• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.6
• /
• pp.267-273
• /
• 2003

The plasma display panel with the electrode structure of new discharge AND gate and its driving scheme were proposed and the driving system for experiment was developed. And operation of these discharge AND gate was verified by the experiment of PDP addressing with floating electrode. This discharge AND gate operated by the operation speed of 8$mutextrm{s}$ and the operation margin of 100V. The address operation margin of 10V also obtained. It was known to be able to control the discharge of the adjoining scan electrode accurately. Because proposed method uses the DC discharge the control of the discharge can be facilitated compared with conventional discharge AND gate. Moreover, because the input discharge and the output discharge of discharge gate are separate, the display discharge can be prevented from passing discharge gates. Therefore, it is possible to apply to the large screen plasma display panel. And the decrease of contrast ratio does not occur because the scanning discharge does not influence the picture quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.220-224
• /
• 2005

The technology trend of Flat Panel Display (FPD) equipments have been demanded that there are compact and multi-function. Therefore, nano/micro scale patterned on polymeric materials of Back Light Unit (BLU) in Liquid Crystal Display (LCD) that has been investigated. This paper describes a series of Horizontal Type Micro Tensile Tester that were carried out to investigate the load strain distance performance of typical polymeric material sheets. The polymeric materials film that micro size shaped specimens for tensile test are used by Cold-Isostatic-Press (CIP). Test equipment is Horizontal type Micro Tensile Tester that is presented to measure the micro scale mechanical property of thin film for FPD. This paper presents which easy testing tools measure for micro patterned on polyethylene (PET) specimens.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1789-1791
• /
• 2007

We fabricated OTFT-OLED display panel by using Ag-paste for source and drains electrode of OTFTs. The OTFTs were fabricated by solution processes such as spin-coating for PVP gate dielectric and screen printing for S/D electrodes with Ag-paste, except pentacene active layer which was deposited by evaporation. The mobility was 0.024 cm2/V.sec , off state current ${\sim}10-11A$, threshold voltage 7.6 V and on/off current ratio ${\sim}105$. The panel consisted of 16 x 16 pixels and each pixel consisted of 2 OTFTs, 1 Capacitor and 1 OLED. The pixels successfully worked in terms of current magnitude supplied to OLED and the control ability of driving and switching OTFTs.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.148-149
• /
• 2006

TFT-LCD BLU has been remarkably developed for a recent few years as TFT-LCD market is increased. Recently new BLU technologies and components are developed as more aggressively than before since TFT-LCD panel requires higher quality and resolution. Especially Samsung Electronics and LG Philips LCD of Korea are major LCD panel makers and the major optical materials of LCD BLU and panel for Samsung Electronics have been supplied by Samsung Cheil Industries. In this presentation introduction to main components of LCD BLU will be investigated details. Also characteristics and applications of optical polymers such as PMMA, PET etc for LCD display will be included and finally recent trends in optical materials for LCD BLU will be shown briefly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.823-826
• /
• 2008

Phosphate glass added the various alkali additives is one of the substitutive materials for the barrier-ribs in plasma display panel. The results of differential thermal analysis and coefficient of thermal expansion show that the alkali oxides affect the thermal properties of phosphate glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1479-1482
• /
• 2006

Potentials and advantages of recently proposed raised bus electrode plasma display panel is discussed in terms of luminous efficiency, addressing speed. Detailed experimental and simulation results, which shows mechanisms of high efficiency driving mechanism, will also be given. Apart from the cell structure, we introduce new high efficiency driving method that can be applicable to conventional ac Plasma Display Panel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.524-530
• /
• 2015

We propose a three-electrode type electronic paper display and its fabrication process to realize single color at the same display panel. We establish a fabrication process with the mixing of electronic ink, loading of this ink, electronic ink assembly, packaging and driving. Also, we discuss an operating principle of this panel and the induced image reversal phenomenon by electric field area of the lower electrodes. This phenomenon is not occurred for the panel having $10{\mu}m$ electrode space. By this pixelation structure like this three-electronic paper display, a single color realization without color filter is possible and various kind of color is defined by a dye selection for charged particles and electrically neutral fluid.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.249-250
• /
• 2006

Recently FPD(Flat Panel Display) is used in various field to display enormous information. So cutting technique of flat panel display is needed for producing variety display merchandises. In present, cutting methods of flat panel glass includes breaking process. But this process occurs many glass particles. This glass particles are directly related badness of merchandise and falling productivity. In this paper, to cut front substrate glass of LCD and to get optimized cutting condition are tried fur eliminating breaking process with developed glass cutting machine using a Piezoelectric ceramics actuator. It is known that the vibration of Piezoelectric Ceramic have effect in crack proceeding through the analysis of fracture section.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.711-712
• /
• 2009

The fabrication of micro-scale irregular holes by using PMMA (Poly Methyl Methacrylate) beads in the front dielectric layer was proposed to improve luminous efficacy of an ac plasma display panel. Through the firing process of front dielectric layer, bowl shaped holes with a depth of $2.5{\mu}m$, a top diameter of $8-12{\mu}m$, and a bottom diameter of $4-7{\mu}m$ were fabricated. The proposed ac plasma display panel with the irregular micro-scale holes improved the luminous efficacy by 18 % due to the decrease in the minimum sustain voltage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.706-709
• /
• 2007

Different from the LCD that have two glass substrates on the top and the bottom, EPD have an advantage that is using the bottom glass substrate and the top e-ink sheet. So, it is impossible to apply R or C type TSP that need bottom and top glass plane. We successfully implemented the TSP (Touch Screen Panel) based on the light over the EPD (Electro Phoretic Display).