• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.44-48
• /
• 2021

Semiconductor inspection equipment makes components using materials with insulating properties for functional inspection including current and voltage of semiconductor parts. A representative insulating material is plastic, and plastic is made of a component through an injection process using plastic pellet. When plastic pellets contain excessive moisture, problems such as performance degradation and product surface defects occur. To prevent this, pre-drying is essential, and the heat convective type is the most applied. However, the heat convective type has a problem of low consumption efficiency and a long drying time. Recently, many studies have been conducted on a drying method using microwaves due to high energy efficiency. In this paper, drying was performed using a microwave for drying PC pellets. Energy consumption and drying efficiency analyzed by set up an experimental apparatus of heat convective, microwave, and hybrid(heat convective + microwave) types. It was confirmed that energy consumption and drying efficiency were high when drying using microwaves, and it was confirmed that the hybrid method improved drying performance compared to the heat convective method. It is expected that the research results of this paper can be used as basic data for drying plastic pellets using microwave.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.45-49
• /
• 2023

When blockchain technology, which shows various applicability, is utilized as a component of a database system, the characteristics of open verification and integrity/transparency of blockchain technology can bring new functionalities or enhanced results to the existing database system. However, when applying this blockchain technology to a database system, the cost versus expected effect in various performance perspectives must be evaluated. These costs include execution time and required storage space, and the performance of the converged system may vary in analysis method depending on the configuration method of the characteristics of the blockchain. This paper aims to propose an analysis model for the entire architecture by considering aspects that are not considered in the performance analysis models of database systems and the unique characteristics of blockchains. In doing so, we are trying to build a theoretical framework as an important conceptual technique that should be considered in the evaluation process of the performance results that can be obtained through the utilization of blockchain components in database systems. What we hope is that this work is expected to provide a useful foundation for researchers interested in the convergence of database systems and blockchain technology in order to construct a system with new future functionalities.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.112-119
• /
• 2023

In urban environments, signals of Global Positioning System (GPS) can be blocked and reflected by tall buildings, large vehicles, and complex components of road network. Therefore, the performance of the positioning system using the GPS module in urban areas can be degraded due to the loss of GPS signals necessary for the position estimation. To deal with this issue, various localization schemes using inertial measurement unit (IMU) sensors, such as gyroscope and accelerometer, and Bayesian filters, such as Kalman filter (KF) and particle filter (PF), have been designed to enhance the performance of the GPS-based positioning system. Among Bayesian filters, the PF has been widely used for the target tracking and vehicle navigation, since it can provide superior performance in estimating the state of a dynamic system under nonlinear/non-Gaussian circumstance. This paper presents a positioning system that uses the double-stacked particle filter (DSPF) as well as the accelerometer, gyroscope, and GPS receiver on the smartphone to provide higher pedestrian positioning accuracy in urban environments. The DSPF employs a nonparametric technique (Parzen-window) to create the multimodal target distribution that approximates the posterior distribution. Experimental results show that the DSPF-based positioning system can provide the significant improvement of the pedestrian position estimation in urban environments.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.1-10
• /
• 2016

This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single two-dimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.

• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.422-426
• /
• 2008

The effects of an addition of $ZrO_2$ on the microstructure and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. MgO + a 200 ppm $ZrO_2$ protective layer prepared by e-beam evaporation exhibited a secondary electron emission coefficient ($\gamma$) that was improved by 21% compared to that of a pure MgO protective layer. The relative density and Vickers hardness increased with a further addition of $ZrO_2$. These results suggest that the discharge properties and optical properties of MgO protective layers are closely related to the relative density and Vickers hardness. The good optical and electrical properties of $\gamma$, at 0.080, a grain size of $19\;{\mu}m$ and an optical transmittance of 91.93 % were obtained for the MgO + 200 ppm $ZrO_2$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.170-170
• /
• 2010

Thin-film transistors (TFT) have become the key components of electronic and optoelectronic devices. Most conventional thin-film field-effect transistors in display applications use an amorphous or polycrystal Si:H layer as the channel. This silicon layers are opaque in the visible range and severely restrict the amount of light detected by the observer due to its bandgap energy smaller than the visible light. Therefore, Si:H TFT devices reduce the efficiency of light transmittance and brightness. One method to increase the efficiency is to use the transparent oxides for the channel, electrode, and gate insulator. The development of transparent oxides for the components of thin-film field-effect transistors and the room-temperature fabrication with low voltage operations of the devices can offer the flexibility in designing the devices and contribute to the progress of next generation display technologies based on transparent displays and flexible displays. In this thesis, I report on the dc performance of transparent thin-film transistors using amorphous indium tin zinc oxides for an active layer. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium tin zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium tin zinc oxides was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 4.17V and an on/off ration of ${\sim}10^9$ operated as an n-type enhancement mode with saturation mobility with $15.8\;cm^2/Vs$. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium tin zinc oxides for an active layer were reported. The devices were fabricated at room temperature by RF magnetron sputtering. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.67-80
• /
• 2013

