• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.203-206
• /
• 1996

The purpose of this paper is to find how to determine the parameters of the basic control system design such as hinge moment coefficients and to display the controllability of the ChangCong-91. Since the estimation from the flight test of real aircraft is the most reliable, we performed the flight test of ChangGong-91 to get the various parameters such as velocity, height, control force, control surface deflection, 3 axis acceleration, 3 axis angular rate, pitch angle, angle of attack temperature and so on. We recorded the flight test data in VHS tapes and stored them to personal computer using A/D(analog to digital) converter. Flight test was done in various conditions, and the acquired data was processed with parameter identification method such as least square method. These data will be utilized for the development of Autopilot System design and Control Loading System design.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.65-72
• /
• 2005

On this research, we show some concrete examples as software design, 2D/3D display, graph display, and gage display to develop a data monitoring system for real time safe fire testing. Developed software which is simulation software for live fire testing, has been designed to display informations about whole test status in a live fire testing, and with this, user can control a live fire testing under the safe environment. Beside, we increase a security by using a authority of user to access on this software. and we develop it based on module designed to apply a requirement of user later on.

• 한국정밀공학회지
• /
• 제4권4호
• /
• pp.25-35
• /
• 1987

This paper deals with the design of the digital controller for DC servo motor, and it is implemented for the cartesian coordinate 4 axes manipulator. A design method of the controller is adopted an algorithm using the digital position locked loop(DPLL) method and the linear PID control for the smooth motion. To simplify the hardware configuration of control system, 8279 keyboard/display controller, Z-80 CTC counter and 8255 PPI are used. Therefore the design method to control each motor as real-time is presented. To show effectiveness of the design, the PWM circuit and frequency/voltage converter are applied for the velocity control of robot system. When the proposed controller is applied to the 4-axes manipulator, it reveals that the error probabilities of X, Y and Z axis as 0.033%, 0.023% and 0.028% respectively.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.97-99
• /
• 2002

• 한국항공우주학회지
• /
• 제39권11호
• /
• pp.1060-1068
• /
• 2011

본 논문에서는 실시간 운영체제(Real Time Operating System, RTOS)기반의 실시간 임베디드 시스템용 자바 가상 머신(Jamaica Virtual Machine, JVM)을 이용한 비행운용 프로그램(Operational Flight Program, OFP)의 객체 지향적 개발사례에 대해 기술하였다. 국산화 임무 컴퓨터(Mission Computer, MC)에는 다기능 시현(Multi Functional Display, MFD), 통합 전방 상향 제어(Integrated Up-Front Control, IUFC), 전방 시현(Head-Up Display, HUD) 및 화력 제어(Fire Control, FC)를 지원하는 OFP가 각각의 프로세스에 탑재되어 구동되는데, 본 논문에서는 자바(Java) 기반의 MFD OFP(다기능 시현기에 조종사 참고 정보를 제공하는 비행운용 프로그램)와 미들웨어의 설계 및 구현에 대하여 기술하였다.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.563-569
• /
• 2011

Objective: This study focuses on the effects of pre-cues informing the location of upcoming visual stimulus on finger movement response in the context of control-on-display interfaces. Background: Previous research on pre-cues focus on attention allocation and motion studies were limited to indirect control conditions. The design of this study aimed to collect data on the exact landing point for finger-tap responses to a given visual stimulus. Method: Controlled visual stimuli and tasks were presented on a UI evaluation system built using mobile web standards; response accuracy and response time were measured and collected as appropriate. Among the 16 recruited participants, 11 completed the experiment. Results: Providing pre-cue on the location of stimulus affected response time and response accuracy. The response bias, which is a distance from the center of stimulus to the finger-tap location, was larger when the pre-cue was given during a one-handed operation. Conclusion: Given a pre-cue, response time decreases, but with accuracy penalized. Application: In designing touch-screen UI's - more strictly, visual components also acting as controllers - designers would do well to balance human perceptual and cognitive characteristics strategically.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.17-22
• /
• 2007

Vibration isolation equipments are mostly required in precise measurement and manufacturing system. Among all the vibration isolation equipments, air-spring is the most widely used equipment because of low resonant frequency and high damping ratio. In this study, we used Takagi-Sugeno fuzzy method to design an active vibration isolation system using air-spring, and compared the fuzzy method with passive control method and PID control method. Due to the non-linearity characteristics of air-spring, fuzzy controller was verified to be the most effective both in simulation and experiment.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.86-91
• /
• 2016

End milling is an important and common machining operation because of its versatility and capability to produce various profiles and curved surfaces. This paper presents an experimental study of the cutting force variations in the end milling of SM25C with HSS(high speed steel) and carbide tool. This paper involves a study of the Taguchi design application to optimize cutting force in a end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer resources than a factorial design. This study included feed rate, spindle speed and depth of cut as control factors, and the noise factors were different cutting tool in the same specification. An orthogonal array of $L_9(3^3)$ of ANOVA analyses were carried out to identify the significant factors affecting cutting force, and the optimal cutting combination was determined by seeking the best cutting force and signal-to-noise ratio. Finally, confirmation tests verified that the Taguchi design was successful in optimizing end milling parameters for cutting force.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1322-1325
• /
• 2009

Adaptive black band insertion improve blur phenomenon that caused by hold type issue of LCD, the approach regulate charge time by OE signal to control black inserted ratio, and the charge time be modified according the motion quantity of displaying content.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.1053-1057
• /
• 2007

One of the important roles of glass is safety guarantee in CRTs. It is working under high vacuum and has to be maintained continuously for the atmosphere pressure, humidity, and excitation etc,. This paper propose to CRTs glass design method via the stress positioning control for slim CRTs using FEM to ensure the national safety standard and newly demanded safety standard by CRTs set makers.