• Photonics industry news
• /
• s.34
• /
• pp.12-17
• /
• 2006

대만은 광산업 분야를 OE(Optoelectronics Components, FPD(Flat Panel Display), Optical Storage, Optical Lens Components & Laser Applications, OFC(Optical Fiber Communications, Optical Input & Output Devices 등 6개 대분류로 나누고 있으며 수년간 중점적으로 육성해 온 분야는 OE 및 FPD와 관련이 큰 LED 분야이다.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.10-14
• /
• 2007

LCD performance is generally evaluated in terms of luminance and color versus viewing angle. In the present paper, we show that this type of display can be favorably characterized in terms of polarization. We show that ELDIM EZContrast instrument which is routinely used for viewing angle measurements can be upgrade for measuring the polarization state of the light at each incidence and azimuth angle. More precisely, the degree of polarization of light, its ellipticity and polarization direction can be measured at each incidence angle between 0 and $88^{\circ}$ and for all the azimuth angles (from 0 to $360^{\circ}$). Important differences between the displays can be detected and related to their internal structures when luminance and color profiles are quite similar. The same setup can also be used to characterize optical components of the LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.457-459
• /
• 2005

Low viscosity LCs have been developed for fast response time improvement of the TFT-LCD Monitors based on TN mode. This low viscosity characteristic s cause the pretilt angle to be changed and the uniformity to degrade. We have studied on the pretilt angle effect by the various components used for low viscosity LCs. We prepared the panels by using these various components and measured pretilt angle for this research. As a result of this research, we have found out that each low viscosity component has the different pretilt angle level and uniformity. For good display quality, it is important to keep the stable pretilt angle. The low viscosity LCs with this stable pretilt angle make it possible to prepare the high performance TFT-LCD Monitor with both fast response time characteristics and good display quality

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1558-1563
• /
• 2018

We demonstrate improved surface pit and phase separation in thick InGaN grown on a GaN/Si (111) substrate, using plasma-assisted molecular beam epitaxy with an indium modulation technique. The formation of surface pit and compositional inhomogeneity in the InGaN epilayer are investigated using atomic force microscopy, scanning electron microscopy and temperature-dependent photoluminescence. Indium elemental mapping directly reveals that poor compositional homogeneity occurs near the pits. The indium-modulation epitaxy of InGaN minimizes the surface indium segregation, leading to the reduction in pit density and size. The phase separation in InGaN with a higher pit density is significantly suppressed, suggesting that the pit formation and the phase separation are correlated. We propose an indium migration model for the correlation between surface pit and phase separation in InGaN.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.483-488
• /
• 1999

The optimal mixing condition of four components gas(Ne,Xe,He,Ar) in PDPs was caculated by a numerical simulation method. The dominated reactions in which $Xe^*(^3P_1)$ is produced and decays were investigated in three components gas (Ne,Xe,He) and our new components gas (Ne,Xe,He,Ar). A peak point of $Xe^*$ density appears in the range of 0.1% to 2% of Ar mixture ratio. The results of simulation show that the direct exitation of Xe by electrons has the greatest influence on the inceasing $Xe^*$ density in both gas mixtures.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.67-72
• /
• 2015

For the development of UFS device test system, M-PHY specifications should be matched with MIPI-standard which is analog signal protocol. In this paper, the implementation methodology and hardware structure for the M-PHY AFE (Analog Front End) Block was suggested that it can be implemented using universal components without ASIC process. The testing procedure has a jitter problem so to solve the problems we using ASIC process, normally but the ASIC process needs a lot of developing cost making the UFS device test system. In is paper, the suggestion was verified by the output signal which was compared to the MIPI-standard on the Prototype-board using universal components. The board was reduced the jitter on the condition of HS-TX and 5.824 Gbps Mode in SerDes (Serialize-deserializer). Finally, the suggestion and developed AFE block have a useful better than ASIC process on developing costs of the industrial UFS device test system.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.1-5
• /
• 2011

Electronics in modern life have become more miniaturized and precise and new technology of electronic components has made these trends possible. The explosive demand of electronic components needs more high-speed and accurate performance of manufacturing processes. For high-speed actuation, solenoids, voice coil motors and piezo motors have been used. A solenoid actuator characterized by low price, available small size, and convenience is one of the main components of production equipments requiring compact and high-speed actuators. Since these actuators show millisecond order responsiveness, the improvement of 1~2msec is very important in industrial applications. In this paper, the mathematical model of the solenoid is formulated and simulated using SIMULINK$^{(R)}$. To verify the model, the responses for step input with open-loop control is obtained and compared with the simulation result. In order to improve the responsiveness, Hold voltage method is introduced and optimal value between spring constant and hold voltage is suggested.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.113-118
• /
• 2011

This paper proposes computer visual inspection algorithms for PCB defects which are found in a manufacturing process. The proposed method can detect open circuit and short circuit on bare PCB without using any reference images. It performs adaptive threshold processing for the ROI (Region of Interest) of a target image, median filtering to remove noises, and then analyzes connected components of the binary image. In this paper, the connected components of circuit pattern are defined as 6 types. The proposed method classifies the connected components of the target image into 6 types, and determines an unclassified component as a defect of the circuit. The analysis of the original target image detects open circuits, while the analysis of the complement image finds short circuits. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.39-44
• /
• 2012

Electronics in modern lives have become more miniaturized and precise. Multi Layered Ceramic Capacitor (MLCC) occupies 50% of electronic components consisting of electronics. This high volume of the production needs high speed and more precise machine performances. The dominate parts of the production equipments are the module transporting components and the visual inspection module. Most visual inspection has been off-line because of the image processing time. In this paper, a new image processing method is proposed to reduce thousands of matrix calculation for image processing and realize on-line high speed inspection.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.4
• /
• pp.49-54
• /
• 2014

This paper proposes a new color segmentation method of vehicle license plates in the RGB color space. Firstly, the proposed method shifts the histogram of an input image rightwards and then stretches the image of the histogram slide. Secondly, the method separates each of the three RGB color components and performs the adaptive threshold processing with the three components, respectively. Finally, it combines the three components under the condition of making up a segment color and removes noises with the morphological processing. The proposed method is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiments were conducted by using real vehicle images. The results show that the proposed algorithm is successful for most vehicle images. However, the method fails in some vehicles when the body and the license plate have the same color.