts minus the total cost of the fixed setup, production, disassembly, inventory holding, and disposal over a planning horizon. This paper proves that the single-period version of the considered problem is NP-hard and suggests a heuristic by combining a simulated annealing algorithm and a linear-programming relaxation. Computational experiment results show that the heuristic generates near-optimal solutions within reasonable computation time, which implies that the heuristic is a viable optimization tool for the service parts inventory management. In addition, sensitivity analyses indicate that deciding an appropriate price of disassembled parts and an appropriate collection amount of EOLs are very important for sustainable service parts systems.