• Science of Emotion and Sensibility
• /
• v.9 no.4
• /
• pp.341-351
• /
• 2006

The effect of color evokes a certain feeling and affects behavior. Especially, an understanding and applying color are critical because well-designed color substantially contributes to quality and usability. In this study, the effects of three color components(hue, value, and chroma) on apparent warmth were investigated separately and relatively, and then feasibility of applying to the information display was examined. The result showed that the apparent warmth of 10 Hues was a U-shaped function declining from Red to Purple-Blue and increasing from Purple-Blue to Red-Purple with following order of color-circle. Chroma made the character of hues remarkably clear, so warm color becomes warmer and cool color becomes cooler if chroma gets higher. But value has no effect on warmth. These results propose that we can change the apparent warmth by varying chroma in the limitation of color use. And there was a sharp distinction between warm and cool color, Meanwhile, in the reading task of the graphical information, the subjects' judgment distortion overestimating or underestimating the actual degrees was ascertained. This result should be applied to control operator's sensitivity in accordance with the purpose of task and display.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.62-66
• /
• 2016

Optical system needs to be aligned before its undergoing process, is usually shows coma aberrations, which occurred due to imperfection in the lens or other components results in off-axis point sources, appearing to have a tail like a comet. There are some methods to correct coma aberration. In this paper, to correct coma aberration in optical system, using a robot arm type coordinate measuring machine(CMM). CMMs are widely used to measure the form of accuracy of parts and positioning accuracy of systems. Among them, robot arm type CMM has more advantages than the others, such as its mobility and measuring range. However, robot arm type CMM has lower accuracy than cantilever type CMM. To prove robot arm type CMM's accuracy, several factors were suggested in this paper and the final measuring results were compared to a commercial cantilever type CMM. Based on this accuracy, a typical optical system was successfully aligned by using our robot arm type CMM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.82-85
• /
• 2014

With high speed communication network and supplement of high quality multimedia devices, large demand of multimedia service stimulates digital signing industry to step forward to new opportunities. But in order to provide competitive quality services, Integrated management system is required. Digital signs use technologies such as LCD, LED and Projection to display content such as digital images, video, streaming media, and information. Digital signs rely on a variety of hardware to deliver the contents. The components of a typical digital sign installation include one or more display screens, one or more media players, and a content management server for each player. To improve the existing high cost and less efficient management system, this paper suggest cost effective Integrated Digital Signage Management System with the results of analysis of existing system. Also this paper presents an actual implementation on entertainment company to evaluate the suitability, to prove the result of superior performance of proposed system.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2022

In manufacturing and semiconductor industries, transfer robots increase productivity through accurate and continuous work. Due to the nature of the semiconductor process, there are environments where humans cannot intervene to maintain internal temperature and humidity in a clean room. So, transport robots take responsibility over humans. In such an environment where the manpower of the process is cutting down, the lack of maintenance and management technology of the machine may adversely affect the production, and that's why it is necessary to develop a technology for the machine failure diagnosis system. Therefore, this paper tries to identify various causes of failure of transport robots that are widely used in semiconductor automation, and the Prognostics and Health Management (PHM) method is considered for determining and predicting the process of failures. The robot mainly fails in the driving unit due to long-term repetitive motion, and the core components of the driving unit are motors and gear reducer. A simulation drive unit was manufactured and tested around this component and then applied to 6-axis vertical multi-joint robots used in actual industrial sites. Vibration data was collected for each cause of failure of the robot, and then the collected data was processed through signal processing and frequency analysis. The processed data can determine the fault of the robot by utilizing machine learning algorithms such as SVM (Support Vector Machine) and KNN (K-Nearest Neighbor). As a result, the PHM environment was built based on machine learning algorithms using SVM and KNN, confirming that failure prediction was partially possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Culinary science and hospitality research
• /
• v.16 no.3
• /
• pp.218-236
• /
• 2010

The concept of food coordination was introduced at the end of the 1990s and has generated a great deal of interest until now. However, no standard for the classification of such studies has been established yet. This study was conducted to examine the trends in food coordination studies published from 2000 to 2008. To accomplish this, approximately 335 food coordination articles were reviewed. Classification based on content analysis and the document review were conducted based on study themes(subjects), study forms, study designs, places of application, survey area and sample types. The most important type of study identified in this review was study themes. The themes of the study were divided into the following 10 subjects: 1) studies on the definition and recognition of food coordination, 2) studies on the environment, 3) studies on colors and package designs, 4) studies on table setting, table manner and etiquette, 5) studies on photography, editorial design, identity design and menu, 6) studies on components of dining atmosphere display and table/glass ware, 7) studies on emotions and sensibility, the five senses and food coordination, 8) studies on human resources, 9) studies on reviews, food & culture and education, 10) studies on purchasing, consumer behavior and marketing. The most common subjects were the components of dining atmosphere display and table/glass ware(23.6%). In addition, 17% of the articles reviewed were conducted to study colors and package designs, 14.6% to evaluate purchasing and consumer behavior and marketing, 13.4% to evaluate the environment, and 9.6% to study food & culture and education. Overall, these five subjects accounted for more than 75% of the articles reviewed.

