• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.148-150
• /
• 2009

We have developed 15 inch, 130 blocks local dimming FEL using printed CNT emitters, in which multiple FE blocks were built with a common gate electrode. Cathode electrode formed by the double-metal technique, in which an insulator is interposed between the addressing bus and cathode electrode.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.

• ETRI Journal
• /
• 제35권4호
• /
• pp.571-577
• /
• 2013

The fabrication of a thin-film transistor backplane and a liquid-crystal display using printing processes can eliminate the need for photolithography and offers the potential to reduce the manufacturing costs. In this study, we prepare contact via structures through a poly(methyl methacrylate) polymer insulator layer using inkjet printing. When droplets of silver ink composed of a polymer solvent are placed onto the polymer insulator and annealed at high temperatures, the silver ink penetrates the interior of the polymer and generates conducting paths between the top and bottom metal lines through the partial dissolution and swelling of the polymer. The electrical property of various contact via-hole interconnections is investigated using a semiconductor characterization system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.470-470
• /
• 2012

Organic thin film transistors (OTFTs) backplane constitute the active elements in new generations of plastic electronic devices for flexible display. The overall OTFTs performance is largely depended on the properties and quality of each layers of device material. In solution based process of organic semiconductors (OSCs), the interface state is most impediments to preferable performance. Generally, a threshold voltage (Vth) shift is usually exhibited when organic gate insulators (OGIs) are exposed in an ambient air condition. This phenomenon was caused by the absorbed polar components (i.e. oxygen and moisture) on the interface between OGIs and Soluble OSCs during the jetting process. For eliminating the polar component at the interface of OGI, the role of high vacuum seasoning on an OGI for all solution processable OTFTs were studied. Poly 4-vinly phenols (PVPs) were the material chosen as the organic gate dielectric, with a weakness in ambient air. The high vacuum seasoning of PVP's surface showed improved performance from non-seasoning TFT; a $V_{th}$, a ${\mu}_{fe}$ and a interface charge trap density from -8V, $0.018cm^2V^{-1}s^{-1}$, $1.12{\times}10^{-12}(cm^2eV)^{-1}$ to -4.02 V, $0.021cm^2V^{-1}s^{-1}$, $6.62{\times}10^{-11}(cm^2eV)^{-1}$. These results of OTFT device show that polar components were well eliminated by the high vacuum seasoning processes.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.107-113
• /
• 2012

This paper proposes a PDS(Power Transfer Display separation) method for AC-PDP. The proposed PDS method can transfer power and perform an energy recovery by a power conversion circuit operates differently depending on the time. As a result, it uses less of components than conventional PDP power supply and sustain circuit use. Moreover, the manufacturing process can be streamlined. Therefore, the proposed method is suitable for low cost PDP module. To confirm the operation, validity and features of the proposed PDS method, experimental results from a prototype for 42-in diagonal PDP are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.895-897
• /
• 2008

ZnO films were fabricated using rf-magnetron sputter deposition process with different $N_2$ ambient. N-content in N-doped ZnO films was less than 1%. The wavelength of the highest intensity PL peak of N-doped ZnO was shifted to higher wavelength with increasing $N_2$ flow rate in the deposition ambient. These results indicated that the optical property of ZnO was significantly affected by the defect level created by doping with a very small amount of N.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.417-428
• /
• 2017

본 논문에서는 항공기 조종사 지능형 헬멧시현시스템(IHDS, Intelligent Helmet Display System)의 아키텍쳐 설계, 단위 구성품 설계, 핵심 소프트웨어 설계내용(헬멧 자세추적, 고도오차 보정 소프트웨어)을 기술하며, 단위시험 및 통합시험에 대한 결과를 기술한다. 세계적인 최신 헬멧시현시스템 개발 추세를 반영하여 3차원 전자지도 시현, FLIR(Forward Looking Infra-Red) 영상시현, 하이브리드형 헬멧자세추적, 바이저 반사형광학계, 야시카메라 영상시현 및 경량 복합소재 헬멧쉘 등의 사양을 설계에 적용하였다. 특히 3차원 전자지도 데이터의 고도오차 자동보정 기법, 고정밀 영상정합 기법, 다색(Multi-color) 조명광학계, 회절소자를 이용한 투과형 영상발광면, 헬멧자세 추정시간을 최소화하는 추적용 카메라, 장/탈착형 야시카메라, 머리 밀착용 에어포켓 등의 신개념의 설계를 제안하였다. 모든 시스템 구성품의 시제작을 완료한 후 단위시험과 시스템 통합시험을 수행하여 기능과 성능을 검증하였다.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.369-372
• /
• 2008

Black matrix and Ag electrode with uniform line pitches were successfully fabricated through the photolithographic process by using the photosensitive black pastes and Ag pastes with optimized photosensitive properties for high resolution PDPs. The photosensitivity of the black and Ag pastes in the photolithographic process was investigated with the variation of photosensitive BM and Ag pastes and the photolithography process conditions. The important components and formulation of the photosensitive BM and Ag paste we discussed.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권1호
• /
• pp.7-21
• /
• 2017

액상의 전자재료를 인쇄라는 저비용 패턴방식을 이용하여 전자 혹은 디스플레이 부품 및 제품을 대량 생산하는 것을 인쇄전자라고 하며, 2007 년을 전후하여 국내에서도 본격적으로 저비용 전자 및 디스플레이 부품 및 제품을 제조하기 위한 소재, 공정 및 장비에 대한 연구가 시작되었다. 본 연구에서는 수~수십 마이크로미터급의 해상도를 가지는 전자 혹은 디스플레이 부품 및 제품을 생산할 수 있는 초정밀 인쇄전자 장비들에 대해 소개하도록 한다.