• 한국지능시스템학회논문지
• /
• 제19권6호
• /
• pp.743-748
• /
• 2009

본 논문은 2차원 연속 웨이블릿을 이용하여 조명에 의한 불균일한 휘도성분을 제거하여 TFT Display 핵심 부품인 편광필름 영상내의 결함을 검사 할 수 있는 방법을 제안한다. 영상 신호는 불균일한 휘도 분포와 노이즈 신호, 그리고 결함 신호로 구성되어 있다. 영상의 2차원 웨이블릿 변환은 스케일이 다른 여러 성분이 중첩된 다해상도 구조를 형성한다. 본 논문에서는 1차원 미분 가우시안 웨이블릿을 적용하여 영상에 중첩되어 있는 다해상도 성분 중 배경 휘도 성분을 효율적으로 추출하여 제거하는 전처리 기법을 제안한다. 이를 이용하여 원 영상에서 배경 성분을 분리할 수 있어 보다 신뢰성 있게 결함을 검출할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.86-93
• /
• 2011

To minimize the cost and power consumption of PDP TV, a practical sustain circuit topology is presented with an address-and-display-period-separated driving scheme. The proposed sustain driver employs bidirectional switches to reduce the number of components. Operational principles and corresponding features are illustrated and compared with the conventional approach. The valuable contributions of the proposed high-performing sustainer has been proven by computer-aided simulations and experiments by using a prototype equipped with 7.5-inch diagonal panel operated at 200 kHz switching frequency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1326-1329
• /
• 2006

In this paper, we propose a non-linear interpolation of chrominance components based on the property of luminance signals to display color images effectively. The proposed method is more useful, in particular, for the images including stair-typed signal changes around edges. Experimental results show that the proposed method is superior to conventional methods in both objective and subjective performance.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.13-17
• /
• 2003

An adaptor is designed for chamber impedance measurement of plasma process. Copper rod, fixed board and compensation circuit are the major components of the adaptor. An adaptor can be to measure chamber impedance on time unless stopping a process and Data to measure can do the database. We can use it to a criteria data for a failure diagnosis. So developed adaptor could be used for diagnosis the plasma process chamber in semiconductor industry.

• 세라미스트
• /
• 제21권1호
• /
• pp.4-11
• /
• 2018

Display is an essence in human-machine communication interface. As mobile environment such as internet of things (IOT) and Artificial Intelligence (AI) progress, importance of display increases. Here we review research trend in flexible organic light emitting displays (OLEDs). This review article covers all the components consisting of flexible OELDs and shows direction of the recent research. This paper would be helpful for readers and researchers working in this field and provide perspective for future displays.

• 전기전자학회논문지
• /
• 제25권3호
• /
• pp.544-547
• /
• 2021

Recently, various display products are being applied to automobiles. In the process of acquiring an image from a display product, a large amount of additive white Gaussian noise(AWGN) is generated. Generally known denoising techniques focus on removing noise, so detailed components including image information are proportionally lost in the process of removing noise. The algorithm proposed in this paper proposes a method to effectively remove noise while preserving the detail of image information.

• Current Photovoltaic Research
• /
• 제2권1호
• /
• pp.14-17
• /
• 2014

In this paper, indium reduced materials for transparent conductive electrodes (TCE) were fabricated and their physical properties were evaluated. Two of materials, indium-zinc-tin oxide (IZTO) and aluminum (Al) were selected as TCE materials. In case of IZTO nanoparticles, composition ratios of In, Zn and Sn is 8:1:1 were synthesized. Size of the synthesized IZTO nanoparticles were less than 10 nm, and specific surface areas were about $90m^2/g$ indicating particle sizes are very fine. Also, the IZTO nanoparticles were well crystallized with (222) preferred orientation despite it was synthesized at the lowered temperature of $300^{\circ}C$. Composition ratios of In, Zn and Sn were very uniform in accordance with those as designed. Meanwhile, Al was deposited onto glass by sputtering in a vacuum chamber for mesh architecture. The Al was well deposited onto the glass, and no pore was observed from the Al surface. The sheet resistance of Al on glass was about $0.3{\Omega}/{\square}$ with small deviation of $0.025{\Omega}/{\square}$, and adhesion was good on the glass substrate since no pelt-off part of Al was observed by tape test. If the Al mesh is combined with ink coated layer which is consistent of IZTO nanoparticles, it is expected that the good and reliable metal mesh architecture for TCE will be formed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1622-1624
• /
• 2007

In order to realize effective p-type doping in ZnO thin films, ZnO films were deposited on P-doped Silayers by RF-magnetron sputter deposition technique and annealed at various temperatures. The result indicated that ZnO film annealed at $700^{\circ}C$ showed p-type conduction with a high carrier concentration in the order of $10^{19}\;cm^{-3}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1116-1119
• /
• 2008

We developed phosphorescent white OLEDs with high efficiency and color stability. By engineering device architecture in which confined excitons within the emissive layer by using adequate interlayer and balanced recombination of charge carriers by using stepwise hole transporting layer system, these WOLEDs showed power efficacy of 43.6 lm/W with CRI = 62 and 36 lm/W with CRI = 72 at $100\;cd/m^2$ without outcoupling enhancements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.67-70
• /
• 2009

Printed electronics are emerging technology to realize various microelectronic devices via a cost-effective method. Here we introduce high performance inkjet printed polymer field-effect transistors and application to complementary integrated circuits with p-type and n-type conjugated polymers. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. The device optimization and performances of various integrated circuits, e.g., complementary inverters and ring oscillators will be mainly discussed in this talk.