• Journal of Life Science
• /
• v.21 no.10
• /
• pp.1355-1363
• /
• 2011

Many clinical trials have demonstrated the beneficial effects of garlic (Allium sativum) on general cardiovascular health. Aged garlic extract (AGE) is known to display diverse biological activities such as in antioxidant, anti-inflammatory and anticancer activities. However, few studies have been directed on the effect of AGE on cardiovascular function. In this study, we aimed to investigate the effect of AGE and its components on platelet activation, a key contributor in thrombotic diseases. In freshly isolated rat platelets, AGE and its components have shown inhibitory activities on thrombin-induced platelet aggregation. These in vitro results were further confirmed in an in vivo platelet aggregation measurement where tail vein injection of garlic oil and S-Allylmercapto-cysteine (SAMC) significantly reduced thrombin and ADP-induced platelet aggregation. Potential active components for antiplatelet effects of AGE were identified to be SAMC and diallyl sulphide through agonist-induced platelet aggregation assay. These results indicate that aged garlic extract can be a novel dietary supplement for the prevention of cardiovascular risks and the improvement of blood circulation.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.855-861
• /
• 2009

This paper presents the concept of dynamically reconfigurable space by introducing smart building components. Thanks to the advances in ubiquitous computing and ITC technology, we are able to expect, in the near future, the aspects of future buildings which may transform their appearance and states to perform specific functions. In other words, it is certain that the building space will actively reconfigure itself to accommodate user's needs once we acquire proper technologies. Based on the assumption that building components may not be transformed through the magical process, but change its physical states (e.g. transparency, illumination, display contents, etc.) and functions of embedded devices (e.g. audio, actuators, sensors, etc.), we can envision a dynamically reconfigurable smart space. In order to conceptualize such spaces, critical surveys have been conducted on current works of leading architects. When the room needs to be used as a specific function room, the components need to change theirs states or to behave in a certain manner to create an optimum environment. Our model defines the relationships and elements to describe the mechanism of reconfigurable space. We expect this model provides a conceptual guideline for developing a smart building components based on spatial service scenarios. Therefore, a future smart spaces implemented by integrating various technologies are not designed in deterministic manner, so that spatial functions are expanded without constrained by physical existence.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.424-432
• /
• 2007

Luminance properties of external electrode fluorescent lamps and optical components in backlight unit (BLU) and optical transmission rates of optical sheets, are investigated for LCD-TV of 32" in diagonal with WXGA level resolution (1366$\times$768). The luminance is measured in 12-lamps and 18-lamps of BLU. The luminance uniformity preserves about 85 % in the 12-lamps backlight, while the luminance of optical components and the efficiency of backlight in the 12-lamps are lower than those in the 18-lamps backlight. When the lamp luminance in BLU having 12-lamps and 18-lamps is normalized as 100 %, the relative luminance of a diffusion plate, a diffusion sheet, a prism sheet (BEF), a polarization sheet (DBEF), has a constant value without dependence on a lamp luminance. The relative luminance of optical components in 12-lamps BLU is lower than that in 18-lamps backlight. The light transmission rate, the relative luminance of liquid crystal display panel with the luminance 100 % of backlight, is 7.14 % in the use of DBEF and BEF, 6.12 % in the use of only DBEF, and 3.21 % in the use of only BEF. Those Data obtained in this experiment for the lamps and optical components, are the design parameters for the LCD backlight.

• Journal of Distribution Research
• /
• v.6 no.1
• /
• pp.1-21
• /
• 2001

This study introduced the components of apparel store, which include product and service factor to reflect the modified conception of service. The purposes of this study were to investigate the dimensions of the components of apparel store and to examine consumers' rating of importance on the components of apparel store. In addition, this study explored the effect of clothing involvement and demographic variables on importance perception. Data were collected via a questionnaire from young adult females in their twenties. The results of this study revealed five dimensions of service factor: environmental service, salesperson service, attitude and policy service related to exchange and refund, policy service related to promotion, and policy service related to convenience. Factors related to product were identified price, quality, variety, fashion, design and brand. Attitude and policy service related to exchange and refund is the most important factor that consumer perceived. Salesperson service and product quality were the second important factors. The relatively important factor in each service dimension was this : display in the environmental service, the ability of salesperson to resolve customer's complaints in the salesperson service, sales person’s courtesy in managing exchange or refund in policy service. Clothing involvement and demographic variables do affect consumers’perception on importance.