Purpose - This study aims to establish the relationships among brand equity, brand attitudes, and Visual Merchandising (VMD) in bakery stores. The results will help bakery franchisees and franchisers in devising appropriate strategies for successfully managing their bakery shops. Research design, data, and methodology - The VMD model for bakery shops comprises harmony, attractiveness, suitability, pandemic, functionality, and reliability. Further, brand equity encompasses brand awareness, perceived quality, and brand image. In this study, the VMD factors of bakery shops are used as independent variables, while brand equity and brand attitude are used as dependent variables. This study aims to ascertain the extent of the influence VMD components of bakery shops have on brand equity and brand attitude. Regression analysis was used to verify those effects. The measurement items, deemed reliable and valid in a previous study, were modified for this study. Questionnaires were distributed to 500 consumers nationwide, of whom 340 were used for the sample. The SPSS 19.0 statistical program was used for the analysis. Results - First, among the VMD bakery shop components, harmony, attractiveness, and pandemic have a positive impact on brand equity (brand awareness and brand image). Second, amongst the VMD components of bakery shops, attractiveness, pandemic, and reliability have a positive impact on brand equity (perceived quality). Third, amongst the VMD components of bakery shops, harmony, attractiveness, and reliability have a positive impact on brand attitude. Fourth, brand equity (brand awareness, brand image, and perceived quality) have a positive effect on brand attitude. Conclusions - This study identifies the relationships between the VMD components of a bakery shop and brand equity and attitude in order to propose a new model. The study has several practical implications. First, the development of brand equity and management can be important components in bakery shops' determination of whether their VMD components have an impact on brand equity. Second, among VMD components, harmony and attractiveness have a positive influence on the choice of bakery shop, while reliability and pandemic have a partly positive influence on the choice of bakery shop. Therefore, store atmospheres should be attractively designed, and store menus and interiors should be reviewed periodically to conform to the latest trends. This study suggests marketing strategies for brand equity formation. First, providing collateral product quality, hygiene, and safety benefits as well as product offerings to complement the season and employees' services should be considered. Second, display methods, illumination designs, and new product ideas should be periodically reviewed. Third, these should complement the overall harmony of the interior and exterior and of the store atmosphere in order to be attractive. Funds should thus be dedicated specifically for the facilities and their interiors. Fourth, it is necessary to build a friendly and relaxed image that can be easily called to mind by the customers.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.23-27
• /
• 2007

Rotary stages in semiconductor, display industry and many other fields require challenging accuracy to perform their functions properly. Especially, Axis of rotation error on rotary system is significant; such as the spindle error motion of the aligner, wire bonder and inspector machine which result in the poor quality products. To evaluate and improve the performance of such precision rotary stage, undesired movements on the other 5 degrees of freedom of the rotary stage must be measured and analyzed. In this paper, we have measured the three translations and two tilt motions of the worm gear type spindle with high precision capacitive sensors. To obtain the radial error motion, we have used Donaldson's reversal technique. And the axial components of the spindle tilt error motion can be obtained accurately from the axial direction outputs of sensors by Estler face motion reversal technique. Further more we have designed and developed the sensor mounting jig with standard cylinder for reversal method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.71-78
• /
• 2005

This paper proposes a novel multi-level energy recovery sustaining driver for AC PDP(Plasma Display Panel), which solves the problems of the conventional multi-level sustaining driver. While the conventional circuit improves the voltage md current stress of the switching elements in Weber circuit not only there are parasitic resonant currents between resonant inductors and parasitic capacitance and hard switching, but also the changing period between 0 and sustain voltage is too long. Comparing the proposed circuit with the conventional circuit, the number of components are reduced and the parasitic resonant currents in resonant inductors are eliminated Moreover the hard switching problem is solved by using CIM(Current Injection Method) and the operating frequency will be high as much as possible by removing Vs/2 sustain period. And the circuit operations of the proposed circuit are analyzed for each mode and the validity is verified by the simulations using PSpice program.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.87-91
• /
• 2010

Charged micro-particles are widely used as the key components for many electrical applications such as an e-paper, a touch panel, a printer toner and an electronic ink. Among them, the e-paper is an emerging reflective type display using the charged particles that has the advantages of the extremely low power consumption and sunlight readability. To create images on the e-paper, we confine black positively-charged and white negatively-charged particles between bottom and top electrodes and selectively apply the electric field. When the Coulomb force by an applied electric field is greater than the adhesion force between the charged particle and the electrode, the particles' transition happens resulting in the change of color between black and white. Therefore, the adhesion force is a very important factor for designing and estimating e-paper's operation. In this study, we constructed a basic model for particle's transition and an adhesion force equation describing particle's transition with three different forces: electrostatic image force, Van der Waals force and gravitational force. The simulation results showed that the gravitational force is negligible for the interesting range for the charge and the radius, and the adhesion force can be strongly dependent on the particle's charge and radius.